• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2609-2614
• /
• 2010

Temperature compensation circuit is implemented by using the temperature sensor, and Intermodulation (IM) Specification of Power Amplifier is satisfied in the temperature range of $-30^{\circ}C{\sim}60^{\circ}C$ with this temperature compensation circuit. The output voltage of temperature compensation circuit which vary 170mV with the temperature is applied to the gate of TR in 3W output power Amplifier. As the result, right 3rd IM component is -18.5~-26dBm, left 3rd IM component is -18.5~-35dBm, and the left and right 5th IM component is -24~-26dBm in the temperature range of $-30^{\circ}C{\sim}60^{\circ}C$. It is confirmed that IM specification of power amplifier which is under -17dBm in the whole temperature range is satisfied.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.190-192
• /
• 2018

This paper describes a design of an elliptic curve cryptography (ECC) processor that supports five pseudo-random curves and five Koblitz curves over binary field defined by the NIST standard. The ECC processor adopts the Lopez-Dahab projective coordinate system so that scalar multiplication is computed with modular multiplier and XORs. A word-based Montgomery multiplier of $32-b{\times}32-b$ was designed to implement ECCs of various key lengths using fixed-size hardware. The hardware operation of the ECC processor was verified by FPGA implementation. The ECC processor synthesized using a 0.18-um CMOS cell library occupies 10,674 gate equivalents (GEs) and 9 Kbits RAM at 100 MHz, and the estimated maximum clock frequency is 154 MHz.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.1
• /
• pp.36-44
• /
• 2003

This paper proposes a Viterbi decoding scheme without trace-back operations to reduce the amount of memory storing the survivor path information, and to increase the decoding speed. The proposed decoding scheme is a modified register exchange scheme, and is verified by a simulation to give the same results as those of the conventional decoders. It is compared with the conventional decoding schemes such as the trace-back and the register exchange scheme. The memory size of the proposed scheme is reduced to 1/(5 x constraint length) of that of the register exchange scheme, and the throughput is doubled compared with that of the trace-back scheme. A decoder with a code rate of 2/3, a constraint length, K＝3 and a trace-back depth of 15 is designed using VHDL and implemented in an FPGA. It is also shown that the modified register exchange scheme can be applied to a block decoding scheme.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.6
• /
• pp.48-51
• /
• 2009

One-stage low noise amplifier (LNA) using 65 nm RF CMOS technology below 20 GHz is designed to find the optimal bias voltage and optimal width of input transistor so that the maximum figure of merit (FoM) has been achieved. If the frequency is higher than 13 GHz, the amplifier needs two-stage to achieve the higher gain. If the frequency is lower than 5 GHz, one additional capacitor between gate and source should be added to control the power under the limitation. This paper summarizes one-stage LNA overall performances below 20 GHz and this approach can also be applied to other CMOS technology of LNA designs.

• Journal of IKEEE
• /
• v.19 no.4
• /
• pp.583-589
• /
• 2015

In the HEVC CABAC, the probability model is updated after a bin is encoded and next bin is encoded based on the updated probability model. Conventional CABAC encoders can encode only one bin per cycle, which cannot increase the encoding throughput. The probability model does not need to be updated in the bypass bins. In this paper, a HEVC CABAC encoder is proposed to increase encoding throughput by parallel processing of bypass bins. The designed CABAC encoder can process either a regular bin or maximum 4 bypass bins in a cycle. On the average, it can process 1.15~1.92 bins in a cycle. Synthesized in 0.18 um technology, its gate count, maximum operating speed, and the maximum throughput are 78,698 gates, 136 MHz, and 261 Mbin/s, respectively.

