• Applied Science and Convergence Technology
• /
• 제26권5호
• /
• pp.139-142
• /
• 2017

In this paper, InP-based InGaAs/InAlAs quantum cascade lasers(QCLs) providing nearly zero emission wavelength mismatch between the measured emission wavelength and the designed transition wavelength of QCLs is presented. The zero emission wavelength mismatch of QCLs influenced by both the accurate compositions and thicknesses of the low-pressure metal-organic vapor-phase epitaxy(MOVPE) grown InGaAs and InAlAs layers throughout the core and the abrupt composition transitions between InGaAs and InAlAs layers. The abrupt interfaces between InGaAs and InAlAs layers have been achieved throughout the core structure by means of controlling individually purged vent/run valves of a closed coupled showerhead reactor. In addition, maintaining substrate temperature constant during InGaAs/InAlAs core growth was a partial factor of uniformity improvement of QCLs. These approaches for reducing the possible discrepancies between the designed and MOVPE grown epitaxial structures could lead to improvement of QCL performance.

• 한국재료학회지
• /
• 제13권10호
• /
• pp.635-639
• /
• 2003

We investigated dry etching of GaAs and AiGaAs in a high density planar inductively coupled plasma system with BCl$_3$and BCl$_3$/Ar gas chemistry. A detailed etch process study of GaAs and ALGaAs was peformed as functions of ICP source power, RIE chuck power and mixing ratio of $BCl_3$ and Ar. Chamber process pressure was fixed at 7.5 mTorr in this study. The ICP source power and RIE chuck power were varied from 0 to 500 W and from 0 to 150 W, respectively. GaAs etch rate increased with the increase of ICP source power and RIE chuck power. It was also found that etch rates of GaAs in $15BCi_3$/5Ar plasmas were relatively high with applied RIE chuck power compared to pure 20 sccm $BCl_3$plasmas. The result was the same as AlGaAs. We expect that high ion-assisted effect in $BCl_3$/Ar plasma increased etch rates of both materials. The GaAs and AlGaAs features etched at 20 sccm $BCl_3$and $15BCl_3$/5Ar with 300 W ICP source power, 100 W RIE chuck power and 7.5 mTorr showed very smooth surfaces(RMS roughness < 2 nm) and excellent sidewall. XPS study on the surfaces of processed GaAs also proved extremely clean surfaces of the materials after dry etching.

• 대한물리의학회지
• /
• 제9권4호
• /
• pp.433-438
• /
• 2014

PURPOSE: The purpose of our study was to compare a 975-nm, 500-mW GaAlAs low-level laser therapy versus placebo low-level laser therapy with regard to the immediate changes on the myofascial trigger point of the dominant upper trapezius muscle in subjects with rounded shoulder posture. METHODS: Thirty-two male college students with rounded shoulder posture and shoulder pain consented to participate in the experiment. The subjects were randomly assigned to a 2-minute procedure with either an active GaAlAs low-level laser or a placebo GaAlAs low-level laser. The pressure-pain threshold and visual analog scale on tenderness at 3 kg were measured with an algometer before and after the laser treatments. RESULTS: The active GaAlAs low-level laser group showed significant changes in pressure-pain threshold and visual analog scale on tenderness at 3 kg (p<0.05). The placebo GaAlAs low-level laser group showed no significant changes in either pressure-pain threshold or visual analog scale on tenderness at 3 kg (p>0.05). CONCLUSION: An immediate effect was observed in pressure-pain threshold and visual analog scale on tenderness at 3 kg following a 2-minute application ($857.14J/cm^2$) of a 975-nm, 500-mW GaAlAs low-level laser to the myofascial trigger point of the dominant upper trapezius muscle in patients with rounded shoulder posture.

• Journal of the Optical Society of Korea
• /
• 제15권2호
• /
• pp.124-127
• /
• 2011

Quantum dots were designed within a GRIN-SCH(Graded index - Separate confinement Heterostructure) heterostructure to create a high power InAlAs/AlGaAs laser diode. 808 nm light emission was with a quantum dot composition of In0.665Al0.335As and wetting layer composition of Al0.2Ga0.8As by LASTIP simulation software. Typical characteristics of GRIN structures such as high confinement ratios and Gaussian beam profiles were shown to still apply when quantum dots are used as the active media. With a dot density of 1.0x1011 dots/cm2, two quantum dot layers were found to be good enough for low threshold, high-power laser applications.

• 대한전자공학회논문지
• /
• 제25권3호
• /
• pp.287-293
• /
• 1988

This paper calculates the band structure of the GaAs/(Al,Ga) As semiconductor superlttice with the interface3 grading, in consideration of different effective masses in each region. Including the effective masses, superlattice period, well and barrier widths, and the interface, the dispersion relation is derived, and the effects that the above parameters affect the subband (or miniband) structure of the superlattice and effective energy gap are investigated. It is particularly found that this case(ma<>mb<>mc) is significantly different from the same effective mass case(ma<>mb<>mc).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.316-318
• /
• 2003

양자우물 구조를 사용한 HEMT(High Electron Mobility Transistor)는 고속 스위칭 소자와 초고주파 통신용 소자 및 센서에에 우수한 동작특성을 갖고 있다. 본 논문에서는 AlInAs/InP HEMT의 heterostructure를 파동방정식과 Poisson 방정식을 self-consistent 한 방법으로 해석하였다. 파동방정식으로 junction의 전자농도를 계산하고, Poisson 방정식을 해석하여 potential profile에 의한 전자 농도가 heterostructure에서 self-consistent가 되도록 연산하였다. 끝으로 AlInAs/InP 구조에서 positively ionized donor, valance band에서의 hole, conduction band의 free electron과 구조내의 2DEG를 AlGaAs/GaAs 및 AlGaAs/InGaAs/GaAs와 비교하였다.

