Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Stress Intensity Factor Analysis of Elliptical Arc Through Cracks at Mechanical Fastener Holes by Weight Function Method (II) - Mixed-Mode Stress Intensity Factor Analysis -

가중함수법에 의한 기계적 체결홀에 존재하는 타원호형: 관통균열의 음력확대계수 해석 (II) - 혼합모드 음력확대계수 해석 -

  • Published : 2001.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

Cracks at mechanical fastener holes usually nucleate as elliptical comer cracks at the faying surface of the mechanical joints and grow as elliptical arc through cracks. The weight function method for elliptical arc through cracks at mechanical fastener holes has been developed and verified in the part I of this study. In part H, applying the weight function method, the effects of the amount of clearance on the mixed-mode stress intensity (actors are investigated and the change of crack shape is predicted from the analysis for various crack shapes. The stress intensity factors leer inclined crack are analyzed and critical angle at which mode I stress intensity factor becomes maximum is determined.

Keywords

References

  1. Fawaz, S. A., 1998, 'Application of the Virtual Crack Closure Technique to Calculate Stress Intensity Factors for Through Cracks with and Elliptical Crack Front,' Engng. Fracture Mechanics, Vol. 59, No. 3, pp. 327-342 https://doi.org/10.1016/S0013-7944(97)00126-4
  2. Fawaz, S. A., 1999, 'Stress Intensity Factor Solutions for Part-Elliptical Through Cracks,' Engng. Fracture Mechanics, Vol. 63, pp. 209-226 https://doi.org/10.1016/S0013-7944(99)00003-X
  3. Cartwright, D. J. and Parker, A. P., 1982, 'Opening Mode Stress Intensity Factor for Cracks in Pin-Loads Joints,' Int. J. of Fracture, Vol. 18, No. 1, pp. 65-78 https://doi.org/10.1007/BF00034829
  4. Ju, S. H., 1997, 'Stress Intensity Factors for Cracks in Bolted Joints,' Int. J. of Fracture, Vol. 84, pp. 129-141 https://doi.org/10.1023/A:1007357015800
  5. 허성필, 양원호, 정기현, 2000, '가중함수법에 의한 볼트 체결부 균열의 임계 경사각 결정에 관한 연구,' 대한기계학회논문집 A권, 제24권, 제9호, pp. 2344-2352
  6. 허성필, 양원호, 현철승, '가중함수법에 의한 기계적 체결부에 존재하는 타원호형 관통균열의 응력확대계수 해석(Ⅰ) - 가중함수법의 전개,' 대한기계학회논문집 A권, 제25권, 제10호, pp. 1659-1670
  7. Raju, I. S., 1986, 'Calculation of Strain-Energy Release Rates with Higher Order and Singular Finite Elements,' Engng. Fracture Mechanics, Vol. 28, No. 3, pp. 251-274 https://doi.org/10.1016/0013-7944(87)90220-7
  8. Shivakumar, K.N.;Tan, P.W.;Newman Jr., J.C. A Virtual Crack-Closure Technique for Calculating Stress Intensity Factors for Cracked Three Dimensional Bodies Int. J. of Fracture https://doi.org/10.1007/BF00035103