• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.486-489
• /
• 2002

본 논문에서는 50nm 이하의 double gate MOSFET의 특성을 조사하였다. 1.5V의 main gate 전압과 3V의 side gate 전압이 인가될 때 I-V 특성으로부터 IDsat=510$\mu$A/$\mu\textrm{m}$을 얻을 수 있었다. 이때, 전달 컨덕턴스는 111$\mu$A/V, subthreshold slope는 86mV/dec, DIBL값은 51.3mV이다. 그밖에 TCAD tool이 소자 시뮬레이터로서 적합함을 나타내었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.184-187
• /
• 2002

In this work, the electrical characteristics of organic thin film transistors with the stacked organic gate insulators have been studied. PVP(Polyvinylphenol) and polystyrene were used as gate insulating materials. Both the high dielectric constant of PVP and better insulating capability of polystyrene were compensatorily adopted in two different stacking orders of PVP-polystyrene and polystyrene-PVP. The output characteristics of the device with the stacked gate insulator showed substantial improvement compared with those of the devices with either PVP or polystyrene gate insulator: Furthermore, these stacked organic gate insulators can differently affect the TFT characteristics with the stacking orders. The electrical properties of TFTs with organic gate insulators stacked in different orders are discussed.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.498-501
• /
• 2002

본 논문에서는 main gate(MG)와 side gate(SG)를 갖는 double gate(DG) MOSFET를 디자인하고 TCAD를 이용하여 시뮬레이션하였다. MG와 SG의 길이(LMG, LSG)는 각각 50nm, 70nm로 하였으며, MG와 SG의 전압(VMG, VSG)이 각각 1.5V, 3.0V일 때 드레인전압(VD)을 0에서 1.5V까지 변화시키면서 핀치오프특성을 조사하였다. LMG가 아주 작음에도 불구하고, 핀치-오프특성이 아주 좋게 나타났다. 이것은 DG MOSFET의 VMG가 게이트를 제어하는 역할을 잘 수행하여 나노 구조에서 유용한 구조임을 알 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제26권10호
• /
• pp.720-725
• /
• 2013

Power MOSFET operate voltage-driven devices, design to control the large power switching device for power supply, converter, motor control, etc. We have analyzed trench process, field limit ring process for fabrication of unified trench gate power MOSFET. And we have analyzed electrical characteristics of fabricated unified trench gate power MOSFET. The optimal trench process was based on SF6. After we carried out SEM measurement, we obtained superior trench gate and field limit ring process. And we compared electrical characteristics of planar and trench gate unified power MOSFET after completing device fabrication. As a result, the both of them was obtained 500 V breakdown voltage. However trench gate unified power MOSFET was shown improved Vth and on state voltage drop characteristics than planar gate unified power MOSFET.

• 한국전기전자재료학회논문지
• /
• 제29권5호
• /
• pp.263-267
• /
• 2016

In this paper, we analyzed the electrical characteristics of NPT planar and trench gate IGBT after designing these devices according to design and process parameter. To begin with, we have designed NPT planar gate IGBT and carried out simulation with T-CAD. Therefore, we extracted design and process parameter and obtained optimal electrical characteristics. The breakdown voltage was 724 V and The on state voltage drop was 1.746 V. The next was carried out optimal design of trench gate power IGBT. We did this research by same drift thickness and resistivity of planar gate power IGBT. As a result of experiment, we obtain 720 V breakdown voltage, 1.32 V on state voltage drop and 4.077 V threshold voltage. These results were improved performance and fabrication of trench gate power IGBT and planar gate Power IGBT.

• 한국정보통신학회논문지
• /
• 제6권7호
• /
• pp.1074-1078
• /
• 2002

본 논문에서는 main gate(MG)와 side gate(SG)를 갖는 double gate(DG) MOSFET를 디자인하고 TCAD를 이용하여 시뮬레이션하였다. MG와 SG의 길이(LMG, LSG)는 각각 50nm, 70nm로 하였으며, MG와 SG의 전압(VMG, VSG)이 각각 1.5V, 3.0V일 때 드레인전압(VD)을 0에서 1.5V까지 변화시키면서 핀치오프특성을 조사하였다. LMG가 아주 작음에도 불구하고, 핀치-오프특성이 아주 좋게 나타났다. 이것은 DG MOSFET의 VMG가 게이트를 제어하는 역할을 잘 수행하여 나노 구조에서 유용한 구조임을 알 수 있었다.

