• 보존과학연구
• /
• 통권14호
• /
• pp.35-44
• /
• 1993

The way of prevention for the continuous corrosion progress in iron antiquities after excavation and conservation treatment have been studied. The corrosion occuring have been found the oxidation of ferrous ions in the presence of chloride. The consideration to control the activity of chloride is important of controling relative humidity for the stable environment of the storage. One of the method that keeps archeological iron antiquities recommend the storage of special vinyl film(poly-vinyl alcohol film) with silica gel to control the relative humidity. Although this method is not permanent, it's very well efficiency of economy and convenience at present.

• 통합자연과학논문집
• /
• 제5권4호
• /
• pp.233-236
• /
• 2012

In this study, PEDOT thin films polymerized with Iron(III)tosylate ($Fe(PTS)_3$) and grown on acetic acid-catalyzed 3-aminopropyltriethoxysilane self-assembled monolayer (APS-SAM) surfaces by VPP method have been investigated. PEDOT thin films were synthesized on APS self-assembled $SiO_2$ wafer surface at two different concentrations (20 wt% and 40 wt%) and growth time (3 and 30 minutes), and then they were compared. PEDOT vapour phase-polymerized with 40 wt% $Fe(PTS)_3$ oxidant completely formed a thin film on acetic acid-catalyzed APS-SAM surface while with 20 wt% $Fe(PTS)_3$ did not at all. It means that the oxidant can be uniformly coated on acetic acid-catalyzed APS-SAM surface at the 40 wt% concentration, which gives rise to the uniform growth of PEDOT thin film on it.

• 한국주조공학회지
• /
• 제40권6호
• /
• pp.135-145
• /
• 2020

Aluminum cast iron has excellent oxidation resistance, sulfurization resistance, and corrosion resistance. However, the ductility at room temperature is insufficient, and at temperatures above 600?, the strength drops sharply and practicality is limited. In the case of heat-resistant cast iron, high-temperature materials containing Cr and Ni account for 30 to 50% or more. However, these high-temperature materials are expensive. Aluminum heat-resistant cast iron is considered as a substitute for expensive heat-resistant materials. Oxidation due to the aging temperature and holding time conditions increases more in 0 wt.% Al-cast iron than in 2 and 4 wt.% Al-cast iron according to oxidized weight and gravimetric oxide layer thickness measurements. As a result of observing the cross-section of the oxide layer, it was found to contain 0 wt.% of Al-cast iron silicon oxide-containing SiO₂ or Fe₂SiO₄ oxide film. In cast iron containing aluminum, the thickness of the internal oxide layer due to aluminum increases as the aging temperature and retention time increase, and the amount of the iron oxide layer generated on the surface decreases.

• 대한전자공학회논문지
• /
• 제27권9호
• /
• pp.1393-1401
• /
• 1990

The physical properties of \ulcorner-Fe2O3 raw materials were investigated. \ulcorner-Fe2O3/Pd thick film gas sensors were fabricated with screen-printing method and their electrical and sensitivity characteristics were analyzed. The irreversible phase transition from \ulcorner-Fe2O3 to \ulcorner-Fe2O3 occured at 500\ulcorner. At this time, the cation of tetrahedral sites moved into the octahedral sites. \ulcorner-Fe2O3 raw materials contained only trivalent and no divalent iron. Thecontents of divalent iron (Fe+\ulcorner were increased as detecting gases were adsorbed. The addition of Pd (1w/o) to \ulcorner-Fe2O3 enhanced the sensitivity to gases. The sentivity of \ulcorner-Fe2O3/Pd(1w/o) thick film to 5000ppm C4H10 was 97% at the operating temperature of 300\ulcorner.

• 한국물환경학회지
• /
• 제30권3호
• /
• pp.292-297
• /
• 2014

We synthesized the self-organized nanoporous oxide with potentiostatic anodization of iron foil. The iron oxide nanocomposite (INCs) were fabricated in 1M $Na_2SO_4$ containing 0.5wt% NaF electrolyte holding the potential at 20, 40 and 60 V for 20min, respectively. Field Emmision Scanning Electron Microscopy (FESEM) and X-ray Diffractometer (XRD) were used to evaluate the micromorphology and crystalline structure of INC film. Also, this study was performed to evaluate the fenton reaction using INC film with hydroperoxide for degradation of cyanide dissolved in water. In case of INC-40V in the presence of $H_2O_2$ 3%, the first-order rate constant was found to be $1.7{\times}10^{-2}min^{-1}$, and indicated to be $1.2{\times}10^{-2}min^{-1}$ on commercial hematite powder. This result is shown to be good performance enough to replace the powder type for treatment of wastewater.

