• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.27-28
• /
• 2008

We have studied an organic layer-thickness dependent electrical and optical properties of organic light-emitting diodes in a device structure of ITO/TPD/$Alq_3$/LiF/Al. While a hole-transport layer thickness of TPD was varied from 35 to 65nm, an emissive layer thickness of $Alq_3$ was varied from 50 to 100nm. A ratio of those two layers was kept to about 2:3. Variation of the layer thickness changes a traverse time of injected carriers across the organic layer, so that it may affect on the chance of probability of exciton formation. Current-voltage-luminance characteristics of the devices show that there are typical rectifying behaviors, and the luminance reaches about $30,000cd/m^2$. Thickness-dependent current efficiency shows that there is a gradual increase of the efficiency as the total layer thickness increases. The efficiency becomes saturated to be about 10cd/A when the total thickness is above 140nm. They show that emission was from the $Alq_3$ layer, because the peak wavelength is about 525nm. View angle-dependent emission spectra show that the emission intensity decreases as the angle increases.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.7 s.349
• /
• pp.1-6
• /
• 2006

We show for the first time the optical properties of the selectively oxidized vertical cavity laser (VCL) - depleted optical thyristor (DOT), which has not only a low threshold current, but also a high sensitivity to the optical input light. In order to analyze their switching characteristics, nonlinear s-shaped current-voltage characteristics are calculated and the reverse full-depletion voltages (Vneg's) are obtained as function of semiconductor parameters by using a finite difference method (FDM). The selectively oxidized PnpN VCL-DOT clearly shows the nonlinear s-shaped current-voltage and lasing characteristics. A switching voltage of 5.24 V, a holding voltage of 1.50 V, a spectral response at 854.5 nm, and a very low threshold current of 0.65 mA is measured, making these devices attractive for optical processing applications.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.6 s.312
• /
• pp.92-100
• /
• 2006

In imaging devices such as digital cameras using a single image sensor, captured images are the sub-sampled images comprised of the pixels that have only one of the three primary colors per a pixel. This images should be restored to the color images through an image processing referred as color interpolation. In this paper, we derive relation between the average of the data from CFA image sensor and the average of each color channel data. By using this relation, a new efficient method for color interpolation is proposed. Also, in order to reduce the zipper effect in a restored image, missing luminance values are interpolated along any edges in the captured image. On the other hand, for the chrominance channel interpolation, we average difference between a chrominance value and a luminance value in a local area, and this average value is added to the pixel value of the interpolated location. The proposed method has been compared with several previous methods, and our experimental results show the better results than the other methods.

• Korean Journal of Optics and Photonics
• /
• v.17 no.4
• /
• pp.317-322
• /
• 2006

A polymeric arrayed waveguide grating (AWG) has been proposed and demonstrated by exploiting the nanoimprint method. A PDMS(polydimethylsiloxane) stamp with device patterns engraved was developed out of a master mold made of quartz glass. The device was fabricated by transferring the pattern in the PDMS stamp to a spin-coated polymer film without using any etching process. The device had 8 output channels, while the center wavelengths of each output channel were positioned from 1543.7 nm to 1548.3 nm with the spacing of 0.8 nm. The achieved average channel crosstalk and the 3-dB bandwidth were about 10 dB and 0.8 nm respectively.

• Journal of Engineering Education Research
• /
• v.2 no.1
• /
• pp.10-16
• /
• 1999

In this paper, we developed the internet-based educational software package (DVLab) for design and virtual experiment of the digital logic circuits. The DVLab consists of the LogicSim module for design and simulation of digital combinational/sequantial logic circuits, micro-controller application circuits and the BreadBoard module for virtual experiment and the Theory module for lecture and the Report/ReportChecker module and some other utility modules. All developed modules can be run as application programs as well as applets in the Internet. The LogicSim and the BreadBoard support real time clock function, output verification function on the designed circuits, trace function of logic values, copy-protection function of designed circuits and provide various devices including logic gates, TTLs, LED, buzzer, and micro-controller. The educational model of digital logic circuit design and experiment using the DVLab is also presented in this paper.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.9
• /
• pp.21-30
• /
• 1999

