• Journal of the Optical Society of Korea
• /
• v.12 no.4
• /
• pp.221-225
• /
• 2008

We propose a simple hydrogen detection scheme based on a Mach-Zehnder interferometer formed with a pair of palladium-coated long-period fiber gratings (LPGs). Since an LPG pair offered a fine-structured interference fringe in its transmission spectrum, the resolution as a sensor could be appreciably enhanced compared to that of a single LPG. As the palladium layer absorbed hydrogen, the effective refractive indices of the cladding modes were increased so that the interference spectrum was blue-shifted up to 2.3 nm with a wavelength sensitivity of -0.29 nm/min for 4% of hydrogen concentration.

• Transactions of the Korean hydrogen and new energy society
• /
• v.34 no.2
• /
• pp.113-121
• /
• 2023

Recently, low hydrogen carbon production technology is drawing interest due to lower production costs. Although the pace of research in this field has been accelerating, there is no well-established criteria for evaluation. The most of current evaluation methods needs information related to technology. However the technology is not enough to provide effective evaluation criteria because the technology is not fully developed. In this study, we propose an integrated Delphi-analytic hierarchy process (AHP) method and low carbon hydrogen production technology evaluation model. Experts opinion is used to provide evaluation criteria for the technology. In this study, integrated Delphi-AHP method are utilized for determining factors and calculating their numerical importance based on experts opinion. Then, sensitivity analysis is performed to verify the robustness of the analysis and scenarios of potential changes. As many as 11 factors are identified by Delphi method. Then, numerical importance of the factors are calculated by AHP. Sensitivity analysis is performed. It shows that intellectual property right (IPR) is always more important than other factors. This study proposes the numerical standard for the low carbon hydrogen production technology evaluation. The proposed model can be used for technology evaluation or commercialization.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.6
• /
• pp.550-557
• /
• 2013

A glucose hydrothermal method is described for preparing hollow carbon spheres (HCS), which have a regular morphology and a high Brunauer-Emmett-Teller surface area of 28.6 m2/g. Scanning electron microscopy shows that they have thin shells and diameter between 2 and 8 ${\mu}m$. The HCSs were modified for the enhanced room temperature hydrogen storage by employing Ni nanoparticles on their surface. The Ni-decorated HCSs were characterized by X-ray diffraction, transmission electron microscopy coupled with an energy dispersive spectroscope, and an inductively coupled plasma spectrometer, indicating that fine and well-distributed Ni nanoparticles can be accomplished on the HCSs. The hydrogen uptake capacity in HCSs with and without Ni loading was evaluated using a high-pressure microbalance at room temperature under a hydrogen pressure upto 9 MPa. As much as 1.23wt.% of hydrogen can be stored when uniformly distributed Ni nanoparticles are formed on the HCSs, while the hydrogen uptake capacity of as-received HCSs was 0.41 wt.%. For Ni nanoparticle-loaded HCSs, hydrogen molecules could be easily dissociated into atomic hydrogen and then chemically adsorbed by the sorbents, leading to an enhanced capacity for storing hydrogen.

• Nuclear Engineering and Technology
• /
• v.39 no.1
• /
• pp.1-8
• /
• 2007

Hydrogen and electricity are expected to dominate the world energy system in the long term. The world currently consumes about 50 million metric tons of hydrogen per year, with the bulk of it being consumed by the chemical and refining industries. The demand for hydrogen is expected to increase, especially if the U.S. and other countries shift their energy usage towards a hydrogen economy, with hydrogen consumed as an energy commodity by the transportation, residential and commercial sectors. However, there is strong motivation to not use fossil fuels in the future as a feedstock for hydrogen production, because the greenhouse gas carbon dioxide is a byproduct and fossil fuel prices are expected to increase significantly. An advanced reactor technology receiving considerable international interest for both electricity and hydrogen production, is the modular helium reactor (MHR), which is a passively safe concept that has evolved from earlier high-temperature gas-cooled reactor (HTGR) designs. For hydrogen production, this concept is referred to as the H2-MHR. Two different hydrogen production technologies are being investigated for the H2-MHR; an advanced sulfur-iodine (SI) thermochemical water splitting process and high-temperature electrolysis (HTE). This paper describes pre-conceptual design descriptions and economic evaluations of full-scale, nth-of-a-kind SI-Based and HTE-Based H2-MHR plants. Hydrogen production costs for both types of plants are estimated to be approximately $2 per kilogram.

