• 마이크로전자및패키징학회지
• /
• 제17권4호
• /
• pp.73-76
• /
• 2010

A two-facet approach was used to investigate the parametric performance of functional high-speed DDR3 (Double Data Rate) DRAM (Dynamic Random Access Memory) die placed in different types of BGA (Ball Grid Array) packages: wire-bonded BGA (FBGA, Fine Ball Grid Array), flip-chip (FCBGA) and lead-bonded $microBGA^{(R)}$. In the first section, packaged live DDR3 die were tested using automatic test equipment using high-resolution shmoo plots. It was found that the best timing and voltage margin was obtained using the lead-bonded microBGA, followed by the wire-bonded FBGA with the FCBGA exhibiting the worst performance of the three types tested. In particular the flip-chip packaged devices exhibited reduced operating voltage margin. In the second part of this work a test system was designed and constructed to mimic the electrical environment of the data bus in a PC's CPU-Memory subsystem that used a single DIMM (Dual In Line Memory Module) socket in point-to-point and point-to-two-point configurations. The emulation system was used to examine signal integrity for system-level operation at speeds in excess of 6 Gb/pin/sec in order to assess the frequency extensibility of the signal-carrying path of the microBGA considered for future high-speed DRAM packaging. The analyzed signal path was driven from either end of the data bus by a GaAs laser driver capable of operation beyond 10 GHz. Eye diagrams were measured using a high speed sampling oscilloscope with a pulse generator providing a pseudo-random bit sequence stimulus for the laser drivers. The memory controller was emulated using a circuit implemented on a BGA interposer employing the laser driver while the active DRAM was modeled using the same type of laser driver mounted to the DIMM module. A custom silicon loading die was designed and fabricated and placed into the microBGA packages that were attached to an instrumented DIMM module. It was found that 6.6 Gb/sec/pin operation appears feasible in both point to point and point to two point configurations when the input capacitance is limited to 2pF.

• 한국광학회지
• /
• 제13권1호
• /
• pp.1-8
• /
• 2002

지구관측위성의 해상도가 정밀해 짐에 따라 광학 탑재체 즉 카메라의 구경이 대구경화 되고 있으며, 이에 따라 발사 및 운용환경에서 주어진 광학성능을 만족하는 설계/가공/조립과 함께 광학계의 경량화가 주요 요구 사항이 되어졌다. 반사경은 수차 및 광경로 등의 광학적 이유와 가공성 등의 이유로 대구경 광학계에서 사용되고 있으며, 위성용 광학계의 경량화의 상당 부분이 반사경 경량화를 통하여 이뤄지고 있다. 본 논문에서는 직경 30cm의 플랫 백, 싱글 아치, 더블 아치, 벌집 샌드위치 반사경에 대하여 위성용 반사경의 주요 형상 변형 요인을 대표할 수 있는 구조해석과 열 해석을 동시에 수행하여 각 반사경의 변형을 구하였고 광학 성분(Zernike다항식)과 이의 효과를 분석하였다. 더 나아가, 이러한 결과와 비례의 법칙 및 Valente의 무게 예상 공식을 사용하여 직경이 300-1000mm가지의 반사경의 기계변형을 추정하였으며, 이를 바탕으로 네 가지 모델의 적용 가능 구간 및 자동초점기능을 적용하였을 때의 성능향상을 계산하였다.

• 센서학회지
• /
• 제27권2호
• /
• pp.93-98
• /
• 2018

In this paper, an energy-efficient 11.49-bit successive approximation register (SAR) capacitance-to-digital converter (CDC) for capacitive sensors with a figure of merit (FoM) of 31.6 pJ/conversion-step is presented. The CDC employs a SAR algorithm to obtain low power consumption and a simplified structure. The proposed circuit uses a capacitive sensing amplifier (CSA) and a dynamic latch comparator to achieve parasitic capacitance-insensitive operation. The CSA adopts a correlated double sampling (CDS) technique to reduce flicker (1/f) noise to achieve low-noise characteristics. The SAR algorithm is implemented in dual operating mode, using an 8-bit coarse programmable capacitor array in the capacitance-domain and an 8-bit R-2R digital-to-analog converter (DAC) in the charge-domain. The proposed CDC achieves a wide input capacitance range of 29.4 pF and a high resolution of 0.449 fF. The CDC is fabricated in a $0.18-{\mu}m$ 1P6M complementary metal-oxide-semiconductor (CMOS) process with an active area of 0.55 mm2. The total power consumption of the CDC is $86.4{\mu}W$ with a 1.8-V supply. The SAR CDC achieves a measured 11.49-bit resolution within a conversion time of 1.025 ms and an energy-efficiency FoM of 31.6 pJ/step.

