• 전자공학회논문지 IE
• /
• 제46권3호
• /
• pp.1-5
• /
• 2009

고전력, 고온에서 사용되는 소자에서 RuO2는 다른 전극 물질에 비해 많은 장점을 가지고 있으며, 특히 GaN를 이용하는 소자의 전극물질로서 매우 우수한 특성을 갖음을 확인할 수 있었다. RuO2을 이용한 GaN 소자의 제작은 새로운 전기화학 금속증착법을 통하여 금속배선을 형성하였으며, 과염소산(HClO4)용액을 수용액 사용하였다. RuO2의 두께는 인가전압과 시간에 의존하며, 두께를 조절함으로서 정류성 및 비정류성 소자의 전극으로의 사용 가능성을 확인할 수 있었다.

• 전기학회논문지
• /
• 제60권12호
• /
• pp.2265-2269
• /
• 2011

1 kV high-voltage GaN Schottky diode is realized using GaN-on-Si template by oxidizing Ni-Schottky contact. The Auger electron spectroscopy (AES) analysis revealed the formation of $NiO_x$ at the top of Schottky contact. The Schottky contact was changed to from Ni/Au to Ni/Ni-Au alloy/Au/$NiO_x$ by oxidation. Ni diffusion into AlGaN improves the Schottky interface and the trap-assisted tunneling current. In addition, the reverse leakage current and the isolation-leakage current are efficiently suppressed by oxidation. The isolation-leakage current was reduced about 3 orders of magnitudes. The reverse leakage current was also decreased from 2.44 A/$cm^2$ to 8.90 mA/$cm^2$ under -100 V-biased condition. The formed group-III oxides ($AlO_x$ and $GaO_x$) during the oxidation is thought to suppress the surface leakage current by passivating surface dangling bonds, N-vacancies and process damages.

• 한국전기전자재료학회논문지
• /
• 제22권9호
• /
• pp.751-755
• /
• 2009

We proposed circular AlGaN/GaN schottky barrier diode, which has no mesa structure near the current path. Proposed device showed low leakage current of 10 nA/mm at -100 V while that of the rectangular device was 34 nA/mm at the same condition. Proposed circular AIGaN/GaN SBD showed high forward current of 88.61 mA at 3,5 V while that of the conventional device was 14.1 mA at the same condition.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.18-18
• /
• 2009

최근 다양하게 연구되고 있는 무분극(nonpolar) 갈륨질화물(GaN) 소재는 자발분극(spontaneous polarization) 및 압전분극(piezoelectric polarization) 등이 발생하지 않아 높은 내부양자효율의 확보가 가능하며, 이러한 장점을 바탕으로 고효율 특성을 갖는 발광다이오드(light-emitting diode) 및 고속 전자소자 등으로의 적용을 위한 연구가 활발히 수행 중 이다. 하지만, 무분극 GaN LED의 구현 시, GaN 박막의 비등방성 성장으로 인한 박막의 막질 저하와 함께 표면에 혼재하는 Ga층과 N층에서 기인되는 절연층의 생성으로 인한 오믹전극 형성의 어려움이 대두되고 있다. 따라서, 고효율의 무분극 GaN LED 구현을 위해서는 무분극 GaN층의 질소층 제거를 위한 표면처리 공정과 더불어 금속/무분극 GaN층 간 발생되는 쇼트키 장벽층의 높이(Schottky barrier height)를 제어하는 연구가 선행되어야 한다. 본 논문에서는 무분극 GaN LED 적용을 위한 n-형 전극물질 및 오믹조건 구현을 위한 금속/무분극 GaN층간 SBH의 제어방법에 대한 연구를 수행하였다.

• 전기학회논문지
• /
• 제61권11호
• /
• pp.1646-1649
• /
• 2012

The $O_2$ annealing technique has considerably suppressed the leakage current of GaN power devices, but this forms NiO at Ni-based Schottky contact with increasing on-resistance. The purpose of the present study was to fabricate 1.5 kV GaN Schottky barrier diodes by improving $O_2$-annealing process and GaN buffer. The proposed $O_2$ annealing performed after alloying ohmic contacts in order to avoid NiO construction. The ohmic contact resistance ($R_C$) was degraded from 0.43 to $3.42{\Omega}-mm$ after $O_2$ annealing at $800^{\circ}C$. We can decrease RC by lowering temperature of $O_2$ annealing. The isolation resistance of test structure which indicated the surface and buffer leakage current was significantly increased from $2.43{\times}10^7$ to $1.32{\times}10^{13}{\Omega}$ due to $O_2$ annealing. The improvement of isolation resistance can be caused by formation of group-III oxides on the surface. The leakage current of GaN Schottky barrier diode was also suppressed from $2.38{\times}10^{-5}$ to $1.68{\times}10^{-7}$ A/mm at -100 V by $O_2$ annealing. The GaN Schottky barrier diodes achieved the high breakdown voltage of 700, 1400, and 1530 V at the anode-cathode distance of 5, 10, and $20{\mu}m$, respectively. The optimized $O_2$ annealing and $4{\mu}m$-thick C-doped GaN buffer obtained the high breakdown voltage at short drift length. The proposed $O_2$ annealing is suitable for next-generation GaN power switches due to the simple process and the low the leakage current.

