• 한국철도학회논문집
• /
• 제9권6호
• /
• pp.792-797
• /
• 2006

In general, the Maglev vehicle is ran over the elevated guideway consisted of steel or concrete structure. Since the running behaviour of the vehicle is affected by the flexibility of the guideway, the consideration of the flexibility of guideway is needed for evaluation of dynamics of both the vehicle and guideway. A new technique based on flexible multibody dynamics is proposed to model the Maglev vehicle, levitation controller, and guideway into a coupled model. To verify the technique, an urban Maglev vehicle is analyzed using the technique and discussions are carried out.

• 대한기계학회논문집A
• /
• 제21권8호
• /
• pp.1311-1321
• /
• 1997

In multibody dynamics, differential and algebraic equations which can satisfy both equation of motion and kinematic constraint equation should be solved. To solve these equations, coordinate partitioning method and constraint stabilization method are commonly used. In the coordinate partitioning method, the coordinates are divided into independent and dependent and coordinates. The most typical coordinate partitioning method are LU decomposition, QR decomposition, and SVD (singular value decomposition). The objective of this research is to find an efficient coordinate partitioning method in the dynamic analysis of flexible multibody systems. Comparing two coordinate partitioning methods, i.e. LU and QR decomposition in the flexible multibody systems, a new hybrid coordinate partitioning method is suggested for the flexible multibody analysis.

• 대한기계학회논문집A
• /
• 제26권2호
• /
• pp.267-274
• /
• 2002

Using a flexible rotating beam test bed, experimental verification of a flexible multibody dynamic simulations for a rotating beam model has been carried out. The test bed consists of a flexible arm, harmonic driver reducer, AC servo motor and DSP board with PC. The mechanical ports of the test bed has been designed using 3D CAD program. For the simulation model, mass and moment of inertia of each part of the flexible rotating beam test bed are also obtained from 3D CAD model. In the flexible multibody dynamic simulations, the substructuring model has been established to capture nonlinear effects of the flexible rotating beam. Through the experimental verification, substructuring model provides better results than those from the linear model in the high speed rotation.

• 대한기계학회논문집A
• /
• 제41권6호
• /
• pp.507-515
• /
• 2017

많은 절점 자유도로 표현이 되는 유연다물체 시스템의 효율적인 해석을 위해서는 병렬처리 기법이 적용될 수 있다. 이 분야에서의 병렬처리기법은 주로 선형대수방정식의 효율적인 해법에 초점이 맞추어 연구가 진행되었다. 본 논문에서는 기존의 방법과는 달리 병렬처리에 적합한 유연다물체 동역학 공식을 부분 시스템 합성방법을 이용하여 개발하고, OpenMP를 사용한 효율적인 병렬처리 방식을 제안하였다. 서로 다른 두 가지 병렬처리 방식을 3개의 동일한 유연체 회전 날개 시스템 시뮬레이션 통하여 비교하였다. 또한 실제의 CPU시간을 비교하여 제안한 병렬처리 방법의 효율성을 고찰하였다.

• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.101-109
• /
• 1997

A tool for the dynamic simulation and design technique of the excavator plays an important role in the prediction of dynamic behavior of the excavator in the initial design stage. In this paper, a flexible multibody dynamic analysis model including track of the crawler type excavator is developed using DADS and ANSYS. Through the driving simulation of the excavator travelling over rough road track, frequency characteristics of the upper frame and cabin are obtained, and the reaction forces acting on the track rollers are also presented for the fatigue life estimation. The effect of boom vibration modes on the joint reaction forces and accelerations is presented from the swing simulation.

• Journal of Mechanical Science and Technology
• /
• 제15권6호
• /
• pp.693-698
• /
• 2001

The analysis of actuating forces (or torques) and joint reaction forces (or moments) are essential to determine the capacity of actuators, to control the system and to design the components. This paper presents an inverse dynamic analysis algorithm for flexible multibody systems with closed-loops in the relative joint coordinate space. The joint reaction forces are analyzed in Cartesian coordinate space using the inverse velocity transformation technique. The joint coordinates and the deformation modal coordinates are used as the generalized coordinates of a flexible multibody system. The algorithm is verified through the analysis of a slider-crank mechanism.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.422-427
• /
• 2001

The component mode synthesis method allows the elastic deformation of each component in the flexible multibody system by a sum of modes and modal coordinates. This paper focuses on the selection of boundary conditions and deformation modes for redundantly constrained flexible components in mechanical system dynamics. The result of a flexible body dynamic analysis with only normal modes is used to identify proper boundary conditions of a static modes and a desired set of static modes which will be used in the final model. A simple four bar mechanism is used to explain the procedure and a space satellite with solar panels is analyzed using the proposed method.

• 대한기계학회논문집A
• /
• 제29권8호
• /
• pp.1123-1131
• /
• 2005

In this paper, a formulation for a spatial sliding joint, which a general multibody can move along a very flexible cable, is derived using absolute nodal coordinates and non-generalized coordinate. The large deformable motion of a spatial cable is presented using absolute nodal coordinate formulation, which is based on the finite element procedures and the general continuum mechanics theory to represent the elastic forces. And the non-generalized coordinate, which is neither related to the inertia forces nor external forces, is used to describe an arbitrary position along the centerline of a very flexible cable. In the constraint equation for the sliding joint, since three constraint equations are imposed and one non-generalized coordinate is introduced, one constraint equation is systematically eliminated. Therefore, there are two independent Lagrange multipliers in the final system equations of motion associated with the sliding joint. The development of this sliding joint is important to analyze many mechanical systems such as pulley systems and pantograph/catenary systems for high speed-trains.

• 한국소음진동공학회논문집
• /
• 제14권2호
• /
• pp.150-156
• /
• 2004

In this paper, the dynamic behavior of a very flexible cable due to moving multibody system along its length is presented. The very deformable motion of a cable is presented using absolute nodal coordinate formulation, which is based on the finite element procedures and the general continuum mechanics theory to represent the elastic forces. Formulation for the sliding joint between a very flexible beam and a rigid body is derived. In order to formulate the constraint equations of this joint, a non-generalized coordinate, which has no inertia or forces associated with this coordinate, is used. The modeling of this sliding joint is very important to many mechanical applications such as the ski lifts. cable cars, and pulley systems. A multibody system moves along an elastic cable using this sliding joint. A numerical example is shownusing the developed analysis program for flexible multibody systems that include a large deformable cable.

• Journal of Mechanical Science and Technology
• /
• 제19권spc1호
• /
• pp.328-335
• /
• 2005

For high speed railway vehicles, we consider a vibration of flexible track/wheel system. It is very important to deal with the complex phenomena of high-speed vehicles that can be occurred in the vertical vibration of the system. From a viewpoint of multibody dynamics, this kind of problem needs accurate analysis because the system includes mutual dynamic behaviors of rigid body and flexible body. The simulation technique for the complex problems is also discussed. We consider the high-speed translation, rail elasticity, elastic supports under the rail and contact rigidity. Eigen value analysis is also completed to verify the mechanism of the coupled vertical vibration of the system.