• Applied Science and Convergence Technology
• /
• 제23권6호
• /
• pp.387-391
• /
• 2014

Self-assembled InAlAs/AlGaAs quantum dots (QDs) on GaAs substrates were grown by using modified molecular epitaxy beam in Stranski-Krastanov method. In order to study the structural and optical properties of InAlAs/AlGaAs QDs, atomic force microscopy (AFM) and photoluminescence (PL) measurements are conducted. The size and uniformity of QDs have been observed from the AFM images. The average widths and heights of QDs are increased as the deposition time increases. The PL spectra of QDs are composed of two peaks. The PL spectra of QDs were analyzed by the excitation laser power- and temperature-dependent PL, in which two PL peaks are attributed to two predominant sizes of QDs.

• 한국진공학회지
• /
• 제2권1호
• /
• pp.34-40
• /
• 1993

새로운 단결정 박막 성장방법으로 최근에 많은 관심을 끌고 있는 초고진공 화학기상증착법(Ultra-High Vacuum Chemical Vapor Deposition)을 이용하여 AlGaAs에 에피탁시 박막을 성장시켰다. AlGaAs 에피탁시층의 성장은 2。 경사진 GaAs(100) 기판을 사용하였다. 반응 기체로는 Trimethylgallium(TMGa), Trimethylaluminum(TMAl)과 arsine을 사용하였고, 성장온도는 $580~700^{\circ}C$, 기체 압력은 10-5~10-4Torr를 유지하였다. 특히 본 연구에서는 arsine을 사전에 열분해 하는 통상의 Chemical Beam Epitaxy(CBE) 성장법과는 달리, arsine이 표면에서 분해되는 화학 반응만을 사용하여도 AlGaAs 에피탁시를 성장할 수 있음은 물론 박막내의 탄소 불순물의 농도가 크게 낮아짐을 관찰하였다. 또한 성장 온도의 변화에 따른 AlGaAs 에피탁시층의 Al 함유 과정에 대하여도 고찰하였다.

• 한국결정성장학회지
• /
• 제16권4호
• /
• pp.157-161
• /
• 2006

혼합소스 HVPE(hydride vapor phase epitaxy) 방법을 이용하여 InGaN 층을 GaN 층이 성장된 사파이어 (0001) 기판 위에 성장하였다. InGaN 층을 성장하기 위해 금속 In에 Ga을 혼합하여 III족 소스로 이용하였으며 V족 소스로는 $NH_3$를 이용하였다. InGaN층은 금속 In에 Ga을 혼합한 소스와 HCl을 흘려 반응한 In-Ga 염화물이 다시 $NH_3$와 반응하도록 하여 성장하였다. XPS 측정을 통해 혼합소스 HVPE 방법으로 성장한 층이 InGaN 층임을 확인할 수 있었다. 선택 성장된 InGaN 층의 In 조성비는 PL과 CL을 통해서 분석하였다. 그 결과 In 조성비는 약 3%로 평가되었다. 또한, 4원 화합물인 InAlGaN 층을 성장하기 위해 In 금속에 Ga과 Al을 혼합하여 III족 소스로 사용하였다. 본 논문에서는 혼합소스 HVPE 방법에 의해 III족 소스물질로 금속 In에 Ga(Al)을 혼합한 소스를 이용하여 In(Al)GaN층을 성장할 수 있음을 확인할 수 있었다.

• 한국진공학회지
• /
• 제20권5호
• /
• pp.345-355
• /
• 2011

GaAs나 InP 기반의 high electron mobility transistor (HEMT) 소자들은 우수한 마이크로파 및 밀리미터파 주파수 특성 및 이에 따른 우수한 저잡음 특성을 가지고 있다. GaAs 기판 위에 점진적으로 성장된 메타몰픽(Metamorphic) HEMTs (MHEMTs)는 InP 기판 위에 성정한 HEMT에 비해 비용 측면에서 커다란 장점을 가지고 있다. 본 논문에서는 이러한 MHEMT의 DC/RF 소신호 특성을 예측하기 위하여 InAlAs/InGaAs/GaAs MHEMT 소자들의 DC/RF 소신호 주파수 특성을 시뮬레이션하였다. 2차원 소자 시뮬레이터의 hydrodynamic 전송 모델을 사용하여 $In_{0.52}Al_{0.48}As/In_{0.53}Ga_{0.47}As$ 이종접합 구조를 갖는 제작된 0.1-${\mu}m$ ${\Gamma}$-게이트 MHEMT 소자에 대하여 파라미터 보정 작업을 수행한 후, MHEMT 소자들에 대해 DC 특성 및 RF 소신호 주파수 특성을 시뮬레이션하고 실험 데이터와 비교 분석하였다. 또한, 게이트 리세스 구조에 따른 MHEMT 소자들의 DC/RF 특성을 시뮬레이션하고 비교 분석하였다.