• 대한전자공학회논문지SD
• /
• 제43권5호
• /
• pp.25-33
• /
• 2006

전달 행렬 방법과 capacitance-voltage 특성, 그리고 측정된 광응답 스펙트럼을 이용하여 Schottky 다이오드 UV-A와 B 광검출기에 사용되는 GaN, $Al_{0.2}Ga_{0.8}N$ 등의 반도체 및 Schottky 접촉 금속 Ni의 물질특성인 흡수계수(absorption coefficient)를 추출하였다. 입사된 빛이 반도체의 공핍영역에서 흡수되는 양을 구하고, 이로부터 각 파장에서의 광응답 특성을 얻는 과정을 컴퓨터 프로그램으로 구현하였다. 그리고, 계산 값을 측정치와 비교하여 각 파장에서 GaN, $Al_{0.2}Ga_{0.8}N$, Ni의 흡수계수를 얻을 수 있었다. 추출된 흡수계수를 이용하여 자외선 광검출기의 광응답을 높이는 설계 방안을 모색하였다. Ni의 흡수계수가 크기 때문에 광응답을 결정하는 주요 요소는 Ni 전극의 두께이다. 따라서 Schottky 접촉 금속 Ni의 두께를 줄이고, 공핍 영역의 크기를 늘릴 수 있다면 광응답 특성이 더욱 향상된 광검출기의 실현이 가능해질 것이다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.205-208
• /
• 2001

Schottky barrier diodes are fabricated on a intrinsic GaN(4${\mu}{\textrm}{m}$) epitaxial structure grown by rf plasma molecular beam epitaxy (MBE) on sapphire substrates. First, We make Ohmic electrodes (Ti/Al/Ti/Au) by evaporator. Next, we contact RuO$_2$ by dipping in the solution (RuCl$_3$.HClO$_4$), and then we deposit Ni/Au on the surface of RuO$_2$ by evaporator. We study the electrical characteristics of GaN Schottky barrier diodes made by these methods. Measurements are C-V, I-V, SEM, EDX, and XRD for the characteristics of devices. Thickness of RuO$_2$ layer depends on supplied voltage and dipping time. Device of thinner RuO$_2$ layer have a good Schottky characteristics compare with device of thicker RuO$_2$ layer

• 센서학회지
• /
• 제10권4호
• /
• pp.207-213
• /
• 2001

A Schottky type GaN ultraviolet photodetector with a mesa structure was fabricated by depositing an Al ohmic contact on an $n^+$-GaN layer and a Pt Schottky contact on a GaN layer. The undoped GaN(0.5um)/$n^-$-GaN(0.1 um)/$n^+$-GaN(1.5 um) multi-layer structure was grown on a sapphire substrate using MOCVD. The Schottky contact properties were characterized for different passivation conditions. The leakage current of the fabricated Schottky diode was 2 nA at a reverse voltage of 5V. Plus the photocurrent was 120uA using a hydrargyrum lamp with an optical power of 1mW at a wavelength of 365 nm. The diode exhibited an ultraviolet-visible rejection ratio of $10^2$.

• 한국전기전자재료학회논문지
• /
• 제13권5호
• /
• pp.365-370
• /
• 2000

Schottky contacts on n-In$\_$0.53//Ga$\_$0.47//As have been made by metal deposition on substrates cooled to a temperature of 77K. The current-voltage and capacitance-voltage characteristics showed that the Schottky diodes formed at low temperature had a much improved barrier height compared to those formed at room temperature. The Schottky barrier height ø$\_$B/ was found to be increased from 0.2eV to 0.6eV with Ag metal. The saturation current density of the low temperature diode was about 4 orders smaller than for the room temperature diode. A current transport mechanism dominated by thermionic emission over the barrier for the low temperature diode was found from current-voltage-temperature measurement. Deep level transient spectroscopy studies exhibited a bulk electron trap at E$\_$c/-0.23eV. The low temperature process appears to reduce metal induced surface damage and may form an MIS (metal-insulator-semiconductor)-like structure at the interface.

• 센서학회지
• /
• 제14권2호
• /
• pp.96-100
• /
• 2005

The planar Schottky diodes were fabricated and modeled to probe the device applicability of the cracked GaN epitaxial layer on a (111) silicon substrate. On the unintentionally n-doped GaN grown on silicon, we deposited Ti/Al/Ni/Au as the ohmic metal and Pt as the Schottky metal. The ohmic contact achieved a minimum contact resistivity of $5.51{\times}10.5{\Omega}{\cdot}cm^{2}$ after annealing in an $N_{2}$ ambient at $700^{\circ}C$ for 30 sec. The fabricated Schottky diode exhibited the barrier height of 0.7 eV and the ideality factor was 2.4, which are significantly lower than those parameters of crack free one. But in photoresponse measurement, the diode showed the peak responsivity of 0.097 A/W at 300 nm, the cutoff at 360 nm, and UV/visible rejection ratio of about $10^{2}$. The SPICE(Simulation Program with Integrated Circuit Emphasis) simulation with a proposed model, which was composed with one Pt/GaN diode and three parasitic diodes, showed good agreement with the experiment.