• Food Science and Preservation
• /
• v.13 no.2
• /
• pp.131-137
• /
• 2006

In order to reduce the damage of effective component during processing, we carried out hot-water extraction monitering in Gastrodia elata Blume by response surface methodology. The extraction con야tions for vanillyl alcohol, vanillin and coumarin were optimized at 91.07, 93.73 and $96.30^{\circ}C$, for 2.64, 2.58 and 3.84 hr, at the concentration of 15.16, 21.56 and 19.88 mL/g, respectively. The optimal condition for extraction of total phenolics was acheved at $98.14^{\circ}C$, 3.20 hr and 18.63 mL/g. This study elicited regression formula for each variable, and superimposed the total optimal conditions of extraction for effective compounds and optimal condition for antioxidant characteristics dividing processing factors. It is shown that the predicted result under the extraction condition as follows: extraction temperature for $90{\sim}100^{\circ}C$, extraction time for $3{\sim}4hr$, and solvent volume of $15{\sim}20mL/g$ of sample.

• Journal of Soil and Groundwater Environment
• /
• v.23 no.2
• /
• pp.15-22
• /
• 2018

Aqua regia extraction for the quantification of heavy metals and As in contaminated soils was investigated as one of preliminary steps for on-site monitoring using sensor technology. Soil samples were taken from closed railway depot, closed mines, and closed refinery and various extraction conditions including $30^{\circ}C/15min$, $30^{\circ}C/30min$, $30^{\circ}C/60min$, $30^{\circ}C/120min$, $80^{\circ}C/15min$, $80^{\circ}C/30min$, $80^{\circ}C/60min$, $80^{\circ}C/120min$ were tested. The optimal extraction condition was determined as $80^{\circ}C/60min$ because the extraction efficiencies of Zn were relatively low and did not reach the targeted level (80-100% of original concentrations) for $30^{\circ}C$ conditions. It was found that the fractionation of heavy metals and As using the sequential extraction method was useful to understand the degree of metal extraction. In order to enhance the extraction efficiency within short extraction time, ultrasound technology using a 20 kHz horn-type sonicator was additionally used for $30^{\circ}C/15min$. It was revealed that ultrasound could significantly enhance the extraction efficiency and pulsed irradiation showed higher efficiency than continuous irradiation due to the less formation of bubble clouds. However high temperature condition ($80^{\circ}C$) was required to achieve high extraction efficiency for Zn in spite of the use of ultrasound.

• Korean Journal of Pharmacognosy
• /
• v.53 no.4
• /
• pp.202-206
• /
• 2022

Salidroside is a major phenolic glycoside of Acer tegmentosum (Aceraceae) and known to be a hepatoprotective compound. Extraction conditions are one of the most important factors to save time and cost from an economic point of view. For this reason, this study was conducted to optimize the extraction condition for maximum yield of salidroside. For optimization, three extraction factors such as ethanol concentration (%), extraction temperature (℃), and solvent to material ratio (mg/mL) were tested and optimized for maximum yield of salidroside using response surface methodology (RSM). The optimal condition was obtained as an ethanol concentration of 53.4%, an extraction temperature at 67.11℃ and a solvent to material ratio (mg/mL), 195.55 mg/ml. The salidroside yield under optimal conditions was found to be 1.59 mg/g dried samples, which were well-matched with the predicted value of 1.56 mg/g dried samples. These results will provide useful information about optimized extraction conditions for the development of salidroside as hepatoprotective therapeutics.

• Korean Journal of Medicinal Crop Science
• /
• v.16 no.6
• /
• pp.446-454
• /
• 2008

An advanced extraction method by ultrasonic extraction with applied solid phase extraction (SPE) has been developed for the determination of simultaneous eight major ginsenosides, namely ginsenosides Rg1, Re, Rf, Rb1, Rg2, Rc, Rb2, and Rd in the root of Panax ginseng. Four extraction methods including n-BuOH reflux extraction (Method A), 70% EtOH reflux extraction (Method B), 50% MeOH reflux extraction with SPE (Method C), and 50% MeOH ultrasonication with SPE clean-up process (Method D) were investigated for the determination of eight major ginsenosides. Total contents of ginsenosides were highest by extraction of Method C as $2.408{\pm}0.011%$. However, Method D was evaluated as relatively simpler and more efficient method due to short extraction time, small solvent consumption and less expensive, compared to conservative reflux method. Ginsenosides were also satisfactorily separated with good resolution and the accuracy range was between 1.05 and 4.06% as relative standard deviation (RSD) by Method D. SPE condition and HPLC condition were further optimized for determination of eight major ginsenosides by the ultrasonic extraction method. Conclusively, ultrasonic extraction of 2 g sample of ginseng using ultrasonic bath and 1 loading for SPE was evaluated as proper condition for extraction of ginseng.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.4
• /
• pp.687-692
• /
• 1998

To use onion(Allium cepa L.) residue as raw materials of food product, yields of onion-juice according to various extracting methods and optimal extracting condition of quercetin and its related glycosides were carried out. Onion juices gained by the methods of pressing, rotary crushing, freeze pressing and enzyme treatment. The yield by the method of enzyme treatment was higher than others. The yields of juice from fresh onion and heat-treated onion(8$0^{\circ}C$/10min) by pressing were 66% and 83%, respectively. Ethanol extraction of onion was efficient at 75$^{\circ}C$ and acetic acid extraction was proper at 3% concentration for 3 hours at 11$0^{\circ}C$. The onion extract was fractionated in the order of hexane, chloroform, ethylacetate and butanol to test flavonoids. The highest abundant flavonoids were found in ethylacetate and butanol fraction.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.11
• /
• pp.1031-1040
• /
• 2014

In this paper, a new condition diagnosis algorithm for the lens injection molding process using various features extracted from cavity pressure, nozzle pressure and screw position signals is developed with the aid of probability neural network (PNN) method. A new feature extraction method is developed for identifying five (5), seven (7) and two (2) critical features from cavity pressure, nozzle pressure and screw position signals, respectively. The node energies extracted from cavity and nozzle pressure signals are also considered based on wavelet packet decomposition (WPD). The PNN method is introduced to build the condition diagnosis model by considering the extracted features and node energies. A series of the lens injection molding experiments are conducted to validate the model, and it is demonstrated that the proposed condition diagnosis model is useful with high diagnosis accuracy.