• 한국표면공학회지
• /
• 제38권4호
• /
• pp.156-162
• /
• 2005

Nickel-iron nanocrystalline alloys with different compositions and grain sizes were fabricated by electro-plating for MEMS devices. The iron content of the deposits was changed by varying the nickel/iron ion ratio in the electrolyte. X-ray diffraction (XRD) analysis was applied for measuring the strength of the texture and grain size of the deposits. The nickel/iron atom ratio of the deposits was analyzed by EDS. The hardness of the alloys was evaluated by Vickers hardness indenter. The internal stress of the deposits was measured by Thin Film Stress Measurement using Stoney's formula. Surface morphology and roughness were investigated by Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). The results of this study revealed that at a grain size of approximately $17\~24$nm the hardness, internal stress and roughness depend strongly on the iron content. With increasing the iron content, the hardness and internal stress of the deposits increased. An excellent correlation between the increase in the internal stress and the loss of (200) texture was found.

• 대한화학회지
• /
• 제56권6호
• /
• pp.673-678
• /
• 2012

변전위법과 선형분극법을 이용하여 Borate 완충용액에서 철의 부식에 대한 대기의 영향을 조사하였다. 철의 부식은 용액 속에 녹아있는 산소의 양에 크게 영향을 받았다. 용액에 녹아 있는 산소의 환원반응으로 환원전류가 증가하여 부식전위가 양의 방향으로 이동하였다. 물 또는 산소의 환원 반응에 의하여 생성된 $OH^-$ 이온은 철 전극의 전기이중층에 $OH^-$ 이온의 농도를 증가시켜 철 전극에 $OH^-$ 이온의 흡착을 용이하게 하였다. 철 전극 표면에 $OH^-$ 이온의 흡착은 Langmuir isotherm 또는 Temkin logarithmic isotherm을 이용하여 설명할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제18권10호
• /
• pp.1120-1123
• /
• 1997

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.875-876
• /
• 2006

Superconducting fault currents(SFCLs) are expected to improve not only reliability but also stability of power systems. The analysis on current limiting operations of the flux-lock type SFCL, which consists of a flux-lock reactor wound an iron core and a YBCO thin film, was compared the open-loop with the closed-loop iron core of the subtractive polarity winding. In the SFCL, operation characteristics could be controlled by adjusting the inductances and the winding directions of the coils, then magnetic field induced in the iron core. The current limiting characteristics under the same experimental conditions were generated regardless of the iron core conditions. We confirmed that capacity of the SFCL was increased effectively by the closed-loop iron core. However, the power burden of the system could be lowered by the open-loop iron core.

• 청정기술
• /
• 제27권3호
• /
• pp.240-246
• /
• 2021

COF (Chip on film)용 폐에칭용액 내 구리가 약 3.5% 함유되어 있으며, 철 시편을 사용한 시멘테이션을 통해 구리를 회수하고자 하였다. 철 시편 3종류(플레이트, 칩, 분말)에 따른 시멘테이션 반응에 미치는 영향을 조사하였으며, 구리의 회수율을 높이고자 구리에 대한 철의 몰 비를 변수로 하였다. 반응 전·후 용액 내 시간에 따른 구리 농도의 변화를 확인하였으며, 몰 비를 증가시킬수록 초기 용액 내 구리 함량이 급격히 줄어드는 경향이 나타났다. 상온에서 1시간의 시멘테이션 반응 후 철 시편의 비표면적 값이 큰 플레이트, 칩, 분말 순으로 구리의 회수율이 증가하였다. 회수된 분말은 X선 회절 분석기(X-ray diffraction, XRD), 주사전자현미경(scanning electron microscopy, SEM) 및 에너지 분산형 분광분석법(Energy-dispersive X-ray spectroscopy, EDM) 분석을 통해 결정상과 결정 형태를 확인하였으며, 철 분말의 경우에는 회수된 구리 분말에 미반응된 철 성분이 혼재하였다. 구리에 대한 철의 몰 비 4의 조건으로 철 칩을 사용하였을 때, 구리 회수율 약 98.4%로 최적 조건으로 달성하였다.