Halo pocket implantation in MOSFETs, which is known to be an efficient method to provent the punchthrough and threshold voltage roll-off phenomena, decreases the drain current of MOSFET devices. Although the decrease of the drain current in halo structure MOSFET is usually explained in terms of the increase of the threshold voltage, more decrease in the drain current than is predicted by the increased threshold voltage has experimentally been observed. In this work, the effect of halo doping profile on the drain current degradation is investigated in terms of the field distribution along the channel. Effective mobility model of the halo MOSFETs due to pocket implantation is presented and the degradation of the mobility is shown to be effective in the further decrease of the drain current. Present model is shown to be in good agreement with experimental results.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.10
• /
• pp.1175-1182
• /
• 2015

This paper has been an era of full-fledged objects Internet of Things(IoT), which involved the subject of this communication in the communication paradigm of the human heart. Things Arduino-based appliances ON, the system was implemented using the smartphone alarm in the Internet environment. All appliances even if plug connected to an external power source only standby power is present. This system is used for communication with the Arduino things. Connect the appliances power automatically rings the smartphone alarm minimize appliances standby power to things all by ON automatically connected to the Arduino, and the work of giving consumer electronics devices to help weather that automatically operates by Objects is an Internet system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.4
• /
• pp.761-776
• /
• 2012

This paper proposes the revised Roman character code system using Unicode 3.0. The background of the paper is whether the Latin character code system th using in the world in Unicode V.3 is proper or not in the side of the transmission efficiency in data communications. In data communications, when the consecutive 4 bits or 8 bits of "0" bit from the information devices input into the line coder, its consecutive "0" bits are scrambled to the predetermined bit patterns to avoid the syncronization loss. The paper was based on the statistical data for the using frequency of the alphabet letter and the proposed rule for characters coding in [1]. The paper was focused to improve of Unicode itself and UTF-8 code system. As a result of the paper, when the proposed coding systems for Latin character in Unicode 3.0 itself and UTF-8 code system, the scrambler efficiency using HDB-3 in the line coder of the data transmission system could be improved about 3645 ~ 31400% and 480 ~ 1700% respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.5
• /
• pp.791-796
• /
• 2017

In this study, we investigated the influence of the fabrication process of stacked capacitors on the cell capacitance by using Load Lock (L/L) LPCVD system for dielectric thin film of DRAM capacitor. As a result, it was confirmed that the capacitance difference of about 3-4 fF is obtained by reducing the effective thickness of the oxide film by about $6{\AA}$ compared to the conventional non-L/L device. In addition, Cs was found to be about 3-6 fF lower than the calculated value, even though the measurement range of the thickness of the nitride film as an insulating film was in a normal management range. This is because the node poly FI CD is managed at the upper limit of the spec, resulting in a decrease in cell surface area, which indicates a Cs reduction of about 2fF. Therefore, it is necessary to control the thickness of insulating film and CD management within 10% of the spec center value in order to secure stable Cs.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.3
• /
• pp.517-524
• /
• 2018

This Paper presents the real time things control method through Web browser that has no limited by time and place. To design and realize the system that not only makes it possible to communicate with other protocols but also reinforces the advantages of each protocol, the real time communication environment, based on the WebSocket technology of HTML5 whose international standardization has recently been completed, is realized. Also, the message communication environment in the low electricity and limited communication environment is realized using MQTT(Message Queue Telemetry Transport) protocol which is in the spotlight as the optimum protocol in the IoT environment. And by designing intuitive and simple hardware and realizing the responsive web interface which is not limited by the user's contact devices, the interactive system in which the user receives real time data from the hardware and reversely the user controls the things is designed and realized.