• 한국표면공학회지
• /
• 제36권2호
• /
• pp.135-140
• /
• 2003

The difference in lattice parameter and thermal expansion coefficient between GaN and Si which results in many defects into the grown GaN is larger than that between GaN and sapphire. In order to obtain high quality GaN films on Si substrate, it is essential to understand growth characteristics of GaN. In this study, GaN layers were grown on Si(111) substrates by MOCVD at three different GaN growth temperatures ($900^{\circ}C$, $1,000^{\circ}C$ and $1,100^{\circ}C$), using AlN and LT-GaN buffer layers. Using TEM, we carried out the comparative investigation of growth characteristics of GaN by characterizing lattice coherency, crystallinity, orientation relationship and defects formed (transition region, stacking fault, dislocation, etc). The localized region with high defect density was formed due to the lattice mismatch between AlN buffer layer and GaN. As the growth temperature of GaN increases, the defect density and surface roughness of GaN are decreased. In the case of GaN grown at $1,100^{\circ}$, growth thickness is decreased, and columns with out-plane misorientation are formed.

• 한국재료학회지
• /
• 제23권3호
• /
• pp.177-182
• /
• 2013

Nanosphere lithography is an inexpensive, simple, high-throughput nanofabrication process. NSL can be done in different ways, such as drop coating, spin coating or by means of tilted evaporation. Nitride-based light-emitting diodes (LEDs) are applied in different places, such as liquid crystal displays and traffic signals. The characteristics of gallium nitride (GaN)-based LEDs can be enhanced by fabricating nanopatterns on the top surface of the LEDs. In this work, we created differently sized (420, 320 and 140 nm) nanopatterns on the upper surfaces of GaN-based LEDs using a modified nanosphere lithography technique. This technique is quite different from conventional NSL. The characterization of the patterned GaN-based LEDs revealed a dependence on the size of the holes in the pattern created on the LED surface. The depths of the patterns were 80 nm as confirmed by AFM. Both the photoluminescence and electroluminescence intensities of the patterned LEDs were found to increase with an increase in the size of holes in the pattern. The light output power of the 420-nm hole-patterned LED was 1.16 times higher than that of a conventional LED. Moreover, the current-voltage characteristics were improved with the fabrication of differently sized patterns over the LED surface using the proposed nanosphere lithography method.

• 한국재료학회지
• /
• 제27권12호
• /
• pp.699-704
• /
• 2017

Recently, the use of an aluminum nitride(AlN) buffer layer has been actively studied for fabricating a high quality gallium nitride(GaN) template for high efficiency Light Emitting Diode(LED) production. We confirmed that AlN deposition after $N_2$ plasma treatment of the substrate has a positive influence on GaN epitaxial growth. In this study, $N_2$ plasma treatment was performed on a commercial patterned sapphire substrate by RF magnetron sputtering equipment. GaN was grown by metal organic chemical vapor deposition(MOCVD). The surface treated with $N_2$ plasma was analyzed by x-ray photoelectron spectroscopy(XPS) to determine the binding energy. The XPS results indicated the surface was changed from $Al_2O_3$ to AlN and AlON, and we confirmed that the thickness of the pretreated layer was about 1 nm using high resolution transmission electron microscopy(HR-TEM). The AlN buffer layer deposited on the grown pretreated layer had lower crystallinity than the as-treated PSS. Therefore, the surface $N_2$ plasma treatment on PSS resulted in a reduction in the crystallinity of the AlN buffer layer, which can improve the epitaxial growth quality of the GaN template.

