• Elastomers and Composites
• /
• v.47 no.1
• /
• pp.9-17
• /
• 2012

Herein, life time prediction based on the deterioration of physical properties of chloroprene rubber (CR)aged by heat and seawater was performed. CR samples were experienced an accelerated test at $80^{\circ}C$, $100^{\circ}C$, $120^{\circ}C$ for heat aging, and $40^{\circ}C$, $60^{\circ}C$, $80^{\circ}C$ for seawater aging for 20,000 hrs. The change in tensile strength, maximum elongation,hardness was measured. As a result, the decrease in elongation was a major factor causing failure. The life time estimated using an Arrhenius model was 125 years at $23^{\circ}C$ for thermal aging and 9 years at $23^{\circ}C$ for seawater aging. SEM and elemental analysis reveal that cracks were generated and the content of oxygen was increased for CR agined by seawater. FT-IR spectrum shows the new C-O and C = O bonds were generated by the chemical reaction with seawater. Also, the glass transtion temperature was increased and the thermal decomposition was decreased by seawater aging.

• Korean Journal of Food Science and Technology
• /
• v.41 no.3
• /
• pp.339-344
• /
• 2009

Concentrations of polycyclic aromatic hydrocarbon (PAH) in processed chestnut products were determined by HPLC/FLD. The methodology involved procedures of sonication with water, extraction with hexane, and clean-up on a Sep-pak florisil cartridge. The PAH limits of detection (LOD) and limits of quantitation (LOQ) ranged from 0.012 to 0.382 ${mu}g/kg$ and from 0.042 to 1.273 ${mu}g/kg$, respectively. The coefficients of variation for intra- and inter-day assays were 0.02-4.48% and 0.37-9.83%, respectively, and the accuracies were 81.95-125.44% and 79.89-116.53%, respectively. The overall recoveries for eight PAHs spiked into the processed chestnut products ranged from 87.83 to 100.56%. As a result, PAH contents were not detected in the processed chestnut products.

• Health Policy and Management
• /
• v.26 no.4
• /
• pp.359-372
• /
• 2016

Background: The purpose of this study was to develop risk-adjustment models for acute stroke mortality that were based on data from Health Insurance Review and Assessment Service (HIRA) dataset and to evaluate the validity of these models for comparing hospital performance. Methods: We identified prognostic factors of acute stroke mortality through literature review. On the basis of the avaliable data, the following factors was included in risk adjustment models: age, sex, stroke subtype, stroke severity, and comorbid conditions. Survey data in 2014 was used for development and 2012 dataset was analysed for validation. Prediction models of acute stroke mortality by stroke type were developed using logistic regression. Model performance was evaluated using C-statistics, $R^2$ values, and Hosmer-Lemeshow goodness-of-fit statistics. Results: We excluded some of the clinical factors such as mental status, vital sign, and lab finding from risk adjustment model because there is no avaliable data. The ischemic stroke model with age, sex, and stroke severity (categorical) showed good performance (C-statistic=0.881, Hosmer-Lemeshow test p=0.371). The hemorrhagic stroke model with age, sex, stroke subtype, and stroke severity (categorical) also showed good performance (C-statistic=0.867, Hosmer-Lemeshow test p=0.850). Conclusion: Among risk adjustment models we recommend the model including age, sex, stroke severity, and stroke subtype for HIRA assessment. However, this model may be inappropriate for comparing hospital performance due to several methodological weaknesses such as lack of clinical information, variations across hospitals in the coding of comorbidities, inability to discriminate between comorbidity and complication, missing of stroke severity, and small case number of hospitals. Therefore, further studies are needed to enhance the validity of the risk adjustment model of acute stroke mortality.

• Korean Chemical Engineering Research
• /
• v.40 no.6
• /
• pp.669-675
• /
• 2002

The alkenylation of o-xylene with 1,3-butadiene to make OTP(ortho-tolyl Pentene) was carried out over liquid phase NaK alloy, Na metal and the metallic sodium dispersed on the specific support such as NaX and $Al_2O_3$. Liquid phase NaK alloy showed the improved conversion and selectivity when they were pretreated by ultrasound to increase the dispersion. For the case of metallic sodium, the induction period for the formation of homogeneous metal sodium solution with high dispersion was needed before the reaction. In the case of metallic sodium dispersed on support, more than 80 % conversion could be obtained without induction period regardless of supports used. But 85 % of the metallic sodium was resolved into the reaction mixture after reaction for 7 hours. The amount of byproducts, oligomers, produced from OTP and 1,3-butadiene increased with the amount of 1,3-butadiene introduced and the selectivity to OTP was in inversely proportional to the conversion.

