• 대한전자공학회논문지TE
• /
• 제39권3호
• /
• pp.90-96
• /
• 2002

역할기반 접근통제(RBAC：Role-Based Access Control)는 사용자의 역할에 기반을 둔 접근통제 방법으로 다양한 컴퓨터, 네트워크 보안 분야에 있어서 유연성을 제공한다. 그러나 역할기반 접근통제는 역할이나 허가 등을 적용하는 대상으로 사용자만을 고려하고 있으므로 실제의 응용 시스템 상에서 정확한 접근통제를 위해서는 사용자뿐만 아니라 주체 및 객체를 추가로 고려할 필요성이 있다. 본 논문에서는 다단계 보안시스템을 위하여 역할기반 접근통제 모델에 사용자, 주체, 객체, 역할에 대한 보안등급을 추가로 고려하여 확장된 역할기반 접근통제 모델 $ERBAC_3$를 제안한다.

• Korean Chemical Engineering Research
• /
• 제58권3호
• /
• pp.480-485
• /
• 2020

Onsager 이론으로 확장된 Maxwell-Wagner 분극 모델을 이용하여 전도성 입자로 제조된 전기유변(Electrorheological, ER) 액체의 전기유변 현상에 대한 전산 모사를 수행하였다. 확장된 Maxwell-Wagner 분극 모델을 이용한 전산 모사는 전도성 입자로 제조된 전기유변 액체의 특성인 비제곱 전기유변 현상(Δτ∝Eⁿ, n≈1.5)을 확인하였다. 전단 흐름에서 전단응력이 정상상태에 도달하는 시점은 전기장 하에서 생성된 사슬 모양 구조가 전단 흐름에 의해 깨짐과 재생성이 정상상태에 도달하는 지점으로 나타났다. 또한, 전단 속도의 증가에 따라 전단응력이 최솟값을 보이는 전도성 입자를 기반으로 한 전기유변 액체의 현상도 관찰하였으며, 이것은 입자의 사슬 모양 구조가 무작위 배열로 바뀌는 순간에 발생하는 것임을 관찰하였다. 입자의 부피 분율 ϕ가 증가에 따라 전단응력은 증가하다가 일정해지는 경향도 관찰하였다.

• 상하수도학회지
• /
• 제14권1호
• /
• pp.108-116
• /
• 2000

Chlorine is widely used as a disinfectant in drinking-water systems throughout the world. Chlorine residual was used as an indicator for prediction of water quality in water distribution systems. The variation of chlorine residual in drinking water distribution systems of Suwon city was simulated using EPANET. EPANET is a computerized simulation model which predicts the dynamic hydraulic and water quality behavior within a water distribution system operating over an extended time period. Sampling and analysis were performed to calibrated the computer model in 1999 (Aug. Summer). Water quality variables used in simulations are temperature, roughness coefficient, pipe diameter, pipe length, water demand, velocity and so on. Extended water residence time affected water quality due to the extended reaction time in some areas. All area showed the higher concentration of chlorine residual than 0.2mg/l(standard). So it can be concluded that any area in Suwon city is not in biological regrowth problem. Rechlorination turned out to be an useful method for uniform concentration of free chlorine residual in distribution system. The cost of disinfectant could be saved remarkably by cutting down the initial chlorine concentration to the level which guarantees minimum concentration (0.2mg/l) throughout the distribution system.

• 조명전기설비학회논문지
• /
• 제28권11호
• /
• pp.77-83
• /
• 2014

The Estimation of State of Charge(SOC) for batteries is an important aspect of a Battery Management System(BMS). A method for estimating the SOC is proposed in order to overcome the individual disadvantages of the current integral and Open Circuit Voltage(OCV) estimation methods by combining them using Extended Kalman filter(EKF). The non-linear characteristics of the Li-Ion RC battery model used in this study is also solved through EKF. The proposed method is simulated in a Matlab environment with a Li-Ion Kokam battery (3.7V, 1,500mAh). Results showed that there is an improvement in the estimation error when using the proposed model compared to the conventional current integral method.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.287-297
• /
• 2018

To improve the performance of sensorless induction motor (IM) drives, a novel speed estimation method based on the real-time adaptive extended Kalman filter (RAEKF) is proposed in this paper. In this algorithm, the fuzzy factor is introduced to tune the measurement covariance matrix online by the degree of mismatch between the actual innovation and the theoretical. Simultaneously, the fuzzy factor can be continuously self-tuned tuned by the fuzzy logic reasoning system based on Takagi-Sugeno (T-S) model. Therefore, the proposed method improves the model adaptability to the actual systems and the environmental variations, and reduces the speed estimation error. Furthermore, a simple exponential function based on the fuzzy theory is used to reduce the computational burden, and the real-time performance of the system is improved. The correctness and the effectiveness of the proposed method are verified by the simulation and experimental results.

