• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.389-393
• /
• 2007

There has been many researches using LiDAR(Light Detection And Ranging) data. There has been many other researches through out the world using the 3 dimensional spatial data in various fields. In this research, Using lidar data and digital images, we have extracted the position of the power-transmission line and created 3 dimensional models. The presented method is more efficient than field surveying and it can also be used lot monitoring change in the environment

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.179-182
• /
• 2007

In this study, we proposed a way to detect trees using virtual grid and to discriminate vertical wall points from building tops based on effective segmentation of LIDAR point cloud utilizing scan line characteristics. Trees were detected by their surface roughness value calculated based on virtual grid and vertical building wall points were discriminated from building tops with one dimensional filtering of scan line during segmenting point cloud. In results, we could distinguish trees from buildings and bind virtical wall points to prevent them from faltly acting on point segmentation process.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.04a
• /
• pp.187-194
• /
• 2002

본 논문에서는 SPOT 입체영상을 이용하여 광범위한 지역의 DEM을 제작할 경우 DEM 모자이크 과정에서 발생할 수 있는 접합선(seam-line)을 최소화할 수 있는 방법을 연구하였다. 지상의 60km$\times$60km 영역을 촬영할 수 있는 SPOT 위성의 입체 영상으로부터 구성한 단일 모델은 일반적으로 관심 있는 지역의 DEM을 제작하기에 충분히 넓은 지역을 포함할 수 있다. 그러나 광범위한 지역의 DEM 제작을 위해서는, 각각의 입체영상을 통해 제작된 DEM들을 접합해야 하며, 이 때 발생되는 접합선을 효과적으로 제거하는 작업이 필요하다. 이를 위해 SPOT 위성영상의 블록 조정 방법을 이용하여 종횡접합모델을 구성하고 중복되는 인접한 SPOT DEM간의 표고값을 일치시키므로써 DEM 접합선의 발생을 최소화하여 모자이크시 작업량을 줄이고자 한다. 본 논문에서는 기존의 지상기준점과 추가로 관측한 영상접합점을 이용하여 종횡접합 블록을 구성하고 광속조정 방법을 적용하여 블록에 포함된 위성영상의 외부표정요소를 계산하였다. 블록모델을 이용하여 DEM을 제작할 경우 접합선 탐색 및 blending 작업 없이 단순중첩 방법으로도 DEM 모자이크 작업을 빠르게 수행할 수 있음을 확인하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.5 no.1
• /
• pp.23-31
• /
• 1987

Maps need the suitable map projection according to the scale of its seeing that the distortion is increasing between the projected geodesic line on the map and the ellipsoidal line owing to the scale up. In this paper, the optimum map projection for the large scale mapping as well as analysis of current mapping in Korea is proposed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.2
• /
• pp.185-193
• /
• 1997

While close range photogrammetry has been widely applied for static deformation analysis, video cameras have many characteristics that make them the sensors of choice for dynamic analysis of rapidly changing situations. They also have limitations. The aim of this research is to explore the potential of a video system for monitoring dynamic objects. A pilot system consists of two camcorders, VCR, and PC with frame grabber. To estimte the performance of this system for moving objects, a car was imaged covering several phases when starting to drive. The sequential images of a moving car were recorded on VCR. 15 images per second were digitized in an off-line mode by frame grabber. The image coordinates of targets attached to the rear bumper of a car were acquired by IDRISI, and the object coordinates were derived based on DLT. This research suggests that home video cameras, PC, and photogrammetric principles are promising tools for monitoring of the moving objects and vibrations as well as other time dependent situations.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.5
• /
• pp.441-448
• /
• 2011

Lately, digital restitution was became common using digital aerial photos. Therefore, we can obtain three-dimensional data. As a plotting-maker is checked by naked eye, plotting original data is very useful for making reliable three-dimensional data including contour and elevation point layers. In this study, we want to make precise and accurate digital elevation model using plotting original data. Contour and elevation point layers was extracted in digital map and break line was extracted in plotting original data. And then, compared both of results. For comparison, we selected slight slope and complex topography area like a residence area, mountain and agricultural land. We extracted break line deleting layer until obtaining ideal digital elevation model. As the results, We could extract contour, elevation points, eight road and two boundary layers using break lines. And We could obtain precise elevation model. Editing break lines, the distortion of digital elevation model could be minimized in the complex and sharp slope area.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.6
• /
• pp.453-460
• /
• 2017

High voltage power transmission lines have been to keep the proper dip for maintenance. Powerline dips at a random point are conventionally measured by the direct or indirect observation but it is not only unsafe but labor-intensive. Therefore in this study we applied the photogrammetric technique to remotely measure the powerline dips. Since it is not easy to extract conjugate points from linear powerlines, we exploited the epipolar lines acrossing the powerlines for 3D mapping of the powerlines and dip measurements. The vertical mapping accuracy estimated at two field-surveyed power line points was 15~16cm that are within 5% of deflection at the points and less than 3% of the powerline dip.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.04a
• /
• pp.219-228
• /
• 2002

Because western sea on the shore development is threatening sea ecosystem by decrease of silt and large size land-reclamation work by industrialization causes surrounding weather change and sea change, generate much changes bottom of the sea topography and coastline. Also, is influencing to route for safe entry into port of ship, departure. Therefore, this research did 0m boundary line, anxiety 2m line which appear to coastline of land portion and the border of silt using sea base level of lowest low tone side that is base line that appear because of sea waves to basis data numerical value Tuesday, numerical value by divide drawing that is changed to 4 area and analyze change degree of new airport construction and new town development, seashore by western sea district along the coast development of tide embankment construction and so on and bottom of the sea recognize.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.2
• /
• pp.183-188
• /
• 2001

Topographic map is important for the additional detailed construction planning followed by slope sliding. It is a base map that is used to compute the volume of soil, the cost of construction, and check the stability in the area of slope sliding. In this study, 3D topographic data were acquired appling softcopy photogrammetry to the dangerous slope, and the method which can transform these data to the same coordinates system as early TM coordinates was designed. There was a problem when the one meter contour line was made by analysing the image taken from the distance three hundred meters. By solving this problem, this could be used as important data for the planning of road expansion construction. It is expected to be useful for the measurement of various dangerous area in civil engineering works.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.2
• /
• pp.117-128
• /
• 1999

A Simple tree-structured line simplification method, which exactly follows the Douglas-Peucker algorithm, has a strength for its simplification index to be involved into the hierarchical data structures. However, the hierarchy of simplification index, which is the core in a simple tree method, may not be always guaranteed. It is validated that the local property of line features in such global approaches as Douglas-Peucker algorithm is apt to be neglected and the construction of hierarchy with no thought of locality may entangle the hierarchy. This study designed a new approach, CALS(Convex hull Applied Line Simplification), a) to search critical points of line feature with convex hull search technique, b) to construct the hierarchical data structure based on these critical points, c) to simplify the line feature using multiple trees. CALS improved the spatial accuracy as compared with a simple tree method. Especially CALS was excellent in case of line features having the great extent of sinuosity.