• Korean Journal of Food Science and Technology
• /
• v.33 no.1
• /
• pp.1-6
• /
• 2001

Emulsion products with water soluble protein were exposed under light at $5^{\circ}C$ for 8 days. Peroxide value (POV) was increased significantly at the bigining of storage and 2-thiobarbituric acid (TBA) value also increased until 4 days of storage with increase of the production of carbonyl compounds, suggesting that the condition was reacted different from that of the lipid autoxidation. The reaction was similar to the flavor reversion that usually produced from the bigining of soybean oil oxidation. The reason might be the meat pigment, myoglobin, oxidation and it would be due to the singlet oxygen rather than superoxide anion. When the light was excluded general pattern was similar but the production of oxidation products were smaller than that when the sample was exposed under light. The effect of the singlet oxygen was also smaller which meant that the singlet oxygen produced during emulsion process may affect on the flavor reversion at the bigining of storage. The POV of the emulsion without water soluble protein increase gradually by storage and the results indicated that the degradation rate of the peroxides were lower than the sample with water soluble protein. Especially after 4 days of storage, production of carbonyl compounds were decreased. During storage it would be possible to produce the singlet oxygen and the sensitizer from the plants that can be produced during decoloration of soybean oil may be responsible for it. When the light was excluded the production of oxidation products were reduced at the begining of storage and the effect of quencher also was not detected. Therefore the results indicated that the light can accelerate the lipid oxidation.

• Korean journal of applied entomology
• /
• v.53 no.1
• /
• pp.27-34
• /
• 2014

Entomopathogenic fungi were isolated from Bemisia tabaci in an Oriental melon field, and their growth characteristics, factors related to a natural outbreak, and infectivity against Bemisia tabaci, Tetranychus urticae, and Frankliniella intonsa were investigated. The isolates had erect conidiophores bearing whorls of 4-6 phialides with a swollen base where cylindrical conidia of $3.0-3.4{\mu}m$ were attached. The isolates were identified as Isaria fumosorosea on the basis of morphological characteristics and an ITS sequence with 99% similarity. I. fumosorosea IFs-08 grew well on Sabouraud dextrose agar+yeast extract medium(3.2 mm/day/$24^{\circ}C$); it grew better at $35^{\circ}C$ than at $15^{\circ}C$. The isolates of I. fumosorosea-IFs were highly infective and killed 93.9-96.7% B. tabaci, 84.9-92.0% T. urticae, and 81.5-84.4% F. intonsa in bioassay, whereas three isolates (Isaria tenuipes, Isaria farinosa, and Isaria fumosorosea) from KACC showed a low infectivity of 10-20%. To the best of our knowledge, this is the first report of I. fumosorosea isolated from B. tabaci in Korea.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.6
• /
• pp.25-34
• /
• 2012

New calibration method for the near-field scanning (NFS) system is presented. The proposed calibration method consisted of a new near-field antenna (NFP) and newly devised patterns as circular patch patterns (CPPs) and meander patterns (MPs). The proposed patterns were used for improving spatial resolutions and simplifying a calibration procedure of the NFP compared to the conventional method defined in the IEC61967-3 and 6. Also, the effect of the length of NFPs on attenuation characteristics was investigated with length of 8mm and 30mm. For them, we designed and fabricated CPPs of diameter (D) = 20, 40, 60, and 100mm and MPs of various widths and spaces. We found the reverse relations between spatial resolutions and heights of measuring points by using simplified calibration procedure. The testing result shows that the spatial resolution of $120{\mu}m$ at height of $200{\mu}m$ was verified without complex correlation algorithms under 8GHz. For manufacturing cost all patterns and the NFP were realized with low-cost fabrication using PCB (FR-4) not by a conventional LTCC process. For verification of chip-level EMC from the results, near-field scanning system (NFSS) having step resolution of Sub-micron scale was produced and by using the proposed NFSS and proposed NFP measurement of chip shows accurately the shape of the resolution of $200{\mu}m$ patterns for securing a high level of chip-level EMC verification.

• Journal of Periodontal and Implant Science
• /
• v.38 no.2
• /
• pp.143-152
• /
• 2008

