• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.6
• /
• pp.473-479
• /
• 2011

In this paper, we have compared amorphous InGaZnO (a-IGZO) thin-film transistor (TFT) with the nano-crystalline embedded-IGZO ($N_c$-embedded-IGZO) TFT fabricated by solid-phase crystallization (SPC) technique. The field effect mobility (${\mu}_{FE}$) of $N_c$-embedded-IGZO TFT was 2.37 $cm^2/Vs$ and the subthreshold slope (S-factor) was 0.83 V/decade, which showed lower performance than those of a-IGZO TFT (${\mu}_{FE}$ of a-IGZO was 9.67 $cm^2/Vs$ and S-factor was 0.19 V/decade). This results originated from generation of oxygen vacancies in oxide semiconductor and interface between gate insulator and semiconductor due to high temperature annealing process. However, the threshold voltage shift (${\Delta}V_{TH}$) of $N_c$-embedded-IGZO TFT was 0.5 V, which showed 1 V less shift than that of a-IGZO TFT under constant current stress during $10^5$ s. This was because there were additionally less increase of interface trap charges in Nc-embedded-IGZO TFT than a-IGZO TFT.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.137-137
• /
• 2009

Indium Gallium Zinc Oxide (IGZO) thin films for TFT channel were prepared by using a Facing Target Sputtering (FTS) system. To investigate the effect of oxygen on the optical and the electrical properties of amorphous InGaZnO(a-IGZO), we prepared thin films by FTS system in various oxygen atmospheres at room temperature. As-deposited IZTO thin films were investigated by using a UV/VIS spectrometer, an X-ray diffractometer, a Hall Effect measurement system, and an atomic force microscope. The quantitative analysis of the films was carried out by using the energy dispersive X-ray (EDX) technique for the as-deposited film.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.7
• /
• pp.521-524
• /
• 2012

We report on variations of electrical properties with different active layer thickness and post-annealing temperature in amorphous In-Ga-Zn-O (IGZO) thin-film transistors (TFTs). In particular, subthreshold swing (SS) of the IGZO-TFTs was improved as increasing the active layer thickness at an given post-annealing temperature, accompanying the negative shift in turn-off voltage. However, as increasing post-annealing temperature, only turn-off voltage was shifted negatively with almost constant SS value. The effect of the active layer thickness and post-annealing temperature on electrical properties, such as SS, field effect mobility and turn-off voltage in IGZO-TFTs has been explained in terms of the variation of trap density in IGZO channel layer and at gate dielectric/IGZO interface.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.364-364
• /
• 2012

평판 디스플레이 분야에 투명 비정질 산화물 반도체는 박막 트렌지스터(Thin film transistor; TFT)소자의 채널층으로 사용할 수 있다. 투명 비정질 산화물 반도체 IGZO (In-Ga-Zn-O)는 다른 비정질 재료에 비해 높은 전하 이동도를 가지기 때문에 우수한 성능의 TFT소자를 제작할 수 있다. 본 연구에서는 RF magnetron sputtering법으로 corning 1737 유리기판 위에 RF 파워의 변화에 따라 증착한 IGZO박막의 광학적 전기적 특성 변화를 연구하였다. 박막 증착 조건은 초기 압력 $2.0{\times}10^{-6}Torr$, 증착 압력 $2.0{\times}10^{-2}Torr$, 반응가스 Ar 25 sccm, 증착 온도는 실온으로 고정하였으며, 공정변수로 RF 파워를 25 w, 50 w, 75 w, 100 w로 변화시키며, IGZO 타겟은 $In_2O_3$, $Ga_2O_3$, ZnO 분말을 각각 1 : 1 : 2mol% 조성비로 혼합하여 소결한 타겟을 사용하였다. 표면분석(AFM)결과 RF 파워가 증가함에 따라 거칠기가 증가하였으며, XRD 분석결과 Bragg's 법칙을 만족하는 피크가 나타나지 않는 비정질 구조임을 확인할 수 있었다. 가시광 영역에서 (450~700 nm) 25 w일 때 85% 이상을 확인하였고, RF 파워가 증가할수록 밴드갭이 감소하는 것을 확인하였다. RF 파워가 100 w인 경우 carrier 밀도는 $7.7{\times}10^{19}cm^{-3}$, Mobility $8.42cm^2V-s$, Resistivity $9.45{\times}10^{-3}{\Omega}-cm$로 투명 전도막의 특성을 보였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.2
• /
• pp.120-124
• /
• 2016

In this study, we fabricate transparent and bendable a-IGZO (amorphous indium gallium zinc oxide) TFTs (thin-film transistors) with a-IZO (amorphous indium zinc oxide) transparent electrodes on plastic substrates and investigate their electrical characteristics under bending states. Our a-IGZO TFTs show a high transmittance of 82% at a wavelength of 550 nm. And these TFTs have an $I_{on}/I_{off}$ ratio of $1.8{\times}10^8$, a field effect mobility of $15.4cm^2/V{\cdot}s$, and a subthreshold swing of 186 mV/dec. The good electrical characteristics are retained even after bending with a curvature radius of 18 mm corresponding to a strain of 0.5% owing to mechanical durability of the transparent electrodes used in this study.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.4
• /
• pp.235-237
• /
• 2016

Oxide/metal/oxide (OMO) thin films were fabricated using amorphous indium-gallium-zinc-oxide (a-IGZO) and an Ag metal layer on a glass substrate at room temperature. The optical and electrical properties of the a-IGZO/Ag/a-IGZO samples changed systemically depending on the thickness of the Ag layer. The transmittance in the visible range tends to decrease as the Ag thickness increases while the resistivity, carrier concentration, and Hall mobility tend to improve. The a-IGZO/Ag (13 nm)/a-IGZO thin film with the optimum Ag thickness showed an average transmittance (T_av) of 71.7%, resistivity of 6.63 × 10⁻⁵ Ω·cm and Hall mobility of 15.22 cm²V⁻¹s⁻¹.

