• Journal of Aquaculture
• /
• v.11 no.2
• /
• pp.133-140
• /
• 1998

A 20-week growth trial was conducted in flow-through aquarum system to investigate the practical dietary carbohydrate sources for juvenile abalone (Haliotis discus hannai). Four replicate grops of the abalone averaging 0.125g were fed one of eight diets containing 24.2% wheat flour (WF), 20% dextrin (DEX), 20% sucorse (SUC), 10% $^{\alpha}$-potato starch+10% $^{\beta}$-potato starch (ab-S), 15% $^{\alpha}$-potato starch (a-S15), 20% $^{\alpha}$-potato starch (a-S20), 25% $^{\alpha}$-potato starch (a-S25), or mixture (MIX) with practical ingredients such as soybean meal, corn gluten meal, cotton seed meal and heat flour. In addition, these formulated diets were compare with macroalgae such as dried sea mustard Undaria (D-SM) or dried sea tangle Laminaria(D-ST). Survival rate, weight gain, shell growth and soft body weight of abalone were not significantly affected by the different dietary carbohydrate sources (P>0.05), whereas those fed a-S15 diet were slightly low. These values of abalone fed D-ST were lowest (P<0.05), followed by those fed D-SM. Lipid contents of soft body from abalones fed a-S25, D-ST or D-SM were significantly lower than those of abalone fed other diets (P<0.05). These data indicate that abalone can equally utilize any carbohydrate sources used in this study.

• Korean Chemical Engineering Research
• /
• v.54 no.6
• /
• pp.746-752
• /
• 2016

In this study, soft carbon was prepared by carbonization of carbon precursor (pitch) obtained from PFO (pyrolysis fuel oil) heat treatment. Three carbon precursors prepared by the thermal reaction were 3903 (at $390^{\circ}C$ for 3 h), 4001 (at $400^{\circ}C$ for 1 h) and 4002 (at $400^{\circ}C$ for 2 h). After the prepared soft carbon was ground to a particle size of $25{\sim}35^{\circ}C$, the soft carbon was synthesised by the chemical treatment with boric acid ($H_3BO_3$). The prepared soft carbon were analysed by XRD, FE-SEM and XPS. Also, the electrochemical performances of soft carbon were investigated by constant current charge/discharge test, cyclic voltammetry and impedance tests in the electrolyte of $LiPF_6$ dissolved inorganic solvents (EC:DMC=1:1 vol%+VC 3 wt%). The coin cell using soft carbon of $25{\sim}35^{\circ}C$ with 3903 soft carbon ($H_3BO_3$/Pitch=3:100 in weight) has better initial capacity and efficiency (330 mAh/g, 82%) than those of other coin cells. Also, it was found that the retention rate capability of 2C/0.1C was 90% after 30 cycles.

• Journal of the Korean Electrochemical Society
• /
• v.19 no.3
• /
• pp.63-68
• /
• 2016

$Li_4Ti_5O_{12}$ is prepared through a solid-state reaction between anatase $TiO_2$ and $Li_2CO_3$ for the negative electrode active materials in quick-charging lithium-ion batteries. The small amount of carbon black (0, 0.5, 1.0, and 3.0 wt%) is added for the reduction of powder agglomeration during heat-treatment. As the amount of the added carbon black increases, the tap density of $Li_4Ti_5O_{12}$ powder gradually decreases. Furthermore, the $Li_4Ti_5O_{12}$ powder prepared with 1.0 wt% of carbon black shows the highest sieved fraction at the powder classification by 325 mesh standard sieve. The $Li_4Ti_5O_{12}$ powders with various contents of carbon black are almost same at the rate capability for the negative electrode materials in lithium-ion batteries.

• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.288-293
• /
• 2016

The study was performed to evaluate thermal insulation covering materials (TICMs) to protect peach trunks against freezing temperatures in winter season by investigating thermo-physical properties and practical thermal insulation effect of the TICMs which was made of white non-woven fabrics, yellow paper sheets, and waterproof fabric pads. Among the three TICMs, Waterproof fabric pad (double layer) possessed the best performance about thermal insulation rate and thermal resistance among three kinds of TICMs. Day thermal insulation effects of waterproof fabric pad, which prevent from temperature rise on the bark tissues of trunks during the day time, were $14.09^{\circ}C$. Night thermal insulation effects of them, which prevent from temperature decline on the bark tissues of trunks at night time, were $7.23^{\circ}C$. Waterproof fabric pad showed the highest day and night thermal insulation effects. Thus our results suggest that development of TICMs using waterproof fabric pad might be helpful to protect the bark tissues of trunks from freezing injury.

• Molecular & Cellular Toxicology
• /
• v.1 no.2
• /
• pp.116-123
• /
• 2005

The application of high pressure on cellular morphology, proliferation and protein expression of Jurkat cells (human T lymphocyte cell line) has been extensively investigated. In the present study, we manufactured a novel pressure chamber that modulates 5% $CO_{2}$, temperature and pressure (up to 3 ATA). Jurkat cells was incubated 2 ATA pressure and analyzed cellular morphology and growth using an electron microscopy and MTT assay. The cells showed the morphological changes in the cell surface, which appeared to cause a severe damage in cell membrane. The growth rate of the cells under 2 ATA pressure decreased as cultured time got increased. Furthermore, a long term exposure of high pressure on Jurkat cells may act as one of the important cellular stresses that leads to inducing cell death. Cellular proteomes were separated by 2-dimensional electrophoresis with pH 3-10 ranges of IPG Dry strips. And many proteins showed significant up-and-down expressions with hyperbaric pressure. Out of all, 10 spots were identified significantly using matrix-assisted laser desorption/ionization-time of fight (MALDI-TOF) mass spectrometry. We and found that 9 protein expressions were decreased and one protein, heat shock protein HSP 60, was increased in Jurkat cells under 2 ATA. Identified proteins were related to lipid metabolism and signal transduction.

• Journal of Life Science
• /
• v.20 no.9
• /
• pp.1339-1344
• /
• 2010

In order to produce environmental-friendly fermented compost, a cattle manure-sawdust compost (antifungal compost) was developed by inoculation of B. licheniformis KJ-9 to cattle manure-sawdust. The thermal stability of the antifungal substance produced by B. licheniformis KJ-9 maintained more than 60% antifungal activity with heat treatment at $100^{\circ}C$ for 10 min, and the optimum pH of antifungal activity of the substance was 7.0. In a pot experiment with red pepper, the antifungal compost increased 1.5~2 times in leaf number and stem and root growth rate compared to those of commercial compost. Also, the diameter of stems increased 1.5-3 times in the antifungal compost treated group. The amount of microbes increased markedly in soil supplemented with antifungal compost compared to the control. In the field experiment for cultivation of garlic and Perilla japonica, the growth of both crops was significantly enhanced in the field treated with antifungal compost as compared to the commercial compost.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.5
• /
• pp.553-562
• /
• 2012

Computational Fluid Dynamics (CFD) analysis has been performed to estimate the air temperature inside an Auxiliary Feed Water (AFW) Motor-Driven (MD) pump room for the case where there is loss of Heating, Ventilation, and Air-Conditioning (HVAC). A transient calculation for the closed pump room without cooling by any HVAC system shows that the volume-averaged air temperature reaches around $60^{\circ}C$ for a transient period of 8.0 h. From previous studies, the external air and surface boundary temperatures are assumed to increase slowly starting from an initial temperature of $35^{\circ}C$. For the cases where the door is opened at 2, 4, and 6 h after the initiation of HVAC failure, the average air temperature promptly drops by about $4^{\circ}C$ when the door is opened and then slowly increases. The current calculations based on the CFD technique predict the rate of increase of air temperature to be lower than that determined by previous conservative calculations on the basis of a lumped model.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.5
• /
• pp.413-421
• /
• 2014

