• Food Science of Animal Resources
• /
• v.41 no.2
• /
• pp.261-273
• /
• 2021

Leuconostoc mesenteroides H40 (H40) was isolated from kimchi, and its probiotic properties and neuroprotective effect was evaluated in oxidatively stressed SH-SY5Y cells. H40 was stable in artificial gastric conditions and can be attached in HT-29 cells. In addition, H40 did not produce β-glucuronidase and showed resistant to several antibiotics. The conditioned medium (CM) was made using HT-29 cells refined with heat-killed probiotics (Probiotics-CM) and heated yogurts (Y-CM) to investigate the neuroprotective effect. Treatment with H40-CM not only increased cell viability but also significantly improved brain derived neurotropic factor (BDNF) expression and reduced the Bax/Bcl-2 ratio in oxidatively stress-induced SH-SY5Y cells. Besides, probiotic Y-CM significantly increased BDNF mRNA expression and decreased Bax/Bcl-2 ratio. The physicochemical properties of probiotic yogurt with H40 was not significantly different from the control yogurt. The viable cell counts of lactic acid bacteria in control and probiotic yogurt with H40 was 8.66 Log CFU/mL and 8.96 Log CFU/mL, respectively. Therefore, these results indicate that H40 can be used as prophylactic functional dairy food having neuroprotective effects.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1992.10a
• /
• pp.185-190
• /
• 1992

ACI318-89 Recommended that when the specified compressive strength of concrete in a column is greater than1.4 times that specified for a floor system, top surface of the column concrete shall extend 2ft(600mm)into the slab from the face of column to avoid unexpected brittle failure. The major variables are extension distance, flexural strength ratio(Mr), and shear reinforcement ratio(Vs). Test results are as follows ; (1) The failure modes of specimens under cyclic loading were concentrated at critical region from beam-column joint face. (2) Ductility index($\mu$f) were increased with increasing of shear confinement ratio and flexural strength ratio. (3)The specimens with 2ft extension distance showed more ductility than the specimens with 1ft extension distance.

• Korean Chemical Engineering Research
• /
• v.45 no.5
• /
• pp.448-454
• /
• 2007

Hydrothermal synthesis was conducted with starting material as Barium hydroxide and hydrous titania ($TiO_2{\cdot}xH_2O$) to obtain barium titanate fine Powder. The conversion, crystal structure and properties of as-prepared powder were investigated according to reaction temperature, time and concentration. The effect of variables on conversion was in order of time < temperature < concentration and the maximum conversion reached to 99.5% in the case of hydrothermal synthesis at $180^{\circ}C$ for 2 h with 2.0 M reactant concentration. At low concentration such as 0.25 M, formation of unreacted $BaCO_3$ and $TiO_2$ was not inevitable at even high reaction temperature and these components converted into $BaTi_2O_5$ at high temperature and remained as impurity. As concentration of reactant increased, the size of as-synthesized $BaTiO_3$ powder deceased and Ba/Ti molar ratio approached into 1, showing Ba/Ti ratio of $1{\pm}0.005$ for reaction at $180^{\circ}C$ for 2 h with 2.0 M concentration.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.543-544
• /
• 2010

• Transactions of the Korean hydrogen and new energy society
• /
• v.11 no.4
• /
• pp.149-159
• /
• 2000

This paper is concerned with the performence of a steam reformer for 25kW class MCFC, which is compared with the theoretically calculated results at various operating conditions. The theoretical $H_2$ production amount and $CH_4$ conversion rate are calculated with variations of temperature and steam/carbon (S/C) ratio using fortran program, and the actual values are measured from flowmeter and gas chromatography. As a result of the comparison of theoretical and actual values, the theoretical $H_2$ production amount is calculated by $24.4m^3/hr$ at the normal operating condition(LNG $9m^3/hr$, S/C ratio 5, absolute pressure $2.77kg/cm^2$, $610^{\circ}C$), but the actual production amount is only $19.4m^3/hr$, which is 79.5% of the theoretical value. Nevertheless, at the normal operating condition, the reformer for 25kW class MCFC performed well for a 2,100 hr long run operation, constantly producing $H_2$.

