• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.1
• /
• pp.68-74
• /
• 1985

In this Paper, we present a non-doglegging channel routing system for If layout using standard cells. This system produces a final two-layer wiring pattern in the horizontal track between two rows, each of which is a linear placement of standard cells of identical heights, satisfying the given net list specification. The layout of CMOS cell library Including nine primitive cells used in this paper is represented in CIF (Caltech Intermediate Form) using λ(Lambda) of 2 microns in Mead-Conway layout representation scheme. The cell dimension and 1/0 characteristics such as name, position and layer type of the pins are stored in Component Library to be used in the channel routing progranl, CROUT. 4 subprogram, NET-PLOT, was used to report a schemdtic layout result, and another subprogram, NETCIF was used to with a full-fledged final layout representation in GIF, A test run for realizing a dynamicmaster-slave D flip-flop with set/reset using primitive cells was shown to take 4 CPU seconds on VAX 11/780.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.10
• /
• pp.932-935
• /
• 2015

This paper proposes a rectifier using bootstrapping and active body biasing in $0.11{\mu}m$ RF CMOS process. The proposed rectifier employs the full-wave rectifying structure with cross coupling and increases the power conversion efficiency by reducing the threshold voltage and leakage current using bootstrapping and active bias biasing. Also, it has been designed to be applied to a wide range of applications from 13.56 MHz used in wireless power transmission to 915 MHz used in RFID. As a measured result, 80 % of power conversion efficiency is obtained when the input power is 0 dBm at $10k{\Omega}$ load resistance and 13.56 MHz. Also 40 % of power conversion efficiency is shown in 915 MHz.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.465-469
• /
• 2000

This paper describes a single-chip full-custom implementation of pipelined adaptive decision-feedback equalizer (PADFE) using a 0.25-${\mu}{\textrm}{m}$ CMOS technology for wide-band wireless digital communication systems. To enhance the throughput rate of ADFE, two pipeline stage are inserted into the critical path of the ADFE by using delayed least-mean-square (DLMS) algorithm Redundant binary (RB) arithmetic is applied to all the data processing of the PADFE including filter taps and coefficient update blocks. When compared with conventional methods based on two's complement arithmetic, the proposed approach reduces arithmetic complexity, as well as results in a very simple complex-valued filter structure, thus suitable for VLSI implementation. The design parameters including pipeline stage, filter tap, coefficient and internal bit-width and equalization performance such as bit error rate (BER) and convergence speed are analyzed by algorithm-level simulation using COSSAP. The singl-chip PADFE contains about 205,000 transistors on an area of about 1.96$\times$1.35-$\textrm{mm}^2$. Simulation results show that it can safely operate with 200-MHz clock frequency at 2.5-V supply, and its estimated power dissipation is about 890-mW.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.11a
• /
• pp.141-145
• /
• 1998

This paper CMOS full adder design method based on carry-propagation-free addition trees and a circuit technique, so called multiple-valued current-mode (MVCM) circuits. The carry-paopagation-free addition method uses a redundant digit sets called redundant positive-digit number representations. The carry-propagation-free addition is by three steps, and the adder can be designed directly and efficiently from the algorithm using MVCM circuit. We demonstrate the effectiveness of the proposed method through simulation(SPICE).

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.951-954
• /
• 1999

A direct digital frequency synthesizer is designed in full custom method using 0.65${\mu}{\textrm}{m}$ CMOS n-well technology The chip provides the capability of the parallel operation using up to 4 chips with an operation frequency of 440MHz. The generated waveform can be modulated by various modulation techniques such as QPSK, 256 . 64. 32 . 16 QAM and FM.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.05a
• /
• pp.338-341
• /
• 1998

This paper presents CMOS full adder design method based on carry-propagation-free addition trees and a circuit technique, so called multiple-valued current-nude(MVCM) circuits. The carry-propagation-free addition method uses a redundant digit sets called redundant positive-digit number representations. The carry-propagation-free addition is by three steps, and the adder can be designed directly and efficiently from the algorithm using WVCM circuit, Also Multiplier can be designed by these adder. We demonstrate the effectiveness of the proposed method through simulation(SPICE).

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.779-782
• /
• 1998

This paper describes a high-speed Dual-modulus Prescaler (DMP) for RF mobile communication systems with pulse remover using selective latch technique. This circuit achieves high speed and low power consumption by reducing full speed flip-flops and using a selective latch. The proposed DMP consists of only one full speed flip-flop, a selective latch, conventional flip-flops, and a control gate. In order to ensure the timing of control signal, duty cycle problem and propagation delay must be considered. The failling edgetriggered flip-flops alleviate the duty cycle problem andthis paper shows that the propagation delay of control signal doesn't matter. The maximum operating frequency of the proposed DMP with 0.6um CMOS technology is up to 2.2㎓ at 3.3V power supply and the circuit consumes 5.24mA.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.3B
• /
• pp.362-368
• /
• 2001

본 논문에서는 두 개의 17비트 오퍼랜드를 radix-4 Booths 알고리즘을 이용하여 곱셈 연산을 수행하는 곱셈기를 설계하고 효율적인 풀커스팀 디자인에 대한 테스트 방법을 제안하였다. 클럭 속도를 빠르게 하기 위하여 2단파이프라인 구조로 설계하고 규칙적인 레이아웃을 위해 4:2 CSA(Carry Save Adder)를 사용하였다. 회로는 LG 반도체의 0.6-um 3-Metal N-well CMOS 공정을 사용하여 칩으로 제작되었다. 새로운 개념의 모듈레벨 고착 고장 모델을 제안하였고 제안한 테스트 방법을 사용하여 관찰해야 하는 노드의 수를 약 88% 줄여 효율적인 고장 시뮬레이션을 수행하였다. 설계된 곱셈기는 9115개의 트랜지스터로 구성되며 코어 부분의 레이아웃 면적은 약 1135*1545 um2 이다. 제작된 칩은 전원접압 5V에서 약 24MHz의 클럭 주파수로 동작한다.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.267-270
• /
• 2003

This paper proposes high performance $8{\times}8$ multiplier using current-mode quaternary logic technique. The multiplier is functionally partitioned into the following major sections: partial product generator block(binary-quaternary logic conversion), current-mode quaternary logic full-adder block, quaternary-binary logic conversion block. The proposed multiplier has 4.5ns of propagation delay and 6.1mW of power consumption. Also, this multiplier can easily adapted to binary system by the encoder, the decoder. This circuit is simulated under 0.35um standard CMOS technology, 5uA unit current, and 3.3V supply voltage using Hspice.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.5 s.335
• /
• pp.31-38
• /
• 2005

The architecture and the implementation details of a UTMI(USB2.0 Transceiver Macrocell Interface) compatible USB2.0 transceiver chip were presented. To confirm the validation of the incoming data in noisy channel environment, a squelch state detector and a current mode Schmitt-trigger circuit were proposed. A current mode output driver to transmit 480Mbps data on the USB cable was designed and an on-die termination(ODT) which is controlled by a replica bias circuit was presented. In the USB system using plesiochronous clocking, to compensate for the frequency difference between a transmitter and a receiver, a synchronizer using clock data recovery circuit and FIFO was designed. The USB cable was modeled as the lossy transmission line model(W model) for circuit simulation by using a network analyzer measurements. The USB2.0 PHY chip was implemented by using 0.25um CMOS process and test results were presented. The core area excluding the IO pads was $0.91{\times}1.82mm^2$. The power consumptions at the supply voltage of 2.5V were 245mW and 150mW for high-speed and full-speed operations, respectively.