• 산업경영시스템학회지
• /
• 제13권22호
• /
• pp.43-50
• /
• 1990

In conventional function analysis, the function values are evaluated by experts, which are treated as exact values. For many cases, it is often difficult to evaluate the function values of a certain subject because the criteria of evaluation are very vague. This paper presents a new function evaluation method using fuzzy set. The purpose of the method is to minimize the difference among experts by recognizing an intersection point of membership function as a representative value.

• 소음진동
• /
• 제9권1호
• /
• pp.163-173
• /
• 1999

Precise and reasonable modelling is necessary and indispensable to the analysis of dynamic characteristics of mechanical structures. Also. the effective prediction of the change of modal properties due to the variation of design parameters is required especially for the application of finite element method to the structural dynamics problems. To meet those necessity and requirement, three model updating algorithms are proposed for finite element methods. Those algorithms are based on sensitivity analysis of the modal data obtained from experimental modal analysis(EMA) and analytical modal analysis(AMA). The adapted sensitivity analysis methods of the algorithms are 1)eigensensitivity(EGNS) method. 2)frequency response function sensitivity(FRFS) method. 3)sensitivity based element-by-element method (SBEEM), Singular value decomposition(SVD) is used for performing eigenanalysis and parameter estimation in the updating process. Those algorithms are applied to finite element of a plate and the updating capability of each algorithm is compared in terms of accuracy. reliability and stability of the updating process. It is shown that the model updating method using frequency response function is superior to the other methods in view of various updating capabilities.

• 한국음향학회지
• /
• 제35권2호
• /
• pp.118-124
• /
• 2016

본 논문은 수중 방사소음 발생 시, 부분상관 함수를 이용한 기여도 분석법에 대하여 연구를 수행하였다. 부분상관 함수를 활용한 기여도 분석을 수행할 시, 입력순서의 선정은 정확한 기여도값 도출에 있어 매우 중요하다. 하지만 주파수 상관성분이 존재하는 시스템에 대하여 기여도분석을 실시할 경우, 적절한 입력순서를 선정하기가 어렵다. 이러한 문제를 해결하기 위하여 본 논문에서는 기여도특성 행렬과 다중상관 함수의 관계를 활용하여 기여도 영역을 나누어 평가하는 기여도 분석 기법을 제시하였다. 제시한 분석법의 검증을 위해 정현파로 구성된 다중입력과 단일 출력을 갖는 시스템을 모델링하였고, 이 시스템에 대하여 기여도 분석을 실시하였다. 그 결과 정확한 기여도값을 도출 할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.333-338
• /
• 2001

Fault tree is a widely used methodology for analyzing product reliability. The fault trees are usually constructed using the experiences of expert reliability engineers in top-down approaches and have different structures according to each expert's subjectivity. In this work it is tried to find a general method for the fault tree construction based on the function tree that is the result of product function deployment. Based on the function tree, the method has the advantage of resulting an objective fault tree since the faults are defined as the opposite concept of functions. The fault tree construction of this work consists of the following steps: 1) definition of product primary function with the viewpoints of product operation and configuration, 2) construction of functional relation chart using a grouping algorithm, 3) abstraction of functional block diagram according to operation sequences and configuration of a product, 4) construction of function tree for each viewpoint, and 5) construction of fault tree by matching the function tree and simplification of the result.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제14권2호
• /
• pp.93-111
• /
• 2010

The purpose of this paper is to obtain new complexity results for a second-order cone optimization (SOCO) problem. We define a proximity function for the SOCO by a kernel function. Furthermore we formulate an algorithm for a large-update primal-dual interior-point method (IPM) for the SOCO by using the proximity function and give its complexity analysis, and then we show that the new worst-case iteration bound for the IPM is $O(q\sqrt{N}(logN)^{\frac{q+1}{q}}log{\frac{N}{\epsilon})$, where $q{\geqq}1$.

• 소음진동
• /
• 제4권3호
• /
• pp.337-343
• /
• 1994

A method of the leak detection from the pipe system by using accelerometer is proposed. The signal detected from accelerometer is proved experimentally to be a dispersive wave. Based on the experiments, a method using the narrow band pass filter and the unit impulse response function is analyzed. The method uses the characteristics of the unit impulse response function, that the function is available evenin the narrow band signal because, unlike the cross correlation, it is normalized by the auto spectrum. The accelerometer is quite easier to use than the hydrophone in adapting to the pipe system.

• 대한기계학회논문집A
• /
• 제25권10호
• /
• pp.1671-1677
• /
• 2001

Cracks at mechanical fastener holes usually nucleate as elliptical comer cracks at the faying surface of the mechanical joints and grow as elliptical arc through cracks. The weight function method for elliptical arc through cracks at mechanical fastener holes has been developed and verified in the part I of this study. In part H, applying the weight function method, the effects of the amount of clearance on the mixed-mode stress intensity (actors are investigated and the change of crack shape is predicted from the analysis for various crack shapes. The stress intensity factors leer inclined crack are analyzed and critical angle at which mode I stress intensity factor becomes maximum is determined.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.495-500
• /
• 2007

A Meshfree is a method used to establish algebraic equations of system for the whole problem domain without the use of a predefined mesh for the domain discretization. A point interpolation method is based on combining radial and polynomial basis functions. Involvement of radial basis functions overcomes possible singularity. Furthermore, the interpolation function passes through all scattered points in an influence domain and thus shape functions are of delta function property. This makes the implementation of essential boundary conditions much easier than the meshfree methods based on the moving least-squares approximation. This study aims to investigate a stress analysis of structural element between a meshfree method and the finite element method. Examples on cantilever type plate and stress concentration problems show that the accuracy and convergence rate of the meshfree methods are high.

• 한국전산유체공학회지
• /
• 제17권2호
• /
• pp.28-34
• /
• 2012

In this study, the reliability-based design optimization of the airfoil was performed. PARSEC function was used to consider the uncertainty of the aerodynamic shape for the reliability-based shape optimization of airfoils. Among various reliability analysis methods, the moment method was used to compute the probability of failure of the aerodynamic performance. The accuracy of the reliability analysis was compared with other methods and it was found that the moment method predicts the probability of failure accurately. Deterministic and reliability-based optimizations were performed for the shape of the airfoil and it was demonstrated that reliability-based optimum assures the aerodynamic performances under uncertainties of the shape of the airfoil.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.195-198
• /
• 1995

Most of the theorems of nonlinear stability is based on the Lyapunov stability theory. The Lyapunov function method is the most well-known and provides precise and rigorous theoretical backgrounds. However, tile conventional approach to direct stability analysis has been performed without taking account of damping effects. For accurate stability analysis of nonlinear systems, it is required to consider the damping effects. This paper presents a new method to derive a group of Lyapunov functions to reflect the damping effects by considering the integral relationships of the system governing equations. This method tan be utilized as a powerful tool to determine the region of attraction.