• 제목/요약/키워드: EMI measurement.

검색결과 121건 처리시간 0.025초

EMI Prediction of Slew-Rate Controlled I/O Buffers by Full-Wave and Circuit Co-Simulation

  • Kim, Namkyoung;Hwang, Jisoo;Kim, SoYoung
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제14권4호
    • /
    • pp.471-477
    • /
    • 2014
  • In this paper, a modeling and co-simulation methodology is proposed to predict the radiated electromagnetic interference (EMI) from on-chip switching I/O buffers. The output waveforms of I/O buffers are simulated including the on-chip I/O buffer circuit and the RC extracted on-chip interconnect netlist, package, and printed circuit board (PCB). In order to accurately estimate the EMI, a full-wave 3D simulation is performed including the measurement environment. The simulation results are compared with near-field electromagnetic scan results and far-field measurements from an anechoic chamber, and the sources of emission peaks were analyzed. For accurate far-field EMI simulation, PCB power trace models considering IC switching current paths and external power cable models must be considered for accurate EMI prediction. With the proposed EMI simulation model and flow, the electromagnetic compatibility can be tested even before the IC is fabricated.

근거리 전자장 스캐닝 시스템의 잡음 대 성능 비 향상 기술 (Enhancement Technologies of Signal-to-Noise Ratio in the Near-Field Scanning Systems)

  • 신영산;이성수
    • 전기전자학회논문지
    • /
    • 제22권2호
    • /
    • pp.510-513
    • /
    • 2018
  • 최근 전자파 적합성(EMC: electromagnetic compatibility)의 중요성이 매우 높아짐에 따라 칩 수준에서의 전자파 간섭(EMI: electromagnetic interference) 측정이 자주 요구되고 있다. IEC 61967 및 IEC 62508에서 규정된 근거리 전자장 스캐닝(NFS: near-field scanning) 시스템은 칩 레벨에서의 전자파 간섭을 분석하는 대표적인 방법이다. 칩이 점점 고속화되면서 근거리 전자장 스캐닝 시스템의 측정 주파수는 광대역화되어야 하지만 근거리 전자장 탐침(NFP: near-field probe)의 신호 대 잡음 비(SNR: signal-to-noise ratio)가 저하된다는 문제가 있다. 본 논문에서는 근거리 전자장 스캐닝 시스템에서 광대역 특성을 가지면서도 잡음 대 성능 비를 향상시키는 기술에 대해 살펴본다.

고주파자계측정용 센서에 관한 연구 (A Study on the Sensor for Measuring the High Frequency Magnetic Fields)

  • 이복희;정승수;박형기;백용현;임동묵
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1992년도 추계학술대회 논문집
    • /
    • pp.114-117
    • /
    • 1992
  • 본 논문에서는 자기적분형 자계센서의 설계방법과 교정방법을 제안하고, 파도대전류에 의하여 형성되는 자계에 대한 거리-응답 특성시험과 주파수 변화에 대한 응답도의 측정을 수행하였다. 자기적분형 센서는 적분저항의 증가와 더불어 감지전압은 상승하였으나 감쇠시간은 줄어드는 특성을 나타내었다. 또한 전기적 등가회로를 구성하여 이론적으로 해석 한 바 실험결과와 잘 일치하였다.

  • PDF

광대역 페라이트 전파흡수체의 제작과 평가에 관한 연구 (Fabrication and Evaluation of Broad-Band Ferrite EM-wave Absorber)