• Journal of Energy Engineering
• /
• v.22 no.4
• /
• pp.347-354
• /
• 2013

This study was carried out to examine different mole ratio of $H_2/CO_2$ and EBCT using the continuous system in the lab scale throughout biological methods with accumulated hydrogenotrophic methanogen that can convert $CO_2$ to $CH_4$. The experimental-based results with various gas mixtures of mole ratio of 4:1($H_2/CO_2$) and 5:1($H_2/CO_2$), $H_2$ was converted more than 99% conversion rate. In case of $CO_2$, 4:1($H_2/CO_2$) and 5:1($H_2/CO_2$) were $74.45{\pm}0.33%$, $95.8{\pm}10.7%$, respectively, in addition, the study was confirmed that the amount of $H_2$ was more needed than stoichiometric equations, where approach methods are empirical versus theoretical frameworks, for converting total $CO_2$. As such, we have noticed that $H_2$ was used for energy source of hydrogenotrophic methanogen for maintaining life. Regarding the results of the ratio of treatment by retention time, limitation of treatment capacity showed that $H_2$(99.9%) and $CO_2$(96.23%) at EBCT 3.3 hrs indicated stable conversion ratio, as well as appeared that methane production rate and $CO_2$ fixation rate were investigated $1.15{\pm}0.02m^3{\cdot}m^{-3}{\cdot}day^{-1}$ and $2.01{\pm}0.04kg{\cdot}m^{-3}{\cdot}day^{-1}$, respectively.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.236-237
• /
• 2005

An experimental study on the Hybrid Cooling Tower has been done having a rated capacity of 3RT. Counter flow type fill, cross flow type fill and hybrid-type fill which is combined with two type fills as previously stated having a height of 0.3m have been used in the 0.8m${\times}$0.4m${\times}$1.9m dimensional tower respectively. The heat exchanger is consisting of 2 or 3 rows. The relevant temperatures and the velocities were selected based on the typical Korean weather for the year round operation of the tower. The cooling capacity of the tower is explained with respect to varying air inlet velocities, wet-bulb temperatures, and air to cooling water volume flow rate ratio (L/G ratio). The capacity of the hybrid-type fill was much superior to other fills, but hybrid-type fill shows higher pressure drop.

• Electrical & Electronic Materials
• /
• v.9 no.9
• /
• pp.906-910
• /
• 1996

Ferroxplana N $i_{2}$Y(B $a_{2}$N $i_{2}$F $e_{12}$ $O_{22}$ ) magnetic particles, which is one of the hexagonal ferrite were synthesized by a coprecipitation method. The coprecipitates were prepared by adding aqueous solution of BaC $I_{2}$ - 2 $H_{2}$O, NiC $I_{2}$ - 6 $H_{2}$O and FeC $I_{3}$ - 6 $H_{2}$O(of which the mole ratio is $Ba^{+2}$ : N $i^{+2}$ : F $e^{3+}$= 1 : 1 : 6) to a mixture of NaOH and N $a_{2}$C $O_{3}$. The shape of Ferroxplana N $i_{2}$Y magnetic particles obtained at 1, 100(.deg. C) was hexagonal plate-like, average particle size and aspect ratio were 2(.mu.m) and 7, respectively.y.

• Journal of the Korean Ceramic Society
• /
• v.38 no.12
• /
• pp.1150-1154
• /
• 2001

Silicon oxynitride (SiON) thick films using the core layer of silica optical waveguide have been deposited on Si wafer by PECVD at low temperature (32$0^{\circ}C$) were obtained by decomposition of appropriate mixture of (SiH$_4$+$N_2$O+$N_2$) gaseous mixtures under RF power and SiH$_4$/($N_2$O+$N_2$) ratio deposition condition. Prism coupler measurements show that the refractive indices of SiON layers range from 1.4663 to 1.5496. A high SiH$_4$/($N_2$O+$N_2$) of 0.33 and deposition power of 150 W leads to deposition rates of up to 8.67 ${\mu}{\textrm}{m}$/h. With decreasing SiH$_4$/($N_2$O+$N_2$) ratio, the SiON layer become smooth from 41$\AA$ to 6$\AA$.

• Food Science of Animal Resources
• /
• v.31 no.5
• /
• pp.727-730
• /
• 2011

The effects of various NaCl levels (0, 0.3, and 0.6 M) and pH values (pH 5.0, 5.5, 6.0, and 6.5) on the emulsifying and gelling properties of pork myofibrillar protein (MP) were assessed. The emulsion stability index (ESI), emulsifying activity index (EAI), and creaming index were measured at a 1:20 ratio of MP to corn oil. The EAI and ESI of pork MP showed maximum values at pHs 6.0 and 6.5 and at 0.3 M NaCl, resulting in better emulsion properties. Additionally, the cooking yield (CY) and gel strength (GS) of emulsified MP gel were measured at an MP: corn oil ratio of 1: 2; GS increased with increasing levels of salt. At 0.6 M NaCl, GS decreased with decreasing pH from 5.5 to 6.5. GS and gelling properties were optimal at pH 5.5 in 0.6 M salt. The highest CY was observed at 0.6 M NaCl, regardless of the pH value. However, increasing pH increased CY at salt levels of 0 and 0.3 M. These results indicate that NaCl and pH profoundly affected the emulsified MP system. Future work will be conducted on the rheological properties of the pork emulsified system as affected by adding non-meat protein.