• ETRI Journal
• /
• 제30권1호
• /
• pp.158-160
• /
• 2008

A highly linear and efficient GaN HEMT Doherty amplifier for wideband code division multiple access (WCDMA) repeaters is presented. For better performance, the adaptive gate bias control of the peaking amplifier using the power tracking circuit and the shunt capacitors is employed. The measured one-carrier WCDMA results show an adjacent channel leakage ratio of -43.2 dBc at ${\pm}2.5$-MHz offset with a power added efficiency of 40.1% at an average output power of 37 dBm, which is a 7.5 dB back-off power from the saturated output power.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 추계학술대회 논문집
• /
• pp.192-193
• /
• 2013

본 논문에서는 WBG(Wide Band Gap)특성을 갖는 GaN FET의 과도특성을 분석한다. 먼저, GaN(Gallium Nitride) FET의 공개된 정보를 바탕으로 스위칭 과도 특성과 관련된 파라미터들을 정량적으로 추출하고, GaN FET의 동특성을 반영하는 시뮬레이션 모델을 구성한다. 이 모델을 통하여 Si MOSFET과 비교하여 GaN FET의 성능을 예측한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 추계학술대회 논문집
• /
• pp.190-191
• /
• 2013

본 논문에서는 기존의 Si MOSFET을 사용한 전력시스템과 비교하여 WBG(Wide Band Gap)특성을 갖는 GaN(Gallium Nitride) FET을 사용한 전력시스템을 비교 분석한다. 대표성을 갖는 평가가 가능하도록 가장 일반적인 FB 구조를 대상으로 Si MOSFET과 GaN FET을 각각 적용하고, 다양한 기준 조건에서 효율과 전력 밀도 등 성능을 비교한다. 전체 과정은 수학적 계산 및 시뮬레이션으로 검증한다.

• 센서학회지
• /
• 제26권2호
• /
• pp.79-84
• /
• 2017

The drain current of the SB MOSFET was analytically modeled by an equation composed of thermionic emission and tunneling with consideration of the image force lowering. The depletion region electron concentration was used to model the channel electron concentration for the tunneling current. The Schottky barrier width is dependent on the channel electron concentration. The drain current is changed by the gate oxide thickness and Schottky barrier height, but it is hardly changed by the doping concentration. For a GaN SB MOSFET with ITO source and drain electrodes, the calculated threshold voltage was 3.5 V which was similar to the measured value of 3.75 V and the calculated drain current was 1.2 times higher than the measured.

• 전기학회논문지
• /
• 제66권9호
• /
• pp.1351-1358
• /
• 2017

In this work, we investigated radiation hardness of GaN-based transistors which are strong candidates for next-generation power electronics. Field effect transistors with three types of gate structures including metal Schottky gate, recessed gate, and p-AlGaN layer gate were fabricated on AlGaN/GaN heterostructure on Si substrate. The devices were irradiated with energetic protons and alpha-particles. The irradiated transistors exhibited the reduction of on-current and the shift of threshold voltage which were attributed to displacement damage by incident energetic particles at high fluence. However, FET operation was still maintained and leakage characteristics were not degraded, suggesting that GaN-based FETs possess high potential for radiation-hardened electronics.

• Journal of Power Electronics
• /
• 제18권4호
• /
• pp.985-996
• /
• 2018

The implementation and performance evaluation of an interleaved boundary conduction mode (BCM) boost power factor correction (PFC) converter is presented in this paper by employing three wide band-gap switching devices: a super junction silicon (Si) MOSFET, a silicon carbide (SiC) MOSFET and a gallium nitride (GaN) high electron mobility transistor (HEMT). The practical considerations for adopting wide band-gap switching devices to BCM boost PFC converters are also addressed. These considerations include the gate drive circuit design and the PCB layout technique for the reliable and efficient operation of a GaN HEMT. In this paper it will be shown that the GaN HEMT exhibits the superior switching characteristics and pronounces its merits at high-frequency operations. The efficiency improvement with the GaN HEMT and its application potentials for high power density/low profile BCM boost PFC converters are demonstrated.

• 에너지공학
• /
• 제22권1호
• /
• pp.58-81
• /
• 2013

탄화규소(SiC)나 질화갈륨(GaN)과 와이드갭 반도체를 이용한 전력소자의 생산기술이 크게 발전하여 그간 널리 사용되어 온 실리콘(Si) 전력소자와 비교하여 작동전압, 스위칭 속도 및 on-저항 등이 크게 향상되어 몇 개 기업은 제품화를 시작하였다. 내압 등 기술적 과제 등을극복하여 산업화를 하고자하는 움직임을 소개하고 아울러 연구동향도 분석한다.