• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.385-387
• /
• 1997

This paper deals with the relationships between discharge current wave form and the structure of AC PDP cells. The Paschen minimum can be found in the range of $200{\sim}300\;torr$ under the condition of electrode width of $300{\mu}m$ and $100{\mu}m$ electrode gap. Furthermore, the charge current does not vary with the gas pressure, whereas the time delay in the discharge inception voltage decreased both peak and r.m.s discharge current increase with gas pressure and electrode width.

• Journal of Power Electronics
• /
• v.14 no.4
• /
• pp.649-660
• /
• 2014

A novel non-isolated bidirectional soft-switching SEPIC/ZETA converter with reduced ripple currents is proposed and characterized in this study. Two auxiliary switches and an inductor are added to the original bidirectional SEPIC/ZETA components to form a new direct power delivery path between input and output. The proposed converter can be operated in the forward SEPIC and reverse ZETA modes with reduced ripple currents and increased voltage gains attributed to the optimized selection of duty ratios. All switches in the proposed converter can be operated at zero-current-switching turn-on and/or turn-off through soft current commutation. Therefore, the switching and conduction losses of the proposed converter are considerably reduced compared with those of conventional bidirectional SEPIC/ZETA converters. The operation principles and characteristics of the proposed converter are analyzed in detail and verified by the simulation and experimental results.

• ETRI Journal
• /
• v.32 no.2
• /
• pp.327-329
• /
• 2010

A fully integrated small form-factor HBT power amplifier (PA) was developed for UMTS Tx applications. For practical use, the PA was implemented with a well configured bottom dimension, and a CMOS control IC was added to enable/disable the HBT PA. By using helix-on-pad integrated passive device output matching, a chip-stacking technique in the assembly of the CMOS IC, and embedding of the bulky inductive lines in a multilayer substrate, the module size was greatly reduced to 2 mm ${\times}$ 2.2 mm. A stage-bypass technique was used to enhance the efficiency of the PA. The PA showed a low idle current of about 20 mA and a PAE of about15% at an output power of 16 dBm, while showing good linearity over the entire operating power range.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.748-751
• /
• 2000

in this paper the design procedure of three phase voltage source inverter output filter is described. The 'd' axis transfer function of the filter output voltage to the load current is described with the capacitor value and the system time constant including the controller. This means that the relation between the filter capacitor value and the system time constant is given as the closed form. By using the above closed form the capacitor value can be calculated with the system time constant is given as the closed,. form the capacitor value can be calculated with the system time constant which can be implemented practically not using the try and error method. And as the effect of the load is connected.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.5
• /
• pp.137-144
• /
• 1998

A mathematical model for investigating the form generation mechanism in the centerless thrufeed grinding process is described. The length of the contact line and the magnitude of the grinding force between the grinding wheel and workpieces vary with the change of the axial location of the current workpiece during grinding. Thus, a new coordinate system and a grinding force curve of previous and/or following workpieces are introduced to treat the axial motion. Experiments and computer simulations were carried out using three types of cylindrical workpiece shapes. To validate this model. simulation results are compared with the experimental results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.411-417
• /
• 2013

The moment responses of electric pole foundations for a railroad were investigated using real-scale load tests. Large overturning moments were applied to two square rigid piles with a 1.1 m width and a 2.2 m embedded depth. Two different installation methods-with and without a form-were applied to evaluate the influence of the form work on the moment capacities of the foundations. The reduction of ground strength caused by the excavation without a form is more pronounce than the decrease of frictional strength due to the smooth concrete surface with a form. From the test results, it is found that the current design method which applies a proportional coefficient to consider the effect of a form work is not appropriate. When the normal and frictional stressed is considered separately, the effect of a form work can be estimated reasonably by reducing the friction angle between soil and foundation by 20%.

• The Journal of the Korean dental association
• /
• v.52 no.9
• /
• pp.541-549
• /
• 2014

The restorative treatment using titanium implants has become a standard procedures in everyday clinical practice. However, there are several concerns about the use of titanium as a materials. Above all, the grayish metal color provokes esthetic problems when the soft tissue around the implants is not optimal. Recently, zirconia has been emerging as an alternative to titanium due to its white color and superior physicochemical properties. In this paper, the current findings about zirconia implants was reviewed based on the results from animal and clinical experiments. In addition, the immediate implantation protocols using the natural tooth form zirconia implants was introduced as a novel procedures and future perspectives were discussed.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.1976-1978
• /
• 2001

In this paper, a new robust deadbeat minimax FIR filter (DMFF) is proposed for continuous-time state space signal models. Linearity, deadbeat property, FIR structure, and independence of the initial state information will be required in advance, in addition to a performance index of the worst case gain between the disturbance and the current estimation error. The proposed DMFF is obtained by directly minimizing a performance index with the deadbeat constraint. The proposed DMFF is represented first in a standard FIR form and then in an iterative form. The DMFF will be shown to be used also for the IIR structure. It is shown that the DMFF is similar in form to the existing receding horizon unbiased FIR filter (RHUFF) with some noise covariances. The former is a deterministic filter, while the latter is a stochastic filter.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1431-1436
• /
• 2004

In this paper, measuring programs for EMC type tests in the railway environments were designed and developed the train harmonic current in ATP frequency band and psophometric current using PXI components and LabVIEW software form National Instruments. As real time applications for EMC tests, harmonic current and psophometric current results of the train were also presented. This new measuring programs for EMC tests in the train are expected to increase test reliability and real-time performance.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.45.5-45
• /
• 2002

In this paper, a quasi-deadbeat minimax estimation (QME) is proposed as a new class of time-domain parameter estimations for deterministic generic linear models. Linearity, quasi-deadbeat property, FIR structure, and independency of the initial parameter information will be required in advance, in addition to a new performance criterion of a worst case gain between the disturbances and the current estimation error. The proposed QME is obtained in a closed form by directly solving an optimization problem. The QME is represented in both a batch form and an iterative form. A fast algorithm for the suggested estimation is also presented, which is remarkable in view...