• Journal of the Korean Vacuum Society
• /
• v.14 no.2
• /
• pp.91-96
• /
• 2005

The silicon-on-insulator (SOI) wafer fabrication technique has been developed by using ion-cut process, based on proton implantation and wafer bonding techniques. It has been shown by SRIM simulation that 65keV proton implantation is required for a SOI wafer (200nm SOI, 400nm BOX) fabrication. In order to investigate the optimum proton dose and primary annealing condition for wafer splitting, the surface morphologic change has been observed such as blistering and flaking. As a result, effective dose is found to be in the $6\~9\times10^{16}\;H^+/cm^2$ range, and the annealing at $550^{\circ}C$ for 30 minutes is expected to be optimum for wafer splitting. Direct wafer bonding is performed by joining two wafers together after creating hydrophilic surfaces by a modified RCA cleaning, and IR inspection is followed to ensure a void free bonding. The wafer splitting was accomplished by annealing at the predetermined optimum condition, and high temperature annealing was then performed at $1,100^{\circ}C$ for 60 minutes to stabilize the bonding interface. TEM observation revealed no detectable defect at the SOI structure, and the interface trap charge density at the upper interface of the BOX was measured to be low enough to keep 'thermal' quality.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.6
• /
• pp.117-122
• /
• 2008

Although the pulse diagnosis is the one of the most important diagnostic process to traditional medical doctors, there is no proper communication tool between experts and trainees. In this paper, we have developed a indentation training system which consists of a hardware measuring indent pressure on artificial arm quantitatively and a software providing a indentation training program. The hardware for measurement of indent pressure profile includes 3 load cells embedded in the artificial arm, signal amplification part and digitization part, NI-USB 6009 with 200Hz sampling rate. For setting up a relationship table between weights and output voltages, 8 standard weights were used. To evaluate this hardware, 3 oriental medical specialists were involved and their indent pressure profile were recorded three times respectively. From these, it was found that pulse diagnosis process could be divided into 3 periods and the maximum load were $500g{\cdot}f$ approximately while doctors perform a pulse diagnosis. The indentation training program was implemented with LabView and designed to monitor the differences between the pressure profile of a expert and that of a trainee so to offer some visual feedback to the trainee. Also, this program could provide the trends of training performances. With this developed system, the education of pulse diagnosis is expected to be more quantitative and effective.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.705-710
• /
• 2017

This paper proposes an estimation method of populations of Grapholita molestas using object segmentation and an SVM classifier in the moth images. Object segmentation and moth classification were performed on images of Grapholita molestas moth acquired on a pheromone trap equipped in an orchard. Object segmentation consisted of pre-processing, thresholding, morphological filtering, and object labeling process. The classification of Grapholita molestas in the moth images consisted of the training and classification of an SVM classifier and estimation of the moth populations. The object segmentation simplifies the moth classification process by segmenting the individual objects before passing an input image to the SVM classifier. The image blocks were extracted around the center point and principle axis of the segmented objects, and fed into the SVM classifier. In the experiments, the proposed method performed an estimation of the moth populations for 10 moth images and achieved an average estimation precision rate of 97%. Therefore, it showed an effective monitoring method of populations of Grapholita molestas in the orchard. In addition, the mean processing time of the proposed method and sliding window technique were 2.4 seconds and 5.7 seconds, respectively. Therefore, the proposed method has a 2.4 times faster processing time than the latter technique.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.157-163
• /
• 2017

The object segmentation approach has the merit of reducing the processing cost required to detect moths of interest, because it applies a moth detection algorithm to the segmented objects after segmenting the objects individually in the moth image. In this paper, an object segmentation method for moth detection in pheromone trap images is proposed. Our method consists of preprocessing, thresholding, morphological filtering, and object labeling processes. Thresholding in the process is a critical step significantly influencing the performance of object segmentation. The proposed method can threshold very elaborately by reflecting the local properties of the moth images. We performed thresholding using global and local versions of Ostu's method and, used the proposed method for the moth images of Carposina sasakii acquired on a pheromone trap placed in an orchard. It was demonstrated that the proposed method could reflect the properties of light and background on the moth images. Also, we performed object segmentation and moth classification for Carposina sasakii images, where the latter process used an SVM classifier with training and classification steps. In the experiments, the proposed method performed the detection of Carposina sasakii for 10 moth images and achieved an average detection rate of 95% of them. Therefore, it was shown that the proposed technique is an effective monitoring method of Carposina sasakii in an orchard.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.2
• /
• pp.30-39
• /
• 2009

Extraction of glomeruli region plays a very important role for diagnosing nephritis automatically. However, it is not easy to extract glomeruli region correctly because the difference between glomeruli region and other region is not obvious, simultaneously unevennesses that is brought in the sampling process and in the imaging process. In this study, a new method for extracting renal glomeruli region using genetic algorithm is proposed. The first, low and high resolution images are obtained by using Laplacian-Gaussian filter with ${\sigma}=2.1$ and ${\sigma}=1.8$, then, binary images by setting the threshold value to zero are obtained. And then border edge is detected from low resolution images, the border of glomeruli is expressed by a closed B-splines' curve line. The parameters that decide the closed curve line with this low resolution image prevent the noises and the border lines from breaking off in the middle by searching using genetic algorithm. Next, in order to obtain more precise border edges of glomeruli, the number of node points is increased and corrected in order from eight to sixteen and thirty two from high resolution images. Finally, the validity of this proposed method is shown to be effective by applying to the real images.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.4
• /
• pp.95-102
• /
• 2016