• Food Science and Biotechnology
• /
• 제17권5호
• /
• pp.1092-1096
• /
• 2008

Commercial food products from major cities of Coahuila, Mexico were screened to identify residues of transgenic deoxyribonucleic acid (DNA) and/or proteins. After performed, an inventory on all products that contained a soybean-based ingredient in a commercial grocery store in the city of Saltillo, Coahuila, Mexico, 245 food products were identified and grouped in 15 classes according to the soybean ingredient as well as the manufacturing process used for their elaboration. Similar sampling was made for the different food classes in the cities of Monclova, Piedras Negras, and Torreon. A total of 88 samples were analyzed and DNA was extracted by the hexadecyltrimethyl-ammonium bromide (CTAB) technique with slight modification to obtain better DNA quality (1). In addition, segments of the transgenic genes one that codifies for 5-enolpyruvylshikimate-3-phosphate synthase (epsps), cry 1A, and the cauliflower mosaic virus (CaMV) promoter were amplified using polymerase chain reaction (PCR). The transgenic proteins 5-enolpyruvylshikimate-3-phosphate synthase (CP4 EPSPS) and insecticidal crystal protein (Cry 1Ab/Ac) were identified using double antibody sandwich-enzymatic linked immunoassay analysis (DAS-ELISA). Presence of transgenic genes and/or proteins was identified in 35.3% of the commercial products samples.

• 한국문헌정보학회지
• /
• 제42권2호
• /
• pp.327-370
• /
• 2008

본 연구는 사서의 직업사회화에 관한 총체적인 행위이론을 도출하기 위한 일차적인 연구로서 사서직의 직업사회화 경험의 의미와 경험의 구조가 무엇인지를 밝히고, 그 이해를 도모하고자 하는 연구이다. 연구의 참여자는 학부에서 문헌정보학(도서관학)을 전공하고, 현재 서울과 경기도의 공공, 대학, 학교, 전문도서관에서 5년 이상의 정규직경험을 가지고 있는 16명의 현직 사서 및 사서교사들이며, 개별적으로 2회의 개방적 및 반구조적인 심층면담을 하여 자료수집이 이루어졌다. 수집된 자료의 현상학적 분석 결과 연구 참여자들이 체험한 사서직의 직업 사회화경험은 1) '업무 심화와 업무능력 화장을 통해 성장함', 2) '조지문화에 순응함', 3) '이용자와 더불어 성숙함', 4) '양면적 직업의식을 가짐', 5) '사서로서의 자기실현을 추구함'의 5개의 주제범주로 도출되었다. 또한 사서의 직업사회화의 총체적 의미는 사서가 상호작용적 조정과정을 농해 공유하는 이상적인 사서 상을 구체화시키고 실현해 나가는 과정으로, 현실에 적합한 전문성을 갖춘 사서 되기를 지향하는 것으로 나타났다.

• 환경위생공학
• /
• 제20권1호
• /
• pp.55-63
• /
• 2005

Ground water samples of 275 were collected from Gapyeong county which it contained six-eup and myeon and analyzed for 12 mineral inorganics extending from March to October in 2004. Among the inorganics, Calcium, Magnesium, Sodium, Potassium, Copper and Zinc had more than $70\%$ of detection frequencies, which coincided with essential inorganics required by the human body. The average values of inorganic contents by sampling sites were insignificant. Fluorine contents of 8 samples, $2.9\%$ of 275 samples, exceeded KDWR, and it was considered to be affected by a base rock being made up granite and gneiss because there were not polluting sources around. It is necessary to find out relation between geological characteristics and mineral inorganics in ground water through the further investigation. Compared to noted concentrations of bottled water, inorganic minerals including Calcium, magnesium, Sodium and Potassium related to taste were fluent double in target samples and those average concentrations were 14.80, 3.80, 7.60, and $2.31\cal{mg/L}$ respectively.

• 에너지공학
• /
• 제13권2호
• /
• pp.93-100
• /
• 2004

간접법을 이용한 표면오염도 측정 시 시료채취와 동시에 방사선 검출이 가능한 스메어 매체를 제조하고 성능을 평가하였다. 스메어 매체는 무기섬광체를 고분자 막에 함침시킨 것으로서, 용매로는 디메틸포름아마이드(DMF)와 메틸렌클로라이드(MC) 그리고 고분자 소재로서 폴리설폰(PSF)을 사용하였고, 무기섬광체는 CAYS(cerium activated yttrium silicate)를 사용하였다. 함침막은 단일 및 이중구조로 제조하였고, 물. 메타놀 등 비용매성 욕조에 침지하거나 용매 증발을 통하여 고형화하여 특성을 비교하였다. 방사선과의 상호작용에 의하여 무기섬광물질 함침막으로부터 방출되는 광자의 계측은 광전증배관과 고전압원, 증폭기. 계수기로 구성된 원형계수기를 사용하였다. $^{14}$ C표면오염에 대해 무기섬광 함침막을 이용해 얻은 계수율을 통상의 저준위 알파/베타 계수기로 얻은 결과와 비교할 때 상대 감도가 약 50%로 나타났다. 또한, 계수효율이 상대적으로 낮았지만 저에너지 베타선 방출핵종인 $^3$H표면오염도측정이 가능하다는 것을 확인하였다.