• Journal of the Korean Ceramic Society
• /
• v.42 no.9 s.280
• /
• pp.618-623
• /
• 2005

HTGR (High Temperature Gas-Cooled Reactor) is highlighted to next generation power plant for producing the clean hydrogen gas. In this study, the spherical $UO_2$ kernel via $UO_3$ gel particles was prepared by the sol-gel process. Raw material of slightly Acid Deficient Uranyl Nitrate (ADUN) solution, which has pH = 1.10 and $[NO_3]/[U]$ mole ratio = 1.93, was obtained from dissolution of $U_3O_8$ powder with conc.-$HNO_3$. The surface of these spherical $UO_3$ gel particles, which was prepared from the broth solution, consisted of 1 M-uranium, 1 M-HMTA, and urea, were covered with the fine crystallite aggregates, and these particles were so hard that crushed well. But the other $UO_3$ gel particles prepared with the broth solution, consisted of 2 M-uranium, 2 M-HMTA, and urea, have soft surface characteristics and an amorphous phase. This type of $UO_3$ gel particles is some chance of doing possibility of high density from the compaction. The amorphous $UO_3$ gel particles was converted to $U_3O_8$ and then $UO_2$ by calcination at $600^{\circ}C\;in\;4\%\;-\;H_2\;+\;N2$ atmosphere.

• Corrosion Science and Technology
• /
• v.21 no.6
• /
• pp.466-475
• /
• 2022

Surface oxides and intergranular (IG) oxidation phenomena in Alloy 600 depending on hydrogen concentration were characterized to obtain clear insight into the primary water stress corrosion cracking (PWSCC) behavior upon exposure to pressurized water reactor primary water. When hydrogen concentration was between 5 and 30 cm³ H₂/kg H₂O, NiFe₂O₄ and NiO type oxides were found on the surface. NiO type oxides were found inside the oxidized grain boundary when hydrogen concentration was 5 cm³ H₂/kg H₂O. However, only NiFe₂O₄ spinel on the surface and Ni enrichment were observed when hydrogen concentration was 30 cm³ H₂/kg H₂O. These results indicate that the oxidation/reduction reaction of Ni in Alloy 600 depending on hydrogen concentration can considerably affect surface oxidation behavior. It appears that the formation of NiO type oxides in a Ni oxidation state and Ni enrichment in a Ni reduction (or metallic) state are common in primary water. It is believed that the above different oxidation/reduction reactions of Ni in Alloy 600 depending on hydrogen concentration can also significantly affect the resistance to PWSCC of Alloy 600.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.2
• /
• pp.160-166
• /
• 2015

On board hydrogen generation from the hydrolysis of an active metal is very attractive due to its economical, convenient, and safe reasons. A Mg-graphite pellet has been designed as a hydrogen source for portable fuel cell. Mg (1 g) + 0.10 g graphite pellet showed an excellent hydrogen generation rate that is equivalent to 15.8 ml/g.min from its hydrolysis. The hydrogen generation rate of the pellet is significantly increased due to the galvanic corrosion by galvanic cells between Mg anode and graphite cathode in a 10.wt. % NaCl solution at a room temperature.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.5
• /
• pp.510-516
• /
• 2016

This study examines the effects of linear alkylbenzene sulfonate on hydrogen fermentation of food waste. The hydrogen production rate was similar with different linear alkylbenzen sulfonate (LAS) concentrations. The maximum hydrogen yield increased with increasing LAS concentration. The highest maximum hydrogen yield was $0.550{\pm}0.005mol$ H2/mol hexose at LAS for 5.52 mg/L. But the maximum hydrogen yield decreased above LAS for 11.05 mg/L. The concentration of acetate in control reactor was increased, but it decreased with increasing LAS concentration in other reactors.

• Corrosion Science and Technology
• /
• v.4 no.6
• /
• pp.236-241
• /
• 2005

Hydrogen induced cracking (HIC) is one of the hydrogen degradation phenomena of linepipe steels caused by $H_2S$ gas in the crude oil or natural gas. However, NACE TM0284-96 standard HIC test method is hard to satisfy the steel requirements for sour service application since it uses more severe environmental conditions than actual conditions. Therefore, in order to use steels effectively, it is required to evaluate HIC resistance of steels in the practical range of environmental severity. In this study, HIC resistance of two high strength low alloy (HSLA) steels being used as line pipe steels was evaluated in various test solutions with different $H_2S$ pressures and pH values. The results showed that the key parameter affecting crack area ratio (CAR) is $H_2S$ partial pressure of test solution when the pH value of test solution is not over 4. Hydrogen diffusivity was not a constant value, but it was rather affected by the hydrogen ion concentration (pH value) in the solution.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.3
• /
• pp.7-11
• /
• 2019

We have investigated the effect of the hydrogen flow rate on the characteristics of IZO thin films for the TCO (transparent conducting oxide). For this purpose, IZO thin films are deposited by RF magnetron sputtering at 300℃ with various H₂ flow rate. To investigate the influences of the ambient gases, the flow rate of hydrogen in argon was varied from 0.1 sccm to 1 sccm. The IZO thin films deposited at 300℃ show crystalline structure having an (222) preferential orientation. The electrical resistivity of the crystalline-IZO films deposited at 300℃ and hydrogen gas of 0.8sccm was 3.192×10^-4Ω cm, the lowest value. As the hydrogen gas flow rate increased, the resistivity tended to decrease. The XPS profiles showed that the number of oxygen vacancy decreased as the hydrogen flow rate increased. The transmittance of the IZO films deposited at 300℃ were showed more than 80%.