• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.4
• /
• pp.612-619
• /
• 1990

In this paper, a design method of optical FSK transmitter is described using LD-FM circuit model. In the design of optical FSK transmitter, an optimum bias current was chosen using LD-FM circuit model, and an unequalized FM transfer function was determined at this current. The equalizers that can make this transfer function uniform were designed by use of a simple passive network. For the designed optical FSK transmitter, the pulse-transient and small-signal frequency-deviation responses were simulated and discussed.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.10
• /
• pp.806-813
• /
• 1991

In this paper, we suggested the diagnosis of the optical FSK transmitter output characteristics using the Micheloson interferometer. The transmitter is designed by the direct frequency modulation effect of a semoconductor laser diode. The optical FSK transmitter consists of a temperature stabilized semiconductor laser diode and an optimally designed equalizer. It is modulated by 100Mbit/s PRBS Generator to diagonosis of Optical FSK transmitter output characteristics. The Michelson Interferometer is used for the optical frequency discriminator which transforms the output frequency of the transmitter to the amplitude of light. The measurement of the performance of the transmitter to the amplitude of light. The measurement of the performance of the transmitter computer the transmitted data and their eye pattern with the simulation results, the received data and their eye pattern. As the result of experiment, the data transfer rate of the transmitters is 100Mbit/s.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1134-1136
• /
• 2002

This paper proposes a FSK(Frequency Shift Keying) transmitter which has a inverter for power amplification instead of linear amplifier. As it can generate large signal using resonant circuit under the low voltage source even if the impedance of antenna is large as like a loop antenna of TWC(Train to Way-side Communication) system. In this paper, the proposed fully digital controlled transmitter including FSK modulation is presented and its control schemes are discussed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.9
• /
• pp.936-943
• /
• 2003

The miniaturized wireless endoscope consists of CMOS Image sensor, FPGA, LED, Battery, DC to DC Converter, Antenna and Transmitter. FSK transmitter is designed and fabricated with 10 mm(diameter)${\times}$23 mm(thickness) dimension considering the maximum permission exposure(MPE), system size, power consumption, linearity and modulation method. Experimental results is - 3.67 dBm output power level, 20 MHz frequency deviation, and - 99 dBc/Hz(@100 kHz offset) phase noise at 1.2 GHz. From the in-vivo experiment, the designed FSK transmitter has a acceptable capability for wireless endoscope.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.4
• /
• pp.272-281
• /
• 2013

This paper presents low power frequency shift keying (FSK) transmitter using all digital PLL (ADPLL) for smart utility network (SUN). In order to operate at low-power and to integrate a small die area, the ADPLL is adopted in transmitter. The phase noise of the ADPLL is improved by using a fine resolution time to digital converter (TDC) and digitally controlled oscillator (DCO). The FSK transmitter is implemented in $0.18{\mu}m$ 1-poly 6-metal CMOS technology. The die area of the transmitter including ADPLL is $3.5mm^2$. The power consumption of the ADPLL is 12.43 mW. And, the power consumptions of the transmitter are 35.36 mW and 65.57 mW when the output power levels are -1.6 dBm and +12 dBm, respectively. Both of them are supplied by 1.8 V voltage source. The frequency resolution of the TDC is 2.7 ps. The effective DCO frequency resolution with the differential MOS varactor and sigma-delta modulator is 2.5 Hz. The phase noise of the ADPLL output at 1.8 GHz is -121.17 dBc/Hz with a 1 MHz offset.

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.06a
• /
• pp.121-125
• /
• 1991

A basic coherent optical transmission was demonstrated using FSK modulation and heterodyne detection scheme. Optical frequency of DFB LD light source at the transmitter side was stabilized with Fabry Perot etalon and bias feedback circuit. A tunable external cavity LD was used as a local oscillator at the receiver. Heterodyned output signal at IF frequency of 2GHz was measured and discussed.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.16 no.1
• /
• pp.14-21
• /
• 1979

This paper deals with tIne interface error in the on-line computer systems by using the FSK radio communications. The wideband frequency shrift keying method is used for briary data transmission between the remote terminals and the main computer. To mintmize the error rate In the decoder systems of the main computer, a synchronizing pulse is added to the frame, so that the phase In both receiver and transmitter are synchronized. When the information signal with a constant error bit is received through FSK, It is designed to use the microprocessor for calculation of error bit. As results, most bit error are caused in FSK radio communications. and a few error bit Is me - asured to enter the mirroprocessor from the input buffer.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.4 s.334
• /
• pp.1-6
• /
• 2005

For the low power and low cost transceivers, direct sequence spread spec01m frequency-shift keying (DSSS-FSK) is proposed. A transmitter of the DSSS-FSK signal can be implemented by a simple direct modulation using the phase locked loop. Since the DSSS-FSK signal has negligible power around the carrier frequency, low cost direct conversion receiver can be used. Optimum coherent and semi-coherent correlation detection methods for the DSSS-FSK signal are proposed and analyzed. Segmented semi-coherent correlation detection method is proposed to improve the bit error rate performance in the large carrier frequency offset.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.1
• /
• pp.80-86
• /
• 2010

This paper describes the development result of S-band Transmitter of STSAT-3 by satellite research center(SaTReC), KAIST. STSAT-3 has two kinds of communication channels, S- band for Telemetry & Command and X-band for mission payload. S-band Transmiiter(STX) consist of modulator, frequency synthesizer, power amp and DC/DC converter. The modulation scheme of STX is FSK(Frequency Shift Keying). The interface between spacecraft OBC and STX is RS-422. The STX is based on modular design. The RF output power of STX is 1.5W(31.7dBm) and BER of STX is under 1E-5. The Test of STX is completed successfully such as functional Test and environmental(vibration, thermal vacuum) Test.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.471-476
• /
• 1996

In this study, the method to use the phase shift keying (PSK) communication technique in smart transmitter is presented. In nuclear applications. smart transmitters for various parameters are expected to improve the accuracy of measurement and to reduce the load of calibration work. The capability of communication in field level is the most important merit of the smart transmitter. The most popular method is using of digital and analog techniques simultaneously - transmitting measurements from the field at 4∼20mA while modulating the current to carry digital information in both directions over the same twisted pairs. Conventional smart transmitters use the frequency shift keying (FSK) method for digital communication. Generally, however, the FSK method has the speed limit at 1200 bps. Amount of information to transmit becomes increasing as the processing technique is improved. The PSK method is noticeable alternative for high speed digital communication, but it has non-zero DC component. In order to use the PSK method in the field transmission with smart transmitter, the method to remove the DC component is studied in this work.