Purpose: Specific bacteria are believed to play an important role in chronic periodontitis. Although extensive microbial analyses have been performed from subgingival plaque samples of periodontitis patients, systemic analysis of subingival microbiota has not been carried out in a Korean population so far. The purpose of this study was to investigate the prevalence of 29 putative periodontal pathogens in Korean chronic periodontitis patients and evaluate which pathogens are more associated with Korean chronic periodontitis. Material and Methods: A total of 86 subgingival plaque samples were taken from 15 chronic periodontits(CP) patients and 13 periodontally healthy subjects in Korea. CP samples were obtained from the deepest periodontal pocket (>3 mm probing depth[PD]) and the most shallow periodontal probing site ($\leq$3 mm PD) in anterior tooth and posterior tooth, respectively, of each patient. Samples in healthy subjects were obtained from 1 anterior tooth and 1 posterior tooth. Polymerase chain reaction (PCR) of 16S ribosomal DNA (rDNA) of subgingival plaque bacteria was performed. Detection frequencies(% prevalence) of 29 putative periodontal pathogens were investigated as bacterium-positive sites/total sites. Results: With the exception of Olsenella profuse and Prevotella nigrescens, the sites of diseased patients generally showed higher prevalence than the healthy sites of healthy subjects for all bacteria analyzed. Tanerella forsythensis (B.forsythus), Campylobacter rectus, Filifactor alocis, Fusobacterium nucleatum, Porphyromonas endodontalis and Porphyromonas gingivalis were detected in more than 80% of sites with deep probing depths in CP patients. In comparison between the sites (deep or shallow PD) of CP patients and the healthy sites of healthy subjects, there was statistically significant difference(P<0.05) of prevalence in T.forsythensis (B.forsythus), C.rectus, Dialister invisus, F.alocis, P.gingivalis and Treponema denticola. Conclusion: Our results demonstrate that the four putative periodontal pathogens, T.forsythensis (B.forsythus), C.rectus, P.gingivalis and F.alocis are closely related with CP patients in the Korean population.

• Archives of Pharmacal Research
• /
• v.21 no.5
• /
• pp.581-590
• /
• 1998

We developed a novel water-soluble camptothecin analobue, CKD602, and evaluated the inhibition of topoisomerase I and the antitumor activities against mammalian tumor cells and human tumor xenografts. CKD602 was a nanomolar inhibitor of the topoisomerase I enzyme in the cleavable complex assay. CKD602 was found to be 3 times and slightly more potent than topotecan and camptothecin as inhibitors of topoisomerase, respecitively. In tumor cell cytotoxicity, CKD602 was more potent than topotecan in 14 out of 26 human cancer cell lines tested, while it was comparable to camptothecin. CKD602 was tested for the in vivo antitumor activity against the human tumor xenograft models. CKD602 was able to imduce regression of established HT-29, WIDR and CX-1 colon tumors, LX-1 lung tumor, MX-1 breast tumor and SKOV-3 ovarian tumor as much as 80, 94, 76, 67, 87% and 88%, respectively, with comparable body weight changes to those of topotecan. Also the therapeutic margin (R/Emax: maximum tolerance dose/$ED-{58}$) of CKD602 was significantly higher than that of topotecan by 4 times. Efficacy was determined at the maximal tolerated dose levels using schedule dependent i.p. administration in mice bearing L1210 leukemia. On a Q4dx4 (every 4 day for 4 doses) schedule, the maximum tolerated dose (MTD) was 25 mg/kg per administration, which caused great weight loss and lethality in <5% tumor bearing mouse. this schedule brought significant increase in life span (ILS), 212%, with 33% of long-term survivals. The ex vivo antitumor activity of CKD602 was compared with that of topotecan and the mean antitumor index (ATI) values recorded for CKD602 were significantly higher than that noted for topotecan. From these results, CKD602 warrants further clinical investigations as a potent inhibitor of topoisomerase I.

• Korean Journal of Food Science and Technology
• /
• v.37 no.4
• /
• pp.611-617
• /
• 2005

Dispersed repetitive DNA elements in genomes of microorganisms differ among and within species. Because distances between repetitive sequences vary depending on bacterial strains, genomic fingerprinting with interspersed repetitive sequence-based probes can be used to distinguish unrelated organisms. Among well-known bacterial repetitive sequences, Repetitive Extragenic Palindromic (REP) sequence has been used to identify environmental bacterial species and strains. We applied REP-PCR to detect and differentiate four major Gram-negative food-borne bacterial pathogens, E. coli, Salmonella, Shigella, and Vibrio. Target DNA fragments of these pathogens were amplified by REP-PCR method. PCR-generated DNA fragments were separated on 1.5% agarose gel. Dendrograms for PCR products of each strain were constructed using photo-documentation system. REP-PCR reactions with primer pairs REP1R-I and REP2-I revealed distinct REP-PCR-derived genomic fingerprinting patterns from E. coli, Salmonella, Shigella, and Vibrio. REP-PCR method provided clear distinctions among different bacterial species containing REP-repetitive elements and can be widely used for typing food-borne Gram-negative strains. Results showed established REP-PCR reaction conditions and generated dendrograms could be used with other supplementary genotyping or phenotyping methods to identify isolates from outbreak and to estimate relative degrees of genetic similarities among isolates from different outbreaks to determine whether they are clonally related.