• Journal of IKEEE
• /
• v.15 no.4
• /
• pp.330-338
• /
• 2011

In this paper, a current-mode buck-boost converter using Multiple switching devices is presented. The efficiency of the proposed converter is higher than that of conventional buck-boost converter. In order to improve the power efficiency at the high current level, the proposed converter is controlled with PWM(pulse width modulation) method. The converter has maximum output current 300mA, input voltage 3.3V, output voltage from 700mV to 12V, 1.5MHz oscillation frequency, and maximum efficiency 90%. Moreover, this paper proposes watchdog circuits in order to ensure the reliability and to improve the performance of dc-dc converters. An electrostatic discharge(ESD) protection circuit for deep submicron CMOS technology is presented. The proposed circuit has low triggering voltage using gate-substrate biasing techniques. Simulated result shows that the proposed ESD protection circuit has lower triggering voltage(4.1V) than that of conventional ggNMOS(8.2V).

• Journal of IKEEE
• /
• v.14 no.2
• /
• pp.82-89
• /
• 2010

In this paper, a buck-boost converter using three DTMOS(Dynamic Threshold Voltage MOSFET) switching devices is presented. The efficiency of the proposed converter is higher than that of conventional buck-boost converter. DTMOS with low on-resistance is designed to decrease conduction loss. The threshold voltage of DTMOS drops as the gate voltage increases, resulting in a much higher current handling capability than standard MOSFET. In order to improve the power efficiency at the high current level, the proposed converter is controlled with PWM(pulse width modulation) method. The converter has maximum output current 300mA, input voltage 3.3V, output voltage from 700mV to 12V, 1.2MHz oscillation frequency, and maximum efficiency 90%. Moreover, the LDO(low drop-out) is designed to increase the converting efficiency at the standby mode below 1mA.

• Journal of IKEEE
• /
• v.17 no.1
• /
• pp.77-82
• /
• 2013

In this paper, dc-dc buck converter controled by the peak current-mode pulse-width-modulation (PWM) presented. Based on the small-signal model, we propose the novel methods of the power stage and the systematic stability designs. To improve the reliability and performance, over-temperature and over-current protection circuits have been designed in the dc-dc converter systems. To prevent electrostatic An electrostatic discharge (ESD) protection circuit is proposed. The proposed dc-dc converter circuit exhibits low triggering voltage by using the gate-substrate biasing techniques. Throughout the circuit simulation, it confirms that the proposed ESD protection circuit has lower triggering voltage(4.1V) than that of conventional ggNMOS (8.2V). The circuit simulation is performed by Mathlab and HSPICE programs utilizing the 0.35um BCD (Bipolar-CMOS-DMOS) process parameters.

• Journal of IKEEE
• /
• v.20 no.3
• /
• pp.273-278
• /
• 2016

In HEVC variable block size motion estimation, same search window data are duplicatedly used in each block size. It increases memory bandwidth, and it is difficult to exploit early termination. In this paper, largest block size and its corresponding smaller block sizes with same positions are performed at the same time. It reduces memory bandwidth and computation by reusing search window data and computation results. In the early termination, image quality can be degraded when it determines early termination by observing largest block size only, since smaller block sizes cannot be equally terminated due to their relative positions. So, in this paper, processing order of early termination is changed to perform smaller block sizes in turns. The designed motion estimation engine was described in Verilog HDL and it was synthesized and verified in 0.18um process technology. Its gate count and maximum operating frequency are 36,101 gates and 263.15 MHz, respectively.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.2
• /
• pp.151-161
• /
• 1996

This paper presents a series of tests to produce the h~gh quality concrete to be filled Inside the steel tube columns. Thls concrete filled steel tube system requires not only the high strength, but a150 the flowable concrete. Laboratory test has been performed to clarlfy the material characteristics and to produce the optlmal mix design proportion. Full scale site mock up test has been then carried out to slnlulate the actual construct~on conditions including the product~on of concrete at the rermcon batch plant, transportation to the construction site, proper workabil~ ty and man power required , 4ddit1onal mock up test has finally been performec to irivesti gate any unfavorable construction s~tuatioils since the actual concrete placement has been sched uled in cold weather period, so that the high quality concrete construction is convinced to be successfully carried out.