• Steel and Composite Structures
• /
• 제29권4호
• /
• pp.483-491
• /
• 2018

Timoshenko beam model is widely exploited in the literature to examine the mechanical behavior of stubby beam-like components. Timoshenko beam theory is well-known to require the shear correction factor in order to recognize the nonuniform shear distribution at a section. While a variety of shear correction factors are appeared in the literature so far, there is still no consensus on the most appropriate form of the shear correction factor. The Saint-Venant's flexure problem is first revisited in the frame work of the classical theory of elasticity and a highly accurate approximate closed-form solution is presented employing the extended Kantorovich method. The resulted approximate solution for the elasticity field is then employed to introduce two shear correction factors consistent with the Cowper's and energy approaches. The mathematical form of the proposed shear correction factors are then simplified and compared with the results available in the literature over an extended range of Poisson's and aspect ratios. The proposed shear correction factors do not exhibit implausible issue of negative values and do not result in numerical instabilities too. Based on the comprehensive discussion on the shear correction factors, a piecewise definition of shear correction factor is introduced for rectangular cross-sections having excellent agreement with the numerical results in the literature for both shallow and deep cross-sections.

• Structural Engineering and Mechanics
• /
• 제69권1호
• /
• pp.33-42
• /
• 2019

Thermal cracks are cracks that commonly form at early ages in mass concrete. During the concrete pouring process, the elastic modulus changes continuously. This requires the time domain to be divided into several steps in order to solve for the temperature, stress, and displacement of the concrete. Numerical simulations of thermal crack propagation in concrete are more difficult at early ages. To solve this problem, this study divides crack propagation in concrete at early ages into two cases: the case in which cracks do not propagate but the elastic modulus of the concrete changes and the case in which cracks propagate at a certain time. This paper provides computational models for these two cases by integrating the characteristics of the extended finite element algorithm, compiles the corresponding computational programs, and verifies the accuracy of the proposed model using numerical comparisons. The model presented in this paper has the advantages of high computational accuracy and stable results in resolving thermal cracking and its propagation in concrete at early ages.

• 한국BIM학회 논문집
• /
• 제10권3호
• /
• pp.54-62
• /
• 2020

There is growing consensus among planners and policymakers that brownfield remediation has positive impacts on neighborhoods in terms of housing prices, public health, and environmental quality. However, there is a limited understanding of how brownfield redevelopments spatially affect neighborhood housing turnover and stability. This paper addresses the spatial impacts of brownfield redevelopments on neighboring housing turnover in Cuyahoga County, Ohio. This study examines housing turnover before and after the remediation of brownfield sites countywide and in housing submarkets stratified by household income. Based on housing sales data between 1996 and 2007, the extended Cox Hazard model with the difference-in-difference approach is employed to clarify the causal relationships between brownfield redevelopments and neighboring housing turnover. Additionally, along with the results of the previous study examining impacts of brownfield remediation on nearby housing prices, this paper estimates the change of neighborhood stability due to brownfield redevelopments based on both attributes of housing prices and turnovers.

• 한국강구조학회 논문집
• /
• 제27권2호
• /
• pp.243-250
• /
• 2015

확장단부판(extended end-plate) 접합부는 보-기둥 모멘트 접합부의 한 형태로 접합부를 구성하는 단부판(end-plate)의 두께 및 길이, 고장력볼트의 개수 및 직경, 고장력볼트의 게이지 거리, 용접부의 치수 및 길이 등에 따라서 상이한 거동특성과 에너지소산능력을 발현한다. 이러한 확장단부판(extended end-plate)는 미국 및 유럽 등지에서는 다양한 기하학적 형상으로 기둥-보 접합부에 적용되고 있다. 그러나 현재 우리나라에서는 강구조 보-기둥 접합부에 적극적으로 적용되고 있지 못한 상황이다. 이렇게 적용성이 높지 않은 이유로는 기하학적 형상변화에 따른 설계강도식 제안, 에너지소산능력 평가 및 시공지침의 제공이 적절하게 이루어지지 못하고 있기 때문이다. 따라서 이 연구에서는 단부판(end-plate) 두께가 상대적으로 얇은 기하학적 형상을 갖는 비보강 확장단부판(unstiffened extended end-plate) 접합부의 에너지소산능력을 평가하여 에너지소산능력 예측모델을 제안하기 위한 기초자료를 제공하기 위하여 진행하였다. 이를 위하여 비보강 확장단부판(unstiffened extended end-plate) 접합부에 대한 3차원 비선형 유한요소해석을 단부판(end-plate)의 두께를 변수로 하여 수행하였다.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제10권1호
• /
• pp.37-48
• /
• 2004

인터넷의 성장과 함께 자바 네트워크 응용서비스가 빠른 속도로 증대되고 있다. 이러한 응용서비스는 일시적으로 네트워크가 분할되거나, 또는 특정 프로세스가 실패하더라도 투명하고도 안정적이며, 지속적으로 제공되는 것이 바람직하다. 이러한 요구사항을 만족시키기 위하여 다수의 그룹통신 시스템이 개발되어 왔다. 그러나 기존의 자바 그룹통신 시스템은 Extended Virtual Synchrony를 지원하지 못하거나 선입선출(FIFO), 인과(causal), 전체(total) 그리고 안전(safe) 순서 전달서비스와 같은 다양한 메시지 전달방식을 지원하고 있지 않다. 본 논문에서는 그룹 멤버간의 다양한 메시지 전달방식과 Extended Virtual Synchrony 모델을 지원하는 JACE 자바 그룹통신 시스템의 설계와 구현에 관하여 기술한다. JACE 시스템은 다양한 방식으로 쌓을 수 있는 다수의 프로토콜 모듈로 구성되어 있다. 개발된 JACE 시스템을 이용하여 웹 서비스에 대한 정보를 등록하고 발견할 수 있는 UDDI 레지스트리가 자바를 이용하여 실험적으로 구현되었다.