• 전자공학회논문지A
• /
• 제30A권1호
• /
• pp.23-30
• /
• 1993

Hydrogenation on the top gate and bottom gate Poly-Si TET's was performed by using Nh$_{3}$ plasma and annealing SiN film deposited by PECVD and then the electric characteristics on Poly-Si TET were investigated. As the time of NA$_{3}$ plasma treatment increaes, on/off current ratio gradually increases and the swing value decreases. The trap densities of graim boundaries in Poly-Si decrease very much during the inital 20min of hydrogenation time, and the decreasing scale becomes smaller after 20 min. The electric characteristics of the top gate TFT are better than those of the bottom gate TFT, it is considered due to the defects at the interface between the Poly-Si and the underlayer, SiO$_{2}$. After NH$_{3}$ plasma was treated for 2 hours for the top gate TFT, as the aging time atroon temperature increases on current was not scacely changed and off current decreases more than 1 order. Gate current density recovers to original value after the aging treatment for 8 days and then the electric characteristics are finally improved. It is suggested that the degraded characteristics of gate oxide are improved, from the variations of C-V characteristics with aging time. For the hydrogenation of isothermal and isochronal annealing SiN film deposited by PECVD, the characteristics of Poly-Si TFT are improved with increasing annealing temperature and are not largely changed with increasing annealing time. This results is good in agreement with the hydrogen reduction in Sin film as variations of annealing temperature and time.

• 전기전자학회논문지
• /
• 제16권4호
• /
• pp.283-289
• /
• 2012

이 논문에서 Trench Power MOSFET의 스위칭 성능을 향상시키기 위한 Separate Gate Technique(SGT)을 제안하였다. Trench Power MOSFET의 스위칭 성능을 개선시키기 위해서는 낮은 gate-to-drain 전하 (Miller 전하)가 요구된다. 이를 위하여 제안된 separate gate technique은 얇은(~500A)의 poly-si을 deposition하여 sidewall을 형성함으로서, 기존의 Trench MOSFET에 비해 얇은 gate를 형성하였다. 이 효과로 gate와 drain에 overlap 되는 면적을 줄일 수 있어 gate bottom에 쌓이는 Qgd를 감소시키는 효과를 얻었고, 이에 따른 전기적인 특성을 Silvaco T-CAD silmulation tool을 이용하여 일반적인 Trench MOSFET과 성능을 비교하였다. 그 결과 Ciss(input capacitance : Cgs+Cgd), Coss(output capacitance : Cgd+Cds) 및 Crss(reverse recovery capacitance : Cgd) 모두 개선되었으며, 각각 14.3%, 23%, 30%의 capacitance 감소 효과를 확인하였다. 또한 inverter circuit을 구성하여, Qgd와 capacitance 감소로 인한 24%의 reverse recovery time의 성능향상을 확인하였다. 또한 제안된 소자는 기존 소자와 비교하여 어떠한 전기적 특성저하 없이 공정이 가능하다.

• Transactions on Electrical and Electronic Materials
• /
• 제5권5호
• /
• pp.169-172
• /
• 2004

Deep sub-micron device required to get the superior ultra thin gate oxide characteristics. In this research, I will recommend a novel shallow trench isolation structure(STI) for thin gate oxide and a $N_2$O gate oxide 30 $\AA$ by NO ambient process. The local oxidation of silicon(LOCOS) isolation has been replaced by the shallow trench isolation which has less encroachment into the active device area. Also for $N_2$O gate oxide 30 $\AA$, ultra thin gate oxide 30 $\AA$ was formed by using the $N_2$O gate oxide formation method on STI structure and LOCOS structure. For the metal electrode and junction, TiSi$_2$ process was performed by RTP annealing at 850 $^{\circ}C$ for 29 sec. In the viewpoints of the physical characteristics of MOS capacitor, STI structure was confirmed by SEM. STI structure was expected to minimize the oxide loss at the channel edge. Also, STI structure is considered to decrease the threshold voltage, result in a lower Ti/TiN resistance( Ω /cont.) and higher capacitance-gate voltage(C- V) that made the STI structure more effective. In terms of the TDDB(sec) characteristics, the STI structure showed the stable value of 25 % ～ 90 % more than 55 sec. In brief, analysis of the ultra thin gate oxide 30 $\AA$ proved that STI isolation structure and salicidation process presented in this study. I could achieve improved electrical characteristics and reliability for deep submicron devices with 30 $\AA$ $N_2$O gate oxide.

• 한국재료학회지
• /
• 제13권1호
• /
• pp.11-17
• /
• 2003

DC characteristics of recessed gate 4H-SiC MESFET were investigated using the device/circuit simulation tool, PISCES. Results of theoretical calculation were compared with the experimental data for the extraction of modeling parameters which were implemented for the prediction of DC and gate leakage characteristics at high temperatures. The current-voltage analysis using a fixed mobility model revealed that the short channel effect is influenced by the defects in SiC. The incomplete ionization models are found out significant physical models for an accurate prediction of SiC device performance. Gate leakage is shown to increase with the device operation temperatures and to decrease with the Schottky barrier height of gate metal.