• Electronic Materials Letters
• /
• v.14 no.6
• /
• pp.749-754
• /
• 2018

Previous studies have reported on the mechanical robustness and chemical stability of flexible amorphous indium gallium zinc oxide (a-IGZO) thin-film transistors (TFTs) on plastic substrates both in flat and curved states. In this study, we investigate how the polyimide (PI) substrate affects hydrogen concentration in the a-IGZO layer, which subsequently influences the device performance and stability under bias-temperature-stress. Hydrogen increases the carrier concentration in the active layer, but it also electrically deactivates intrinsic defects depending on its concentration. The influence of hydrogen varies between the TFTs fabricated on a glass substrate to those on a PI substrate. Hydrogen concentration is 5% lower in devices on a PI substrate after annealing, which increases the hysteresis characteristics from 0.22 to 0.55 V and also the threshold voltage shift under positive bias temperature stress by 2 ${\times}$ compared to the devices on a glass substrate. Hence, the analysis and control of hydrogen flux is crucial to maintaining good device performance and stability of a-IGZO TFTs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.340.2-340.2
• /
• 2014

최근 비정질 산화물 반도체는 가시광 영역에서의 투명도와 낮은 공정 온도, 그리고 높은 Field-effect mobility로 인해 Thin film transistors의 Active channel layer의 재료로 각광 받고 있다. ZnO, IZO, IGO, ITGO등의 많은 산화물 반도체들이 TFT의 채널층으로의 적용을 위해 활발히 연구되고 있으며, 특히 비정질 IGZO는 비정질임에도 불구하고 Mobility가 $10cm^2/Vs$ 정도로 기존의 a-Si:H 보다 높은 Mobility 특성을 나타내고 있어 대화면 디스플레이와 고속 구동을 위한 LCD에 적용 할 수 있으며 또한 낮은 공정 온도로 인해 플렉서블 디스플레이에 응용될 수 있다는 장점이 있다. 우리는 RF magnetron sputtering법으로 증착한 비정질 IGZO TFT(Thin Film Transistors)의 전기적 특성과 IGZO 박막의 특성에 미치는 RF power의 영향을 연구하였다. 제작한 TFTs의 Active channel layer는 산소분압 1%, Room temperature에서 RF power별(50~150 W)로 Si wafer 기판 위에 30nm로 증착 하였고 100 nm의 $SiO_2$가 절연체로 사용되었다. 또한 박막 특성을 분석하기 위해 같은 Chamber 분위기에서 100 nm로 IGZO 박막을 증착하였다. 비정질 IGZO 박막의 X-ray reflectivity(XRR)을 분석한 결과 RF Power가 50 W에서 150 W로 증가 할수록 박막의 Roughness는 22.7 (${\AA}$)에서 6.5 (${\AA}$)로 감소하고 Density는 5.9 ($g/cm^3$)에서 6.1 ($g/cm^3$)까지 증가하는 경향을 보였다. 또한 제작한 IGZO TFTs는 증착 RF Power가 증가함에 따라 Threshold voltage (VTH)가 0.3~4(V)로 증가하는 경향을 나타내고 Filed-effect mobility도 6.2~19 ($cm^2/Vs$)까지 증가하는 경향을 보인다. 또한 on/off ratio는 모두 > $10^6$의 값을 나타내며 subthreshold slope (SS)는 0.3~0.8 (V/decade)의 값을 나타낸다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.425-425
• /
• 2008

The transparent conducting oxides(TCOs) are widely used as electrodes for most flat panel display devices(FPDs), electrodes in solar cells and organic light emitting diodes(OLED). Among them, indium oxide materials are mostly used due to its high electrical conductivity and a high transmittance in the visible spectrum. The present study reports on a study of the electrical and optical properties of IGZO thin films prepared on glass and PET substrates by the combinational magnetron sputtering. We use the targets of IZO and Ga2O3 for the deposition process. In some case the deposition process is coupled with the End-Hall ion-beam treatment onto the substrates before the sputtering. In addition we control the deposition rate to optimize the film quality and to minimize the surface roughness. Then we investigate the effects of the Ar gas pressure and RF power during the sputtering process upon the electrical, optical and morphological properties of thin films. The properties of prepared IGZO thin films have been analyzed by using the XRD, AFM, a-step, 4-point probe, and UV spectrophotometer.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1334_1335
• /
• 2009

In this paper we have presented recent studies concerning the high performance oxide thin film transistor (TFT) with a-IGZO channel and $ZrO_2$ gate dielectrics. The a-IGZO TFT is fully fabricated at room-temperature without any thermal treatments. The $ZrO_2$ is one of the most promising high-k materials with high capacitance originated from the high dielectric constant. The a-IGZO TFT with $ZrO_2$ shows high performance exhibiting high field effect mobility of $39.82\;cm^2$/Vs and high on-current of 2.52 mA at 10V.