Computer security incident such as confidential information leak and data destruction are constantly growing and it becomes threat to information in digital devices. To respond against the incident, digital forensic techniques are also developing to help digital incident investigation. With the development of digital forensic technology, a variety of forensic artifact has been developed to trace the behavior of users. Also, a diversity of forensic tool has been developed to extract information from forensic artifact. However, there is a issue that information from forensic tools has its own forms. To solve this problem, it needs to process data when it is output from forensic tools. Then it needs to compare and analyze processed data to identify how data is related each other and interpret the implications. To reach this, it calls for effective method to store and output data in the course of data processing. This paper aims to propose DFIOC (Digital Forensic Indicators Of Compromise) that is capable of transcribing a variety of forensic artifact information effectively during incident analysis and response. DFIOC, which is XML based format, provides "Evidence" to represent various forensic artifacts in the incident investigation. Furthermore, It provides "Forensic Analysis" to report forensic analysis result and also gives "Indicator" to investigate the trace of incidence quickly. By logging data into one sheet in DFIOC format for forensic analysis process, it is capable of avoiding unnecessary data processing. Lastly, since collected information is recorded in a normalized format, data input and output becomes much easier as well as it will be convenient to use for identification of collected information and analysis of data relationship.

• 재활복지
• /
• v.21 no.2
• /
• pp.63-88
• /
• 2017

This study evaluated the actual status of special needs of the hearing-impaired person for disaster response. The analysis revealed a significant level of unmet needs in disaster response for hearing-impaired person. The 5 special needs in disaster response include: 1) communication needs, which involve securing the means to make an emergency rescue request and communicating information during the rescue process; 2) transportation needs, which indicate the effective evacuation capacity and the level of training; 3) medical needs, which address the degree of preparedness for physical and mental emergency measures and the delivery of health information for rescue and first aid process; 4) maintaining functional independence needs, which refer to the level of self-preparedness to minimize damage in disaster situations, and; 5) supervision needs, which correspond to a personalized support system provided to disaster-vulnerable groups.

• Journal of Convergence for Information Technology
• /
• v.11 no.6
• /
• pp.262-269
• /
• 2021

The Ministry of National Defense is re-establishing the role of the Army in accordance with the defense reform and is promoting the Warrior Platform, a next-generation individual combat system. The Warrior Platform project is divided into three stages and is being promoted. In the first stage, the quality and performance of individual items are improved, in the second stage, items between system development are integrated, and in the third stage, the combat capability is maximized by developing an integrated unit weapon system. In this paper, detailed sub-items for the five essential required competencies (survival, lethality, mobility, sustainability, Communication) that are considered for building an effective warrior platform are presented. We also present a plan that can be used to prepare a specific master plan for the Army's Warrior Platform project by using Analytic Hierarchy Process(AHP) and selecting the priority of the five required capabilities and detailed sub-items for different unit types. As a result of analyzing the priorities of the four types of units with different mission types, we find that there are differences for each unit. These results are expected to be used as useful reference materials for setting the future direction for the development of warrior platform.

• Smart Media Journal
• /
• v.9 no.4
• /
• pp.66-72
• /
• 2020

As the online education market expands, educational contents with various presentation methods are being developed and released. In addition, it is imperative to develop content that reflects the usability and user environment of users who use this educational content. However, for qualitative growth of contents that will support quantitative expansion of markets, existing model analysis methods are urgently needed at a time when development direction of newly developed contents is secured. In this process of content development, a typical model for setting development goals is needed, as the rules of the prototype affect the entire development process and the final development outcome. It can also provide a positive benefit that screens the issue of performance dualization between processes due to the absence of communication between a single entity or between a number of entities. In the case of AR-based educational content which is effective to secure data necessary for development by securing samples of similar categories because there are not enough ready-made samples released. Therefore, a big data statistical analysis service is needed that can easily collect data and make decisions using big data. In this paper, we would like to design analysis services that enable the selection and detection of intuitive multidimensional factors and attributes, and propose big data-based statistical analysis services that can assist cooperative activities within an organization or among many companies.

• International Journal of Computer Science & Network Security
• /
• v.22 no.7
• /
• pp.35-42
• /
• 2022

The article identifies the problem of monitoring the quality of higher education in three main areas, which are comparative pedagogical systems of education. The first direction is determined by dissertation works, the second - monographs and textbooks, and the third reveals scientific periodicals. According to its internal structure, monitoring the quality of education combines important management components identified in the article (analysis, evaluation and forecasting of processes in education; a set of methods for tracking processes in education; collecting and processing information to prepare recommendations for research processes and make necessary adjustments). Depending on the objectives, three areas of monitoring are identified: informational (involves the accumulation, structuring and dissemination of information), basic (aimed at identifying new problems and threats before they are realized at the management level), problematic (clarification of patterns, processes, hazards, those problems that are known and significant from the point of view of management). According to its internal structure, monitoring the quality of education combines the following important management components: analysis, evaluation and forecasting of processes in education; a set of techniques for tracking processes in education; collection and processing of information in order to prepare recommendations for the development of the studied processes and make the necessary adjustments. One of the priorities of the higher education modernization program during the COVID-19 pandemic is distance learning, which is possible due to the existence of information and educational technologies and communication systems, especially for effective education and its monitoring in higher education. The conditions under which the effectiveness of pedagogical support of monitoring activities in the process of distance learning is achieved are highlighted. According to the results of the survey, the problems faced by higher education seekers are revealed. A survey of students was conducted, which had a certain level of subjectivity in personal assessments, but the sample was quite representative.