• Environmental Analysis Health and Toxicology
• /
• 제20권2호
• /
• pp.167-178
• /
• 2005

This study was carried out to evaluate the temporal, spatial, and seasonal variations of VOC, and to characterize the VOC concentrations in two large industrial complexes located in Pohang and Gumi cities. Twenty -four hours continuous sampling of selected VOC was made with STS 25 sequential tube samplers and double-bed adsorbent tubes. Air samples were collected every three hour interval for 7 consecutive days in each site during summer and winter. VOC were determined by thermal desorption coupled with GC/MS. A total of 27 VOCs of environmental concern were determined, including aliphatic, aromatic and halides. Generally. concentrations of toxic VOC were higher in Gumi than Pohang, and VOC levels in industrial areas were typically several-fold higher than those in residential areas. The most abundant VOC appeared to be toluene for both cities. However, chlorinated VOC were higher in Gumi than Pohang, while aromatic VOC were more abundant in Pohang than in Gumi. Two cities showed relatively different variations of VOC concentrations within a day. It is likely that traffic related sources are major factors affecting the VOC in Pohang, and industrial solvents usages are important sources in Gumi. These results imply that the occurrence and levels of atmospheric VOC are strongly dependent on the type of industries in each city. Therefore, in order to develop any control strategies or to establish the priority rankings for VOC in large industrial complexes, the type of industries and the occurrence of VOC in the atmosphere should be taken into consideration.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.29.1-29.10
• /
• 2019

Background: Reduction in postoperative complications is of vital considerations in impacted third molar teeth surgery. The aim of this study was to compare postoperative complications of impacted third molar surgeries for bone removal using laser, piezoelectric equipment, and conventional rotary instruments. Methods: To address the research purpose, the investigator designed the prospective double-blind clinical trial study. The sample size was determined 20 (40 teeth) by sampling formula in any kind of operation. The data of patients were obtained in the different periods in terms of pain, trismus, swelling, ecchymosis, and patient's satisfaction and then analyzed using SPSS 20 software via paired t test and Wilcoxon and McNemar's tests. Results: The pain immediately after surgery and 2 days and 7 days after surgery was higher in the laser group. The swelling immediately after surgery was more in the laser group but not significant. The amount of mouth opening immediately after surgery and 2 days and 7 days after surgery was significantly lower in the laser group than in the piezosurgery group. The total duration of surgery and duration of osteotomy were significantly longer in the laser group. The patient's satisfaction from surgery with piezosurgery was more than that with laser, but this difference was not significant. Conclusion: Due to the rising demand for impacted wisdom tooth surgery, the present study suggests that hard tissue laser surgery and piezosurgery can clear the future of impacted molar surgery, and these approaches are more efficient in reducing postoperative complications compared to the conventional surgeries.

• 전자공학회논문지SC
• /
• 제39권4호
• /
• pp.25-35
• /
• 2002

본 논문에서는 단일 폴리 공정을 기반으로 하여 8b 해상도로 200MHz의 고속 동작을 하기 위해 최적화된 시간 공유 서브레인징 ADC(Analog-to-Digital Converter)를 제안한다. 제안하는 ADC는 높은 정확도를 요구하는 하위 ADC에 이중 채널 구조를 적용하여 높은 샘플링 주파수를 보장하였고, 새로운 기준 전압 인가 방식을 적용하여 기준 전압의 빠른 정착 시간을 얻으면서 동시에 칩 면적을 크게 감소시켰다. 기준 전압을 생성하는 저항열에서는 선형성 및 속도 향상을 위해 기존의 인터메쉬드 구조를 보완한 새로운 저항열을 사용하였다. 8 비트 수준의 정밀도에서 면적 및 전력 소모를 최소화하기 위해 공통 드레인(common- drain) 증폭기 구조를 사용하여 샘플-앤-홀드 증폭기(Sample-and-Hold Amplifier：SHA)를 설계하였으며, 입력단에 스위치와 캐패시터로 구성된 동적 공통 모드 궤환 회로(Dynamic Common Mode Feedback Circuit)를 사용하여 SHA의 동적 동작 범위(dynamic range)를 증가시켰다. 동시에 상위 ADC와 하위 ADC간의 신호 처리를 단순화시키기 위해 상위 ADC에 새로운 인코딩 회로를 제안하였다.