• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.206-209
• /
• 2002

With the progress of semiconductor processing technology, avalanohe photodiodes (APDs) based on InP/InGaAs are used for high-speed optical receiver modules. Planar-type APDs give higher reliability than mesa-type APDs. However, Planar-type APDs are struggled with a problem of intensed electric field at the junction curvature, which causes edge breakdown phenomena at the junction periphery. In this paper, we focused on studying the effects of junction curvature for APDs performances by different etching processes followed by single diffusion to from p-n junction. The performance of each process is characterized by observing electric field profiles and carrier generation rates. From the results, it can be understood to predict the optimum structure, which can minimize edge breakdown and improve the manufacturability.

• Bulletin of the Korean Mathematical Society
• /
• v.52 no.6
• /
• pp.2011-2023
• /
• 2015

This paper determines the structures of one-homogeneous weight codes over finite chain rings and studies the algebraic properties of these codes. We present explicit constructions of one-homogeneous weight codes over finite chain rings. By taking advantage of the distance-preserving Gray map defined in [7] from the finite chain ring to its residue field, we obtain a family of optimal one-Hamming weight codes over the residue field. Further, we propose a generalized method that also includes the examples of optimal codes obtained by Shi et al. in [17].

• 전기의세계
• /
• v.22 no.3
• /
• pp.25-34
• /
• 1973

In this paper, the characteristics of a single phase induction motor which is considered the space harmonic flux by the double revolving field theory is analysed. As the rotor resistance for the fundamental flux is separated from the resistance for the rotor bar and end-ring, and the rotor leakage reactnace is separated from the skew leakage reactance and the other, so the circuit constants for the space harmonic flux is expressed by the circuit constants for the fundamentals. As the ratio of the circuit constants for the magnetizing reactance is used, the generalized equivalent circuit is made up. the characteristic equation which is able to analysis the subdivided characteristics by the above circuit is induced. The ratio of the circuit constants and the skew angle being changed, the variations of the torque-speed characteristics for the fundamentals and harmonics is examined by this equation.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2292-2294
• /
• 2002

This paper presents the network of Distributed Control System(DCS) considering specification of nuclear power plant. The network is composed of field network, control network and information network. The protocol of control network is ring type and it is compared to ethernet type. This paper proposes the structure of DCS, the protocol of each network and analyzes the network traffic along data capacity of field network, control network, information network and the network performance. Network II.5 is used as traffic simulation tool.

• Korean Journal of Optics and Photonics
• /
• v.2 no.1
• /
• pp.1-6
• /
• 1991

This paper describes the theoretical analysis of a diffraction pattern analyzer for the characterization of microscale object fields and a method for obtaining size and size distribution from the measured diffraction pattern of the object fields. For the experimental verification, a typical optical Fourier transform system was set up and calibrated with 2 5$\mu \textrm m$ and 50$\mu \textrm m$ pinholes. The system responses to distilled water droplets, alcohol, glycerin and silicon oil were imaged with vidicon, and the image was processed to determine the size distribution of each liquid particle field. The energy distribution function which is defined as the total intensity of a circular ring in the diffraction pattern was used to determine the dominant particle size of each liquid particle field.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.159-161
• /
• 1997

This paper presents a method of reducing cogging torque and improving average torque by changing the dead zone angle of trapezoidal magnetization distribution of rotor magnet in ring type. Because brushless d.c. motor has 3D shape of overhang, 3D analysis should be used for computation of its magnet field. In this paper, Three Dimensional Equivalent Magnetic Circuit Network method (3DEMCN) which can calculate an accurate 3D magnetic field has been introduced. The method has an advantage that nonlinear magnetic phenomena can be considered and the cogging torque analyses requesting the rotation of the rotor can be performed by the variation of magnetization distribution without remesh.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.44 no.4
• /
• pp.490-495
• /
• 1995

A bipolar junction transistor which exihibits 1000V breakdown voltage is designed and fabricated using FLR (Field Limiting Rings). Three dimensional effects on the breakdown voltage is investigated in the cylindrical coordinate and the simulation results are compared with the results in the rectangular coordinate. Breakdown voltage of the device with 3 FLR is simulated to be 1420V in the cylindrical coordinate while it is 1580V in rectangular coordinate. Bipolar junction transistor has been fabricated using the epitaxial wafer of which resistivity is 86 .OMEGA.cm and thickness is 105 .mu.m. Si$_{3}$N$_{4}$ and glass are employed for the passivation. Breakdown of the fabricated device is measured to be 1442V which shows better greement with the simulation results in cylindrical coordination.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.35-37
• /
• 2009

This paper deals with the static analysis on the permanent magnet synchronous motors(PMSM) using transfer relation theorem according to the shaft materials, and adopts the analytical method to predict the magnetic field distribution and to calculate the electrical parameters by using Transfer Relation Theorem(TRT) in terms of 2-D model in polar coordinates system. In addition, the three types of PMSMS with different types of shafts, which are Iron cored, Air cored, Full-ring permanent magnet type shaft, are suggested in this research, and with those models, not only the analysis on the magnetic field distribution, the estimation of electrical parameters, but also their comparison with Finite Element Analysis(FEA) is processed.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.12
• /
• pp.1112-1117
• /
• 1996

The electronic structures of twenty-seven isomers of a macrocyclic fulleropyrrolidine are investigated with semi-empirical extended Huckel (EH) molecular orbital method. The geometry of each isomer is determined by the molecular mechanics and dynamics methods based on UFF (universal force field) empirical force field. The calculated geometries, such as the carbon-carbon distances of the fullerene moiety, are in good agreement with those of related fullerene derivatives. The EH calculation shows that the formation of macrocyclic pyrrolidine ring on fullerene moiety results in the reduction of the HOMO-LUMO energy gap. From the graphical analysis of the DOS (density of states), PDOS (projected DOS), and MOOP (molecular orbital overlap population) curves, we can find that this reduction is due to splitting of the HOMO of fullerene moiety, which results from the symmetry-breaking and the distortion of the buckminsterfullerene framework from its ideal icosahedral structure.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.941-946
• /
• 2008

D&B method in tunnel construction requires accurate and rapid measurement of the ground movement, which of essential for feedback analysis. Recently, survey technique adapting IT is getting more and more emphasized in the field of construction and tunnel survey also follow the same trend. Case study and adaptability of IT technique for tunnel survey will be discussed in this study. The application of laserscannig method in the field of tunnel construction was reported in several advanced country including Austria and Japan. Survey for the crown and shoulder movements by IT survey method was conducted and the results were compared to those do the conventional method. The pipe-roof, grouting, ring-cut are installed in the this site to prevent expected large ground settlement. The result show that laserscanner system is prefered rather than conventional method in that better understanding for the displacement condition and origin condition was liable by the lasersacnnig method. IT survey solution makes if possible to execute more economic and safe construction.