• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1359-1361
• /
• 2003

As the maximum power operating point(MPOP) of Photovoltaic(PV) power generation systems changes with changing atmospheric conditions such as solar radiation and temperature, an important consideration. In the design of efficient PV system is to track the MPOP correctly. Many maximum power point tracking(MPPT) techniques have been considered in the past, however, techniques using microprocessors with appropriate MPPT algorithms are favored because of their flexibility and compatibility with different PV arrays. Although the efficiency of these MPPT algorithms is usually high, it drops noticeably in case of rapidly changing atmospheric conditions. This pager proposed a new MPPT algorithm based on perturb & observe(P&O) algorithm with experiment. The results shows that the new P&O algorithm has successfully tracked the MPOP, even in case of rapidly changing atmospheric conditions, and has higher efficiency than ordinary algorithms.

• KIEAE Journal
• /
• 제10권4호
• /
• pp.87-100
• /
• 2010

The energy efficient design of the multiple stock housing is very important not only to save energy but also to increase sustainability in a whole city because the multiple stock housing type is dominated in the major residential supply markets in Korea. During the early design phase of the multiple stock housing type, the architect need convenient and accurate tools for evaluating energy consumptions based on building types rapidly. Building Information Modeling(BIM) is introduced as useful tool systems providing interoperability between 3rd dimensional modeling tools and environmental engineering analysis tools, and could reduce time and cost for unnecessary modeling works in the analysis. However, it is still hard to apply to building design practice and integrated energy simulation techniques because interoperability using industrial standard file formats such as IFC and bXML is still underdeveloped. Therefore, the purpose of this study is to perform the building energy simulations, to compare the results on typical building types in multiple stock housing based on BIM, and to clear the problems using industrial standard file formats between 3rd dimensional modeling and building energy simulation software. In addition, through comparisons with simulation results according to the typical building types such as building forms, orientations, and building stories, the interrelation ship and characteristics of BIM based building energy simulation software are analysed and evaluated.

• 정보처리학회논문지A
• /
• 제13A권2호
• /
• pp.171-176
• /
• 2006

이 논문에서 우리는 FPGA에서의 고속 푸리에 변환(FFT)을 함에 있어 에너지를 효율적으로 사용하는 디자인을 제안하고자 한다. FPGA에서의 FFT 구조들은 에너지 손실을 최소화 하기 위해서 설계되어왔다. 가로와 세로의 병렬성 정도와 같은 구조적인 성능 지표들을 정의 했으며, 설계 영역은 설계 디자인들의 조합을 통해서 생성했다. 우리는 에너지를 효율적으로 사용하는 디자인들을 얻기 위해 상위 계층 동작 예측을 사용하여 디자인의 고려사항들을 결정하였다. 우리는 다앙한 예측을 위해서 한 무리의 병렬성, radix, 저장 형태의 선택등을 갖는 성능 지표화된 디자인의 집합을 Xilinx Virtex-2 상에서 구현하였다. 우리의 디자인들은 Xilinx 라이브러리에 있는 최적화된 디자인들보다 에너지 손실이 57%에서 78%정도 감소했다. 에너지-영역-시간(EAT)과 같은 이해하기 쉬운 지표를 이용한 결과, 우리의 디자인들이 Xilinx의 디자인보다 3-13 배의 성능 개선 효과를 나타냈다.

• 한국멀티미디어학회논문지
• /
• 제21권6호
• /
• pp.667-677
• /
• 2018

Since sensor networks consist of sensor nodes with limited energy resources, so efficient energy use of sensor nodes is very important in the design of sensor networks. Sensor nodes consume a lot of energy for data transmission. Clustering technique is used to efficiently use energy in data transmission. Recently, mobile sink techniques have been proposed to reduce the energy load concentrated on the cluster header near a sink node. The CMS(Cluster-based Mobile sink) technique minimizes the generation of control messages by creating a data transmission path while creating clusters, and supports the inter-cluster one-hop transmission. But, there is a case where there is no connectivity between neighbor clusters, it causes a problem of having a long hop data transmission path regardless of local distance. In this paper, we propose a SCBC(Strong connection balancing cluster) to support the path of the minimum number of hops. The proposed scheme minimizes the number of hops in the data transmission path and supports efficient use of energy in the cluster header. This also minimizes a number of hops in data transmission paths even when the sink moves and establishes a new path, and it supports the effect of extending the life cycle of the entire sensor network.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권5호
• /
• pp.1618-1637
• /
• 2014

Clustering wireless sensor network is an efficient way to reduce the energy consumption of individual nodes in a cluster. In clustering, multihop routing techniques increase the load of the Cluster head near the sink. This unbalanced load on the Cluster head increases its energy consumption, thereby Cluster heads die faster and create an energy hole problem. In this paper, we propose an Energy Balancing Cluster Head (EBCH) in wireless sensor network. At First, we balance the intra cluster load among the cluster heads, which results in nonuniform distribution of nodes over an unequal cluster size. The load received by the Cluster head in the cluster distributes their traffic towards direct and multihop transmission based on the load distribution ratio. Also, we balance the energy consumption among the cluster heads to design an optimum load distribution ratio. Simulation result shows that this approach guarantees to increase the network lifetime, thereby balancing cluster head energy.