Desiccant cooling system is an air conditioning system that uses evaporative cooler to cool air and it can perform cooling by using heat energy only without electrically charged cooler. Thus, it can solve many problems of present cooling system including the destruction of ozone layer due to the use of CFC[chloro fluoro carbon] affiliated refrigerants and increase of peak power during summer season. In this study, cooling performance and exergy analysis was conducted in order to increase efficiency of desiccant cooling system. Especially, using exergy analysis based on the second law of thermodynamics can resolve the issue related to system efficiency in a more fundamental way by analyzing the cause of exergy destruction both in whole system and each component. The purpose of this study is to evaluate COP[coefficient of performance], cooling capacity and exergy performance of desiccant cooling system incorporating a regenerative evaporative cooler in various regeneration temperature and outdoor air conditions.

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.510-518
• /
• 2018

Recently, lots of interests have been concentrated on the scrubber system that abates waste gases produced from semiconductor manufacturing processes. An effective design of the thermal decomposition reactor inside a scrubber system is significantly important since it is directly related to the removal performance of pollutants and overall stabilities. In the present study, a computational fluid dynamics (CFD) analysis was conducted to figure out the thermal and flow characteristics inside the reactor of wet scrubber. In order to verify the numerical method, the temperature at several monitoring points was compared to that of experimental results. Average error rates of 1.27~2.27% between both the results were achieved, and numerical results of the temperature distribution were in good agreement with the experimental data. By using the validated numerical method, the effect of the reactor geometry on the heat transfer rate was also taken into consideration. From the result, it was observed that the flow and temperature uniformity were significantly improved. Overall, our current study could provide useful information to identify the fluid behavior and thermal performance for various scrubber systems.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.1
• /
• pp.87-103
• /
• 2016

The purpose of this study was to analyze the food-related lifestyle choices of female baby boomers and to investigate variables regarding home meal replacement (HMR) buying behaviors and future needs. This study was conducted on 358 female baby boomers 53 years of age living in Gyeonggi and near Seoul. Out of 420 distributed questionnaires, 358 were returned and used for analysis (response rate: 85.2%). As a result of cluster analysis, three groups were identified based on the food-related lifestyles : a value-seeking group, a convenience-seeking group, and a health-seeking group. Among the three groups, there were significant differences in two socio-demographic characteristics, education level (p<0.05) and regular exercise (p<0.01), and in several health- and food-related habits, type of breakfast (p<0.01), type of dinner (p<0.05), dinner details (p<0.05), frequency of eating out (p<0.05), and eating habits score (p<0.01). The health-seeking group was significantly more likely to purchase ready to cook (RTC) items (59.1%) than were the other groups (p<0.001). However, the ratio of HMR purchasing for the purpose of meal replacement (p<0.05) and an HMR purchasing frequency of more than twice a week (p<0.001) were significantly lower in the health-seeking group. Reasons for selecting HMR showed a similar tendency among groups in taste (26.2%), convenience (18.7%), price (16.9%), safety (15.3%) and type of food (14.3%). However, the satisfaction scores for hygiene and safety reported by the health-seeking group were significantly lower than those reported by the other groups. More than two-thirds of all respondents were willing to purchase HMR in the future, though there were significant differences according to group: convenience-seeking group, 73.1%, health-seeking group, 70.1%, and value-seeking group, 65.7% (p<0.05). Our results suggest that the number of baby boomers purchasing HMR products will continue to grow and baby boomers will want HMR products to be more healthy (52.0%), safe (28.5%) and delicious (13.4%). An emphasis on taste was high in the convenience-seeking group, whereas an emphasis on health was high in the health-seeking and value-seeking groups. In conclusion, this study shows various food-related lifestyles amongst female baby boomers and illustrates the need to develop HMR marketing strategies targeted to these different lifestyles.