• Convergence Security Journal
• /
• v.10 no.2
• /
• pp.1-9
• /
• 2010

Snort is an open source network intrusion prevention and detection system (IDS/IPS) developed by Sourcefire. Combining the benefits of signature, protocol and anomaly-based inspection, Snort is the most widely deployed IDS/IPS technology worldwide. With millions of downloads and approximately 300,000 registered users. Snort identifies network indicators by inspecting network packets in transmission. A process on a host's machine usually generates these network indicators. This means whatever the snort signature matches the packet, that same signature must be in memory for some period (possibly micro seconds) of time. Finally, investigate some security issues that you should consider when running a Snort system. Paper coverage includes: How an IDS Works, Where Snort fits, Snort system requirements, Exploring Snort's features, Using Snort on your network, Snort and your network architecture, security considerations with snort under digital forensic windows environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4A
• /
• pp.390-398
• /
• 2004

This paper describes a study on the automatic generation system of the interface for communication among AMBA bus and IPs with different protocols. Employing an extended STG, the proposed system generates the interface modules required for the communication among IPs with different protocols. For an example system, the interface module for communication between AMBA AHB bus and a video decoder has been generated and verified in its functionality. The area and latency have been compared with the manually designed interface. For burst-mode communication, the generated interface module shows the comparable performance with the manually designed module. For single-mode communication, the generated interface module shows a slightly worse performance than the manually designed module. However, the increased area is negligible considering the size of the IP.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.65-72
• /
• 2013

This paper presents design methodology for Memristor-CMOS circuits and its application to primitive IPs design. We proposed a Memristor model and designed basic elements, Memristor AND/OR gates. The primitive IPs based on a Memristor-CMOS technology is proposed for a Memristive system design. The netlists of IPs are extracted from the layouts of Memristor-CMOS and is verified with SPICE-like Memristor model under $0.18{\mu}m$ CMOS technology. As a result, an example design Memristor-CMOS full adder has only 47.6 % of silicon area compare to the CMOS full-adder.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.47-49
• /
• 2022

IPS is an indoor positioning system that replaces GPS, which is less accurate due to walls and roofs inside buildings. Radio signals such as Wi-Fi are used instead of satellite signals, and complex methods are being used to increase accuracy. In this paper, we present a more efficient positioning method than before by applying high-level signals to high-accuracy fingerprint techniques. A radio map is configured with high-level signals collected by utilizing Wi-Fi APs, which are more than in the past. The suitability of use was confirmed by analyzing the pattern represented by the configured radio map for each location.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.287-289
• /
• 2015

Internet of Things(IoT) is promising futuristic technology and the relevant market is expected to grow explosively. So, many company develop the product or service that is applied IoT in various fields. The objective of this paper is design and development of collaboration system for enterprise based on beacon to improve efficiency in office environment. We construct Indoor Positioning System(IPS) that using by beacon and mobile device and then develop the related service that utilize IPS data. Thus, we expect that this study contribute to improving productivity of domestic company, is used widely to develop new IoT service that applying various sensors such as beacon, temperature, humidity and so on.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1766-1768
• /
• 2002

The current density in the IPS(Inverse Pinch Switch) is 1/62 times less than that in the spark gap. It was shown that in comparison with the spark gap, the switch inductance of the IPS is largely reduced and the useful lifetime is significantly increased. In the paper, the design technology of a closing switch, especially IPS triggered by electrical signal for pulsed power system with a very high voltage and current is presented.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.05a
• /
• pp.12-17
• /
• 2003

본 연구에서는 MICP Etching system 을 이용한 Via contact 및 Deep contact hole etch process 특성을 연구하였다. Langmuir probe 를 이용한 MICP source 의 Plasma density & electron temperature 측정하였고 탄소와 플로우르를 포함하는 혼합 Plasma 를 형성하여 RF frequency, wall temperature, chamber gap, gas chemistry 등의 변화에 따른 식각 특성을 조사하였다. Plasma density 는 1000w 에서 $10^{11}$/$cm^3$ 이상의 high density plasma와 uniform plasma 형성을 확인하였고 $CH_{2}F_{2}$와 CO의 적절한 혼합비를 이용하여 Oxide to PR 선택비가 10 이상인 고선택비 조건을 확보하였다. 고선택비 형성에 따라 Polymer 형성이 많이 되었고 이를 개선하기 위하여 반응 챔버의 온도 조절을 통하여 Polymer 증착 방지에 효과적인 것을 확인하였다. MICP source를 이용하여 탄소와 플로우르의 혼합 가스와 식각 챔버의 온도 조절에 의한 선택비 증가를 확보하여 High Aspect Ratio Contact Hole Etch 가능성을 확보하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10c
• /
• pp.634-636
• /
• 2002

인터넷과 내장형 시스템의 발전으로 인하여 가정내의 모든 정보가전들이 홈 네트워크를 통하여 인터넷과 연결되어 있고 원격에서 제어가 가능하다. 또한 휴대폰, PDA와 같은 무선단말기를 이용한 정보검색, 메일송수신, 증권거래, 은행거래와 같은 다양한 전자상거래가 활발히 진행되고 있다. 이와 반면에 이런 정보가 전이나 무선단말기에 대한 해킹 바이러스 사례가 갈수록 많아지고 있다. 본 논문에서는 내장형 시스템인 임베디드 리눅스에서 IPS(Intrusion Prevention System)를 설계하고 구현하여 이런 정보가전이나 무선단말기에 대한 보안 방안을 제시한다.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1197-1199
• /
• 2003

ROCSAT-2 mission is to daily image over Taiwan and the surrounding area for disaster monitoring, land use, and ocean surveillance during the 5-year mission lifetime. The satellite will be launched in December 2003 into its mission orbit, which is selected as a 14 rev/day repetitive Sun-synchronous orbit descending over (120 deg E, 24 deg N) and 9:45 a.m. over the equator with the minimum eccentricity. National Space Program Office (NSPO) is developing a ROCSAT-2 Image Processing System (IPS), which aims to provide real-time high quality image data for ROCSAT-2 mission. A simulated ROCSAT-2 image, based on Level 1B QuickBird Data, is generated for IPS verification. The test image is comprised of one panchromatic data and four multispectral data. The qualification process consists of four procedures: (a) QuickBird image processing, (b) generation of simulated ROCSAT-2 image in Generic Raw Level Data (GERALD) format, (c) ROCSAT-2 image processing, and (d) geometric error analysis. QuickBird standard photogrammetric parameters of a camera that models the imaging and optical system is used to calculate the latitude and longitude of each line and sample. The backward (inverse model) approach is applied to find the relationship between geodetic coordinate system (latitude, longitude) and image coordinate system (line, sample). The bilinear resampling method is used to generate the test image. Ground control points are used to evaluate the error for data processing. The data processing contains various coordinate system transformations using attitude quaternion and orbit elements. Through the qualification test process, it is verified that the IPS is capable of handling high-resolution image data with the accuracy of Level 2 processing within 500 m.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.4 s.77
• /
• pp.449-457
• /
• 2005

A multi-noded cable element allowing sliding at its nodes without frictions was introduced in this paper, and its elastic stiffness matrix was derived. A two-node truss element was briefly summarized and extended to multi-node, cable-truss elements that keep their tension constant but are connected without frictions through several nodes. The element elastic stiffness matrix of the multi-node,cable-truss elements was consistently derived. The steel wales pre-stressed externally in the IPS system were chosen as numerical examples and analyzed under various loading conditions. The cable tensions calculated using the present element were compared with the results of the flexibility method and those using the two-node truss element, respectively.