• 한국농촌건축학회논문집
• /
• 제26권2호
• /
• pp.9-16
• /
• 2024

In order to achieve carbon neutrality in the architectural field by 2050, this study analyzed the energy impact proportional to CO2 emissions of each technique, such as design methods, the properties of building structures, prefabrication methods, passive houses, and active facilities. In addition, the results were presented quantitatively in terms of carbon reduction, and corresponding housing cases were analyzed. The research method is limited to residential buildings at the Passive House energy level, and carbon reduction techniques and elements in architecture are examined through various literature and materials, and empirical cases are analyzed to determine the specific possibility of realizing carbon reduction in architecture. We want to secure it. Based on these analysis results, it was possible to suggest that it is possible to explore various approaches to carbon reduction in future residential construction. By combining the most efficient techniques according to the energy reduction level or goal setting of the building in question, we expect the possibility of achieving the goal of carbon reduction in the residential sector more realistically.

• 한국통신학회논문지
• /
• 제31권4A호
• /
• pp.393-401
• /
• 2006

배터리로 동작하는 휴대용 임베디드 시스템에서 에너지 소모는 중요한 설계 파라미터이며, 동적 전력 관리는 잘 알려진 저전력 설계 기법중의 하나이다. 본 논문에서는 실시간 시스템에서 에너지를 고려한 태스크 스케줄링 알고리듬을 제안한다. 제안한 스케줄링 알고리듬은 시스템에 여유 시간이 존재할 경우 장치 중첩도가 높은 태스크가 우선적으로 수행되도록 스케줄링 하여 장치의 전력 상태 전환 횟수를 줄여준다. 전력 상태 전환 횟수가 줄어들 경우 상태 전환에 따른 전력 소모가 감소하고, 동적 전력 관리의 기회를 더욱 얻을 수 있다. 실험 결과 EDF 알고리듬으로 동작 하는 시스템에서 동적 전력 관리를 한 경우와 비교하였을 때 에너지 소모가 약 23% 감소하였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 추계학술대회 논문집
• /
• pp.157-160
• /
• 2007

Recently, may high-rise buildings have been constructed, and will be constructed so that concerns about high-rise buildings have increased. We need to develop energy saving techniques immediately because the high-rise buildings consume a lot of energy. The most of effective energy saving method is the application of the efficient lighting designs and fixtures. The purpose of this study is to analyze the trend of lighting design, fixture and control system in Korea and it can be used the lighting application guide-line for the high-rise buildings.

• 한국CDE학회논문집
• /
• 제4권1호
• /
• pp.32-42
• /
• 1999

Approximate lofting or skinning is one of practical surface modeling techniques well used in CAD and reverse engineering applications. Presented in this paper is a method for approximately lofting a given set of curves wihin a specified tolereance. It is based on refitting input curves simultaneously on a common knot vector and interpolating them to get a resultant NURBS surface. A concept of reducing the number of interior knots of the common knot vector is well adopted to acquire more compact representation for the resultant surface. Energy minimization is newly introduced in curve refitting process to stabilize the solution of the fitting problem and get more fair curve. The proposed approximate lofting provides more smooth surface models and realizes more efficient data reduction expecially when the parameterization and compatibility of input curves are not good enough. The method has been successfully implemented in a new CAD/CAM product VX Vision? of Varimetrix Corporation.

• Journal of Semiconductor Engineering
• /
• 제2권1호
• /
• pp.99-108
• /
• 2021

Successive Approximation Register (SAR) Analog-to-Digital Converters (ADC) seem to become the hottest ADC architecture during the past decade in implementing energy-efficient high performance ADCs. In this overview, we will review what kind of circuit techniques and architectural advances have contributed to place the SAR ADC architecture at its current position, beginning from a single SAR ADC and moving to various hybrid architectures. At the end of this overview, a recently reported compact and high-speed SAR-Flash ADC is introduced as one design example of SAR-based hybrid ADC architecture.