• The Korea Journal of Herbology
• /
• v.28 no.4
• /
• pp.1-6
• /
• 2013

Objectives : In other to determine the optimal extraction conditions, the various Bojungikgi-tang (BJIGT) decoctions prepared by different pressure levels and different extraction times were compared and evaluated in terms of the extract yield and the total soluble solid content. Methods : Decoctions were prepared by the pressure levels of 0 (non-pressurized) and 1 $kgf/cm^2$ (pressurized) for 60, 120 and 180 min. The extract yield and the total soluble solids content of decoctions were measured, and the amounts of the reference compounds in decoctions were investigated by the analysis using high performance liquid chromatography. Results : The extract yield and the total soluble solid content were higher in decoctions extracted by the pressurized method than those from decoction with non-pressurized method. The patterns of yield and contents showed a proportional increase to the extraction time. In analysis of the linear regression for four reference compounds such as liquiritin, nodakenin, hesperidin, and glycyrrhizin, the good linearity with the correlation coefficient more than 0.9999 was observed. The highest contents for four reference compounds were observed at 180 min of both the pressurized method and the non-pressurized method. Conclusions : This study suggests that the pressure in extraction method and the extraction time affect the compositional constituents in BJIGT decoctions. The extraction time of 180 min could be chosen in both pressurized and non-pressurized method as optimal extraction condition.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.1
• /
• pp.228-236
• /
• 1997

The browning characteristic and dyeability of the mushroom were examined to establish the optimum condition for browning and extraction in the process of obtaining the natural dye, brown colorant. The composition of browning extracts from mushroom was also analyzed and the dyeability were investigated. The results of this study are as follows, 1. The optimum condition for obtaining the browning colorant from mushroom was the crushed phase of sample. 2. The browning reaction by enzymes in mushroom was efficient at a temperature of 35$^{\circ}C$, a duratron period of 2 hr and pH of 8. 3. The optimum condition for extraction of browning extracts from browned mushroom was at 95$^{\circ}C$ and Ihr. 4. To analyze the content of browning extracts in the mushroom, three fractions were obtained from gel filtration using Sephadex G-25 and the fraction 1 was melanin and the fraction 3 was dihydroxyphenylanine (DOPA) and glutaminyldihydroxybenzene (GDHB) . 5. The turbidity in enzymatic browning extraction of mushroom increased depending on refrigeration storage (4$^{\circ}C$) and UV radiation. The filtration of the extracts resulted in a decrease of absorbance. 6. The dyeability of the fraction 1 was greater compared to that of the fraction 3 and that of wool greater compared to the other two fabric materiales.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.10
• /
• pp.1203-1210
• /
• 2007

The multibeam surveillance radar is a state-of-art of 3D radar technology. It applies the stacked beam-on-received realized by a digital beamformer. In this paper, a method of a low target altitude extraction for multibeam surveillance radar in multipath environmental condition is proposed and investigated. The model of multipath propagation and radar generation produced from the low altitude target in multibeam surveillance radar and the nelder-mead simplex multipath reduction(NMSMR) method which enables a reliable low altitude target extraction in specular reflection situations are described. The proposed algorithm is simulated to confirm the effectiveness of proposed algorithm in accordance with a various of target altitudes and radar frequencies.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.3
• /
• pp.451-460
• /
• 2017

This study optimized the extraction of antioxidants from Gugija (Lycium chinensis Mill). To determine operational parameters, including ethanol concentration ($X_1$, 0~80%) and extraction time ($X_2$, 1~5 hr), response surface methodology was applied to monitor yield, anthocyanins, flavonoids and DPPH radical scavenging activity. Coefficients of determinations ($R^2$) of the models were range of 0.8645~0.9859 (p<0.01~0.1) in dependant parameters. Yield of Gugija extracts was maximized 23.12% in extraction conditions of 4.22 h at 8.25% ethanol. Anthocyanins was maximized 1.43 (OD in 530 nm) in extraction conditions of 3.06 h at 79.98% ethanol. Flavonoids was maximized $3,100{\mu}g/100g$ in extraction conditions of 3.37 h at 67.02% ethanol. DPPH radical scavenging activity was maximized 96.93% in extraction conditions of 1.67 h at 69.81% ethanol. Optimum extraction conditions (2.5 h extraction at 70% ethanol) were obtained by superimposing the contour maps with regard to anthocyanins, flavonoids and DPPH radical scavenging activity of Gugija. Maximum values of anthocyanins, flavonoids and DPPH radical scavenging activity in optimum extraction condition were 1.0080 (OD in 530 nm), $3,145{\mu}g/100g$, 96.96%, respectively. But values of anthocyanins, flavonoids and DPPH radical scavenging activity in water extraction condition (1 h at water) were 0.4652 (OD in 530 nm), $1,633{\mu}g/100g$, 86.98%, respectively.