  • 손준영;배재영;원영수;송재만;김동일
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2001년도 춘계종합학술대회
    • /
    • pp.244-248
    • /
    • 2001
  • 전자산업과 전파통신기술이 발달함에 따라 인류는 풍요로운 생활을 영위하고 있지만, 전파의 사용증대로 인해 EMI와 같은 많은 사회적 문제와 불요 전자파가 발생하고 있다. 따라서, CISPR, FCC, ANSI 등의 기구는 EMC 대책을 위해 전파환경의 규정을 제안하고 있다 EMI/EMC 측정을 위한 전파무향실(anechoic chamber)에 대한 국제 규정을 만족하기 위해서는, 30 MHz ∼ 1,000 MHz까지의 범위에서 20 dB이상의 전파흡수능을 가져야 한다. 하지만, 1998년 11월, CISPR11은 EMI 측정의 주파수 범위를 1 GHz ∼ 18 GHz로 확장하였다[1]. 본 논문에서는 상기의 요구를 만족하는 새로운 형태의 전파흡수체(Electromagnetic Wave Absorber)를 제안하고 등가재료 정수법(Equivalent Material Constants Methods)을 사용하여 광대역 설계를 수행하였다. 그 외에 실험은 30 MHz ∼ 2 GHz까지의 주파수 범위에서 행해졌으며, 제안한 설계 이론의 타당성을 확인하였다.

  • PDF

Structural Analysis of Species in NbCI5-EMIC Room-Temperature Molten Salt with Raman Spectroscopic Measurement and Ab Initio Molecular Orbital Calculation

  • Koura, Nobuyuki;Matsuzawa, Hidenori;Kato, Tomoki;Idemoto, Yasushi;Matsumoto, Futoshi
    • 전기화학회지
    • /
    • 제5권4호
    • /
    • pp.183-188
    • /
    • 2002
  • The structure of species formed in $NbCI_5-I-ethyl-3-methylimidazolium$ chloride (EMIC) room-temperature molten salt (RTMS) was examined with the Raman spectroscopic measurement and ab initio molecular orbital calculation. The equilibrium structures of $NbCl_5,\;NbCl_6^-,\;Nb_2CI_{10},\;Nb_2CI_{11}^-,\;Nb_3CI_6^-,\;NbCI_6^--EMI^+\;(in\;which\;NbCI_6^-$ anion approaches $EMI^+$ cation with strong interaction) and $Nb_2CI_{11}^--EMI^+$ were obtained with the HF/LANL2DZ level of calculation. The harmonic frequencies at each equilibrium structure were compared with Raman spectra. The harmonic frequencies of $NbCI_6^--EMI^+,\; Nb_2CI_{11}^--EMI^+,\;and\;Nb_2CI_{10}$ were in good agreement with the Raman spectra of RTMS melts. In the $NbCI_5-EMIC RTMS$, the main species were $NbCI_6^-\;and\;EMI^+$. In the $NbCl_5-EMIC$ RTMS added $NbCl_5\;over\;50mol\%$, small amount of $Nb_2CI_{11}^-\;and\; Nb_2CI_{10}$ were also formed. The structures of anions and cation in the RTMS distorted from free ions with Coulomb force.

Small Loop Antenna for EMI Controlled and Monitoring

  • Khemchan, A.;Khamphakdi, P.;Urabe, Junichiro;Khan-ngern, W.
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2004년도 ICCAS
    • /
    • pp.470-473
    • /
    • 2004
  • This paper presents conducted emission noise measurement from electronic equipment in frequency range of 1 MHz up to 30 MHz by small loop antenna. Small loop antenna measurement method can measure common-mode (CM) and differential-mode (DM) component of the noise on a pair of power line at the same time. The CM and DM can be measured separately. The theory of this measurement method is introduced and analyzed. The measured results were compared with the conventional measurement by Line Impedance Stabilization Network (LISN) and result a good trend between those methods.

  • PDF

동력 분산형 고속전철의 전자파 Source 및 Victim에 관한 연구 (Study on the Electromagnetic Sources and Victims of the High-Speed EMU)

  • 김윤명;주영준;구은희;구본철;유재성
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2008년도 춘계학술대회 논문집
    • /
    • pp.1209-1212
    • /
    • 2008
  • 동력분산형 고속전철은 분산된 EMI 발생원(source)을 가지도록 제작되기 때문에, 분산된 전자계 감수품(感受品, victim) 가까이에서 기존의 동력집중형 시스템보다 전자계 발생원을 더 많이 가지고 있다. 이 연구에서는, 전자계 발생원들과 전자계 감수품들을 확인하고, 고속전철 시스템의 안전 운행을 위하여 EMI/EMS/EMC를 취급하는 방법을 개발한다. 개발되는 내용은, 고속전철의 전자파 장해 방지 측정과 기준연구, 제어용 부품 등에 대한 EMI/EMS 기준 수립, 그리고 시제품에 대한 EMI/EMC 시험 및 평가이다. 또한 최신 무선 통신 장비에 의한 영향과 PLD(전원선 교란)에 의한 효과도 이 연구에서 조사될 것이다.

