Browse > Article
http://dx.doi.org/10.14773/cst.2022.21.6.466

Effect of Hydrogen Concentration on Surface Oxidation Behavior of Alloy 600 in Simulated Primary Water of Pressurized Water Reactor  

Yun Soo, Lim (Materials Safety Technology Development Division, Korea Atomic Energy Research Institute)
Dong Jin, Kim (Materials Safety Technology Development Division, Korea Atomic Energy Research Institute)
Sung Woo, Kim (Materials Safety Technology Development Division, Korea Atomic Energy Research Institute)
Seong Sik, Hwang (Materials Safety Technology Development Division, Korea Atomic Energy Research Institute)
Hong Pyo, Kim (Materials Safety Technology Development Division, Korea Atomic Energy Research Institute)
Sung Hwan, Cho (Materials Safety Technology Development Division, Korea Atomic Energy Research Institute)
Publication Information
Corrosion Science and Technology / v.21, no.6, 2022 , pp. 466-475 More about this Journal
Abstract
Surface oxides and intergranular (IG) oxidation phenomena in Alloy 600 depending on hydrogen concentration were characterized to obtain clear insight into the primary water stress corrosion cracking (PWSCC) behavior upon exposure to pressurized water reactor primary water. When hydrogen concentration was between 5 and 30 cm3 H2/kg H2O, NiFe2O4 and NiO type oxides were found on the surface. NiO type oxides were found inside the oxidized grain boundary when hydrogen concentration was 5 cm3 H2/kg H2O. However, only NiFe2O4 spinel on the surface and Ni enrichment were observed when hydrogen concentration was 30 cm3 H2/kg H2O. These results indicate that the oxidation/reduction reaction of Ni in Alloy 600 depending on hydrogen concentration can considerably affect surface oxidation behavior. It appears that the formation of NiO type oxides in a Ni oxidation state and Ni enrichment in a Ni reduction (or metallic) state are common in primary water. It is believed that the above different oxidation/reduction reactions of Ni in Alloy 600 depending on hydrogen concentration can also significantly affect the resistance to PWSCC of Alloy 600.
Keywords
Alloy 600; Surface oxidation; Hydrogen concentration; Primary water; TEM/EDS;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 W. Bamford and J. Hall, Proc. 11th Int. Conf. on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactor, pp. 1071 - 1079, American Nuclear Society (2003). 
2 Y.S. Lim, H.P. Kim and S.S. Hwang, Microstructural characterization on intergranular stress corrosion cracking of Alloy 600 in PWR primary water environment Journal of Nuclear Materials, 440, 46 (2013). Doi: http://dx.doi.org/10.1016/j.jnucmat.2013.03.088    DOI
3 L. Thomas, B.R. Johnson, J.S. Vetrano and S.M. Bruemmer, Microstructural and Microchemical Characterization of Primary-Side Cracks in an Alloy 600 Nozzle Head Penetration and its Alloy 182 J-Weld from the Davis-Besse Reactor Vessel, Proc. 12th Int. Conf. on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactor, pp. 567 - 578, Pacific Northwest National Lab., Richland, WA (2005). 
4 H. Xu and S. Fyfitch, Proc. of the 12th Int. Conf. on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactor, p. 833, NACE, Houston (2005). 
5 P.M. Scott and M. Le Calvar, Proc. 6th Int'l Conf. on Environmental Degradation of Materials in Nuclear Power Systems-water Reactor, pp. 657 - 665, San Diego, CA (1993). 
6 L. Volpe, M.G. Burke and F. Scenini, Correlation between grain boundary migration and stress corrosion cracking of Alloy 600 in hydrogenated steam, Acta Materialia, 186, 454 (2020). Doi: https://doi.org/10.1016/j.actamat.2020.01.020    DOI
7 Z. Shen, K. Chen, D. Tweddle, G. He, K. Arioka and S. Lozano-Perez, Characterization of the crack initiation and propagation in Alloy 600 with a cold-worked surface, Corrosion Science, 152, 82 (2019). Doi: https://doi.org/10.1016/j.corsci.2019.03.014    DOI
8 G. Bertali, F. Scenini and M.G. Burke, Advanced micro-structural characterization of the intergranular oxidation of Alloy 600, Corrosion Science, 100, 474 (2015). Doi: http://dx.doi.org/10.1016/j.corsci.2015.08.010    DOI
9 Y.S. Lim, H.P. Kim and S.S. Hwang, Oxidation behavior around the stress corrosion crack tips of Alloy 600 under PWR primary water environment, Corrosion Science and Technology, 11, 141 (2012). https://www.j-cst.org/opensource/pdfjs/web/pdf_viewer.htm?code=C00110400141    DOI
10 S.A. Attanasio and D.S. Morton, Measurement of the nickel/nickel oxide transition in Ni-Cr-Fe alloys and updated data and correlations to quantify the effect of aqueous hydrogen on primary water SCC, Proc. of the 11th Int. Conf. on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactor, p. 143, Lockheed Martin Corporation, Schenectady, NY 12301 (2003). Doi: https://doi.org/10.2172/821507    DOI
11 P.L. Andresen, J. Hickling, A. Ahluwalia and J. Wilson, Effects of Hydrogen on Stress Corrosion Crack Growth Rate of Nickel Alloys in High-Temperature Water, Corrosion, 64, 707 (2008). Doi: https://doi.org/10.5006/1.3278508    DOI
12 S.-H. Jeon, E.-H. Lee and D.H. Hur, Effects of dissolved hydrogen on general corrosion behavior and oxide films of alloy 690TT in PWR primary water, Journal of Nuclear Materials, 485, 113 (2017). Doi: http://dx.doi.org/10.1016/j.jnucmat.2016.12.020    DOI
13 D. B. Williams and C.B. Carter, Transmission Electron Microscopy IV Spectroscopy, 1st ed., Plenum Press, New York (1996). 
14 D.J. Dyson and K.W. Andrews, Carbide M7C3 and its formation in alloy steels, Journal of the Iron and Steel Institute, 207, 208 (1969). 
15 Y.S. Lim, H.P. Kim, H.D. Cho and H.H. Lee, Microscopic examination of an Alloy 600/182 weld, Materials Characterization, 60, 1496 (2009). Doi: https://doi.org/10.1016/j.matchar.2009.08.005    DOI
16 T.M. Angeliu and G.S. Was, Behavior of grain boundary chemistry and precipitates upon thermal treatment of controlled purity Alloy 690, Metallurgical Transactions A, 21A, 2097 (1990). 
17 T.S. Mintz and T.M. Devine, Proc. 12th Int. Conf. on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactor, p. 873 (2005). 
18 M.J. Olszta, D.K. Schreiber, M.B. Toloczko and S.M. Bruemmer, Proc. 16th Int. Conf. on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactor, p. 883 (2013). 
19 F. Huang, J. Wang, E.-H. Han and W. Ke, Microstructural characteristics of the oxide films formed on Alloy 690 TT in pure and primary water at 325 ℃, Corrosion Science, 76, 52 (2013). Doi: http://dx.doi.org/10.1016/j.corsci.2013.06.023    DOI
20 P. Combrade, P.M. Scott, M. Foucault, E. Andrieu and P. Marcus, Proc. 12th Int. Conf. on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactor, pp. 883 - 890, Salt Lake City, USA (2005). 
21 Y.S. Lim, S.W. Kim, S.S. Hwang, H.P. Kim and C. Jang, Intergranular oxidation of Ni-based Alloy 600 in a simulated PWRprimary water environment, Corrosion Science, 108, 125 (2016). Doi: http://dx.doi.org/10.1016/j.corsci.2016.02.040   DOI