• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.279-282
• /
• 2012

In this paper, a hardware architecture of phase calculator for 3D image processing is proposed. The designed phase calculator, which adopts a pipelined architecture to improve throughput, performs arctangent operation using vectoring mode of CORDIC algorithm. Fixed-point MATLAB modeling and simulations are carried out to determine the optimized bit-widths and number of iteration. Phase calculator designed in Verilog HDL is verified by emulating the restoration of virtual 3D data using MATLAB/Simulink and FPGA-in-the-loop verification.

• Journal of IKEEE
• /
• v.21 no.4
• /
• pp.388-396
• /
• 2017

Since there are many variables such as various poses, illuminations and occlusions in a face detection problem, a high performance detection system is required. Although CNN is excellent in image classification, CNN operatioin requires high-performance hardware resources. But low cost low power environments are essential for small and mobile systems. So in this paper, the CPU-FPGA integrated system is designed based on 3-stage cascade CNN architecture using small size FPGA. Adaptive Region of Interest (ROI) is applied to reduce the number of CNN operations using face information of the previous frame. We use a Field Programmable Gate Array(FPGA) to accelerate the CNN computations. The accelerator reads multiple featuremap at once on the FPGA and performs a Multiply-Accumulate (MAC) operation in parallel for convolution operation. The system is implemented on Altera Cyclone V FPGA in which ARM Cortex A-9 and on-chip SRAM are embedded. The system runs at 30FPS with HD resolution input images. The CPU-FPGA integrated system showed 8.5 times of the power efficiency compared to systems using CPU only.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.12
• /
• pp.4648-4663
• /
• 2020

This paper proposes the Lempel-Ziv 4(LZ4) compression accelerator optimized for scale-out servers in data centers. In order to reduce CPU loads caused by compression, we propose an accelerator solution and implement the accelerator on an Field Programmable Gate Array(FPGA) as heterogeneous computing. The LZ4 compression hardware accelerator is a fully pipelined architecture and applies 16 dictionaries to enhance the parallelism for high throughput compressor. Our hardware accelerator is based on the 20-stage pipeline and dictionary architecture, highly customized to LZ4 compression algorithm and parallel hardware implementation. Proposing dictionary architecture allows achieving high throughput by comparing input sequences in multiple dictionaries simultaneously compared to a single dictionary. The experimental results provide the high throughput with intensively optimized in the FPGA. Additionally, we compare our implementation to CPU implementation results of LZ4 to provide insights on FPGA-based data centers. The proposed accelerator achieves the compression throughput of 639MB/s with fine parallelism to be deployed into scale-out servers. This approach enables the low power Intel Atom processor to realize the Hadoop storage along with the compression accelerator.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3C
• /
• pp.306-313
• /
• 2007

In this paper, we efficiently implemented turbo code algorithm in FPGA H/W(hardware) resource. The used turbo code algorithm has the characteristics; the size of constraint is 3, encoder type is 1/3, the size of random interleaver is 2048. The proposed H/W consists of MAP block for calculating alpha and delta using delta value, storing buffer for each value, multiplier for calculating lamda, and lamda buffer. The proposed algorithm and H/W architecture was verified by C++ language and was designed by VHDL. Finally the designed H/W was programmed into FPGA and tested in wireless communication environment for field availability. The target FPGA of the implemented H/W is VERTEX4 XC4VFX12-12-SF363 and it is stably operated in 131.533MHz clock frequency (7.603ns).

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.4
• /
• pp.43-49
• /
• 2021

A small infrared image homing system is a tracking system that has an infrared image sensor that identifies a target through the day and night infrared image processing of the target on the ground and searches for and detects the target with respect to the main target. This paper describes the development of a board equipped with a high-speed CPU and FPGA (Field Programmable Gate Array) to identify target through real-time image processing by acquiring target information through infrared image. We propose a CPU-FPGA combining architecture for CPU and FPGA selection and video signal processing, and also describe a controller design using FPGA to control infrared sensor.

• Journal of the Korea Society for Simulation
• /
• v.25 no.4
• /
• pp.43-52
• /
• 2016

Wireless sensor network (WSN) technology has been implemented using commercial off-the-shelf microcontrollers (MCUs), In this paper, we propose a simulation environment to realize the physical evaluation of FPGA-based node by considering vertically cross-layered WSN in terms of physical node device and network interconnection perspective. The proposed simulation framework emulates the physical FPGA-based sensor nodes to interoperate with the NS3 through the runtime infrastructure (RTI). For the emulation and interoperation of FPGA-based nodes, we extend a vendor-providing FPGA design tool from the host computer and a script to execute the interoperation procedures. The standalone NS-3 is also revised to perform interoperation through the RTI. To resolve the different time-advance mechanisms between the FPGA emulation and event-driven NS3 simulation, the pre-simulation technique is applied to the proposed environment. The proposed environment is applied to IEEE 802.15.4-based low-rate, wireless personal area network communication.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2267-2270
• /
• 2003

This paper has been studied to implement MQ encoder in JPEG2000 on FPGA. In the JPEG2000 architecture, Each of coding passes collects contextual information about the bit-plane data. An MQ coder uses contextual information and its internal state to decode a compressed bit-stream. This paper draws up JPEG2000 Standard Part 1: FCD 15444-1 It is simulated with Modelsim and tested with JBIG2 data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.8
• /
• pp.1895-1900
• /
• 2010

In this paper, we propose the hardware architecture of a display converter which is consisted of four functional blocks. The four functional blocks consists of a set of color space converter, de-interacer, video display scaler, and gamma corrector. After the proposed architecture was implemented into hardware, we verified that it operated exactly. The designed hardware has 7,629 LUT and 6,800 Logic Register in Stratix device of Altera and operates in 270 MHz clock frequency.

• Journal of the Korea Computer Graphics Society
• /
• v.23 no.3
• /
• pp.55-64
• /
• 2017

In this paper, a novel soft shadow method is suggested to support realistic shadows in mobile ray tracing. In ray tracing, soft shadow is generally generated by sampling a shadow ray. As this sampling method increases the number of rays to be processed, it has undermined the performance. We designed the proposed soft shadow processing method and hardware architecture to overcome this problem through selective shadow generation and triangle address caching for minimizing the performance degradation caused by sampling. The proposed hardware architecture can be integrated into a mobile ray-tracing hardware and was evaluated in terms of its performance on the FPGA. Based on the results, the rendering performance about 4, 8, and 16 samples were improved, respectively, by 40%, 50%, and 56% on average compared to the previous method, and it was found that the real-time soft shadow processing is feasible with the proposed hardware architecture.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.11
• /
• pp.63-69
• /
• 1995

A novel programming architecture for antifuse FPGA(Field Programmable Gate Array) is described. This architecture prevents programming transistors from breakdown which occurs due to high voltage across the transistors during antifuse programming. Extra mask and processes can be avoided using this proposed architecture. To reduce the applied voltage across the terminals of programming transistors, different voltage ranges are supplied to vertical and horizontal tracks; between programming voltage Vp and Vp/2 for vertical tracks and between Vp/2 and 0V for horizontal tracks. Therefore, Maximum voltage across the programming transistors is half of the programming voltage and an designated antifuse can be programmed by applying maximum voltage for vertical track and minimum voltage for horizontal track while others are subjected to voltage difference below Vp/2.