  • PDF

PVD법을 이용한 전자파 차폐용 시트 제조 및 차폐효율 특성 (Preparation of EMI Shielding Sheet by PVD Method and Its Characteristic of EMI Shielding Efficiency)

  • 채성정;홍병표;이병수;변홍식
    • 공업화학
    • /
    • 제21권5호
    • /
    • pp.527-531
    • /
    • 2010
  • Fe계 metal powder를 이용하여 최적화된 전자파차폐 시트를 제조한 후, 제조된 시트에 physical vapor deposition (PVD)법으로 여러 금속들을 증착시켜 최종 전자파차폐용 시트를 제조하였다. 또한 증착된 금속들의 전자파 효율 특성을 분석하기 위하여 polyvinylidene fluoride (PVdF) 나노섬유 막을 시트로 활용하였다. 전기적 특성을 알아보기 위해 4-point probe로 측정하였으며, energy dispersive spectroscopy (EDS)를 이용하여 제조된 sheet에 금속이 증착되었음을 확인하였다. 차폐효율은 전자파차폐효율측정기를 이용하여 측정하였다. 전기저항은 $1000\;{\AA}$일 때 Cu에서 $641.95{\Omega}{\cdot}cm$로 가장 낮은 저항 값을 나타내었다. 전자파 차폐효율은 증착된 금속의 두께의 증가에 따라 증가되었으며, Cu가 $1000\;{\AA}$으로 증착된 sheet가 최고 효율인 32.5 dB을 나타내었다.

EMI Issues in Pseudo-Differential Signaling for SDRAM Interface

  • Jang, Young-Jae;Yi, Il-Min;Kim, Byungsub;Sim, Jae-Yoon;Park, Hong-June
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제15권5호
    • /
    • pp.455-462
    • /
    • 2015
  • H-field EMI measurements have been performed for the single-ended, the differential, and the pseudo-differential signaling on a 11" FR4 microstrip line. The pseudo-differential signaling reduces EMI by more than 10 dB compared to the single-ended signaling if the delay mismatch is lower than 5% of a period for a 3 GHz clock signal. Empirical H-field equations for both differential and single-ended signaling showed fair agreements with measurements.

EMI/EMC 측정용 십자형 대수 주기 다이폴 안테나의 설계 및 해석 (A Design of EMI / EMC Crossed Log-Periodic Dipole Antenna)

  • 김진태;최학근;진년강
    • 한국전자파학회지:전자파기술
    • /
    • 제5권3호
    • /
    • pp.48-58
    • /
    • 1994
  • 본 논문에서는 EMI/EMC 측정용 안테나로서 다이폴 소자가 료차된 삽자형 대수-주기 다이폴 안테나 (CLPDA: Crossed Log-Periodic Dipole Antenna)를 제시하고 모멘트 법과 전송선로 이론을 결합하여 해석하였다. 이 안테나의 광대역 특성을 고려하여 전 주파수 범위에서 임피던스 정합에 중점을 두었으며, 이에 따라 트윈-붐(Twin-boom) 급전 방식을 사용하였다.해석 결과로써 전류 분포, 입력 어드미턴스, 복사 패턴 및 이득을 계산 하였으며, 실제 CLPDA를 설계하여 복사 패턴과 이득을 측정하였다. 제작한 CLPDA의 측정치는 주어진 주파수 범위(200MHz~500MHz)내에서 이론치에 근접하게 나타났다.

  • PDF