• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.313-318
• /
• 2004

The quality of aerial photograph is closely connected with the change of wether conditions like as cloud cover, visibility, drifted snow and so on. To solve some problems caused by wether condition, the related organizations in advanced nations have presented some standards of wether condition for aerial photography. In domestic case, the NGI has presented some standards based on the internal specification of aerial photography and the table of monthly weather condition, but it is not enough to make the quantitative and objective standards on aerial photography specification. In this paper, we proposed a method which can reflect domestic weather condition and make accurate estimation of the average number of clear days in one year for aerial photography.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.3
• /
• pp.111-122
• /
• 2002

European offset impact analysis of an electric vehicle was done using the robust design method. Section properties of some of the vehicle structure components which influence the european offset impact characteristics were chosen as the main factors fur the design. Eight factors were considered for the analysis: one with two level and seven with three level combinations comprising the L$\_$18/(2$^1$$\times$3$\^$7/) orthogonal array. It is shown that the sensitivities of the factors and the best combination of the factors can be obtained. One of the noteworthy results is that the design with the lower stiffness of the front components of engine room than the rear components can absorb more crash energy. Also it is shown that there exist interactions between some of factors considered.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.271-275
• /
• 1995

Chip control is a major problem in automatic machining process, especially in finish operation. Chip breaker is one of the important factors to be determined for the scheme of chip control. As unbroken chips are grown, there deteriorate quality of the surface roughness and process automation can be carried out. In this study, to get rid of chip curling problem while turning internal hole, optimal chip breaker is selected form the experiment. The experiment is planned with Taguchi's method that is based on the orthogonal arrary of design factor. From the respose table, cutting speed, feedrate, depth of cut, and tool geometry are major factors affecting chip formation. Then, optmal chip breaker is selected and this is verified good enough for chip control from the experiment.

• Journal of Korean Library and Information Science Society
• /
• v.40 no.2
• /
• pp.5-26
• /
• 2009

The purpose of this study aims to provide possible suggestions for the improvement KDC 5th ed. as a system. After analyzing and evaluating various devices of KDC 5th ed. such as schedules, common auxiliary tables, internal tables(omitted), notes, relative index, precedence order(omitted), alternatives, manual(omitted) and relocated table(omitted), suggestions for the improvement were proposed. If above suggestions are adopted, effective literature classification scheme which is suited to domestic circumstances will be certainly prepared.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.11 no.2
• /
• pp.22-26
• /
• 1974

To synthesize transition-sensitive asynchronous sequential circuits, D-type transition-sensitive flip-flop is used.4 new concept, a pair of input state is introduced and used to reduce the number of internal states. We proposed an algorithm to synthesize multiple-input change asynchronous sequential circuits directly from a primitive state table an6 demonstrated the method is better than the one which is due to Bredeson and Hulina and Others.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.33 no.4
• /
• pp.134-139
• /
• 1984

This paper presents the computer program to design the synchronous sequential logic circuit. The computer program uses the MASK method to get the circuit of optimal cost. The computer program takes as an input, the minimal reduced state transition table where each state has its internal code. As an output,the optimal design of synchronous sequential logic circuit is generated for each flipflop type of JK,T,D, and RS respectively. And these circuits for 4 flipflop types are evaluated and sorted in ascending order of their costs, so that the user can select the proper flipflop type and its circuit. Furthermore,the proposed computer program may be applied to state assignment with its facility of cost evaluation.

• ETRI Journal
• /
• v.33 no.3
• /
• pp.374-381
• /
• 2011

A simple and effective compression method is proposed for multiple-scan testing. For a given test set, each test pattern is compressed from the view of slices. An encoding table exploiting seven types of frequently-occurring pattern is used. Compression is then achieved by mapping slice data into codewords. The decompression logic is small and easy to implement. It is also applicable to schemes adopting a single-scan chain. Experimental results show this method can achieve good compression effect.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.2
• /
• pp.24-27
• /
• 1975

A Synthesis method for multiple-input change transition-sensitive asynchronous sequential circuits is proposed. Both internal states and output states are synthesized from primitive flow tables. It is Btown that cur realization is faster than that of Chuang's. It is pointed out that Chuang's realization of output states contains malfunctions. In this paper, output stales are easily realized from primitive flaw table by the method of controlled excitation.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.05a
• /
• pp.19-21
• /
• 2008

본 논문에서는 테이블 형이 아닌 스탠드형 테이블 탑 디스플레이에 대한 연구를 다루고 있다. 스크린에 대한 터치를 인식으로 입력을 받아들이므로 TouchFace III 라고 명명하고 있으며, 기존에 개발되었던 두 대의 테이블 탑 디스플레이와는 형태에서 차별을 두고 있다. TouchFace III 시스템은 FTIR(Frustrated Total Internal Reflection : 내부 전반사 장애 현상) 방식이 아닌 TouchLight방식과 HoloWall방식을 조합하여 시스템을 구성하였다. 그래서 스크린에서의 직접적인 손터치 뿐만 아니라, 스크린에 반사되는 손형상에 대한 제스처까지도 인식할 수 있도록 연구중에 있다. 이는 협업을 강조하는 테이블 탑 디스플레이의 컨셉에 어울리며 한 디바이스를 이용하여 동시에 여러사용자가 디바이스를 조작하는 것을 가능하게 한다.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.262-263
• /
• 2008

LCD 디바이스는 그 동작원리와 전기-광학적 특성에 의해 CRT와는 다른 감마곡선 특성을 갖고 있다. 대부분의 LCD디스플레이 디바이스들의 감마곡선은 CRT와는 달리 일관성을 갖지 않을 뿐 더러 흑백계조입력을 기준으로 하는 감마보정을 위해 RED, GREEN, BLUE 입력값을 세부적으로 조정할 때 각 계조입력에 대한 상관색온도가 일정한 값을 갖지 않아 LCD의 특성에 대한 모델링과 보정에 어려움이 있다. 또한, 애플사의 맥머신 그리고 실리콘 그래픽스사의 시스템과 같이 소정의 감마값을 전제로 해당 시스템의 내부참조테이블(internal look-up table)이 설계되어 각기 다른 시스템감마를 가지는 장치들에 의해 인코딩되어진 영상출력신호의 경우, 동일한 시스템을 갖추거나 시스템감마에 대한 역감마특성을 가진 디스플레이장치가 아닌 환경에서는 원본영상에 대한 왜곡은 더욱 커질 수 있다. 특히, 낮은 흑백계조입력에서의 색온도의 경우, 파장에 따라 서로 다른 감쇄성능을 가진 일반적인 컬러필터의 특성에 의한 누설광(light leakage)에 의해 결정되며, 이로 인해 색온도가 특정한 객을 띄는 현상이 발생한다. 본 논문에서는 LCD디스플레이의 감마곡선을 여러 가지 시스템감마에 대응할 수 있는 감마곡선예 일치시키고, 계조선형성을 동시에 개선하기 위하여 입력 디지털값과 삼자극치간 관계를 나타내는 여러 가지 컬러모델링 방법 중에서 PLCC(Piecewise Linear Interpolation assuming Constant Chromaticity coordinates)모델을 적용하고, 목표로 하는 감마곡선과 색온도를 만족하기 위한 새로운 입력값을 구한 후 이를 컬러참조테이블(color look-up table)예 적용하는 방법과 저계조에서의 색온도를 목표색온도에 근접시키는 방법을 제안한다.