• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1174-1177
• /
• 2006

A bottom contact organic thin film transistor (OTFT) is fabricated with an organic double-layered gate insulator (GI) and pentacene. The PMMA and MNB layers are treated on gate insulator and source/drain (S/D, Au) before depositing pentacene to investigate device properties and pentacene growth. The sequence of surface treatment affects a device performance seriously. The ultra-thin PMMA (below 50A) was deposited on organic gate insulator and S/D metal by spin coating method, which showed no deterioration of on-state current (Ion) although bottom contact structure was exploited. We proposed that the reason of no contact resistance (Rc) increase may be due to a wettability difference in between PMMA / Au and PMMA / organic GI. As a result, the device treated by $PMMA\;{\rightarrow}\;MNB$ showed much better Ion behavior than those fabricated by $MNB\;{\rightarrow}\;PMMA$. We will report the important physical and electrical performance difference associated with surface treatment sequence.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.4
• /
• pp.1-7
• /
• 2006

Injection molding is a very important industrial process for the manufacturing of plastics objects. During an injection molding process of composites, the fiber-matrix separation and fiber orientation are caused by the flow of molten polymer/fiber mixture. As a result, the product tends to be nonhomogeneous and anisotropic. Hence, it is very important to clarify the relations between separation orientation and injection molding conditions. So far, there is no research on the measurement of fiber orientation using image processing. In this study, the effects of fiber content ratio and molding condition on the fiber orientation-angle distributions are studied experimentally. Using the image processing method, the fiber orientation distribution of weld-line in injection-molded products is assessed. And the effects of fiber content and injection mold-gate conditions on the fiber orientation are also discussed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.351.1-351.1
• /
• 2014

In this study, we prepared the solution-based In-Ga-Zn oxide thin film transistors (IGZO TFTs) of multistacked active layer and characterized the gate bias instability by measuring the change in threshold voltage caused by stacking. The solutions for IGZO active layer were prepared by In:Zn=1:1 mole ratio and the ratio of Ga was changed from 20% to 30%. The TFTs with multistacked active layer was fabricated by stacking single, double and triple layers from the prepared solutions. As the number of active layer increases, the saturation mobility shows the value of 1.2, 0.8 and 0.6 (). The electrical properties have the tendency such as decreasing. However when gate bias VG=10 V is forced to gate electrode for 3000 s, the threshold voltage shift was decreased from 4.74 V to 1.27 V. Because the interface is formed between the each layers and this affected the current path to reduce the electrical performances. But the uniformity of active layer was improved by stacking active layer with filling the hole formed during pre-baking so the stability of device was improved. These results suggest that the deposition of multistacked active layer improve the stability of the device.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.445-447
• /
• 2016

Performance comparison between Tunneling Field-Effect Transistors (TFETs) was examined when three types of device parameter of double-gate TFET (DG-TFET) and single-gate TFET (SG-TFET) are varied. When the channel length is over 30 nm, silicon thickness is below 20 nm, and a gate insulator thickness decreases, the performance of $I_{on}$ and SS in SG-TFETs and DG-TFETs enhances. It shows that the performance of the DG-TFETs is improved than that of SG-TFETs at three types of device parameter.

• ETRI Journal
• /
• v.26 no.1
• /
• pp.7-13
• /
• 2004

To improve the characteristics of breakdown voltage and specific on-resistance, we propose a new structure for a LDMOSFET for a PDP scan driver IC based on silicon-on-insulator with a trench under the gate in the drift region. The trench reduces the electric field at the silicon surface under the gate edge in the drift region when the concentration of the drift region is high, and thereby increases the breakdown voltage and reduces the specific on-resistance. The breakdown voltage and the specific on-resistance of the fabricated device is 352 V and $18.8 m{\Omega}{\cdot}cm^2$ with a threshold voltage of 1.0 V. The breakdown voltage of the device in the on-state is over 200 V and the saturation current at $V_{gs}=5V$ and $V_{ds}$=20V is 16 mA with a gate width of $150{\mu}m$.

• Journal of Sensor Science and Technology
• /
• v.27 no.6
• /
• pp.362-367
• /
• 2018

A complementary metal oxide semiconductor (CMOS) binary image sensor is proposed for low-power and low-noise operation. The proposed binary image sensor has the advantages of reduced power consumption and fixed pattern noise (FPN). A gate/body-tied (GBT) p-channel metal-oxide-semiconductor field-effect transistor (PMOSFET)-type photodetector is used as the proposed CMOS binary image sensor. The GBT PMOSFET-type photodetector has a floating gate that amplifies the photocurrent generated by incident light. Therefore, the sensitivity of the GBT PMOSFET-type photodetector is higher than that of other photodetectors. The proposed CMOS binary image sensor consists of a pixel array with $394(H){\times}250(V)$ pixels, scanners, bias circuits, and column parallel readout circuits for binary image processing. The proposed CMOS binary image sensor was analyzed by simulation. Using the dynamic comparator, a power consumption reduction of approximately 99.7% was achieved, and this performance was verified by the simulation by comparing the results with those of a two-stage comparator. Also, it was confirmed using simulation that the FPN of the proposed CMOS binary image sensor was successfully reduced by use of the double sampling process.

• Journal of information and communication convergence engineering
• /
• v.9 no.6
• /
• pp.738-742
• /
• 2011

This paper has studied drain induced barrier lowering(DIBL) for Double Gate MOSFET(DGMOSFET) using analytical potential model. Two dimensional analytical potential model has been presented for symmetrical DGMOSFETs with process parameters. DIBL is very important short channel effects(SCEs) for nano structures since drain voltage has influenced on source potential distribution due to reduction of channel length. DIBL has to be small with decrease of channel length, but it increases with decrease of channel length due to SCEs. This potential model is used to obtain the change of DIBL for DGMOSFET correlated to channel doping profiles. Also device parameters including channel length, channel thickness, gate oxide thickness and doping intensity have been used to analyze DIBL.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.39-39
• /
• 2009

We fabricated p-channel TFTs based on poly Silicon. The 35nm thickness silicon dioxide layer structure got higher $I_{on}/I_{off}$ ratio, field-effect Mobility and output current than 10nm thickness. And 35nm layer showed low leakage current and threshold voltage. So, 35nm thickness silicon dioxide layer TFTs are faster reaction speed and lower power consumption than 10nm thickness.

• Journal of information and communication convergence engineering
• /
• v.9 no.3
• /
• pp.310-314
• /
• 2011

This paper has presented doping profile dependent threshold voltage for DGMOSFET using analytical transport model based on Gaussian function. Two dimensional analytical transport model has been derived from Poisson's equation for symmetrical Double Gate MOSFETs(DGMOSFETs). Threshold voltage roll-off is very important short channel effects(SCEs) for nano structures since it determines turn on/off of MOSFETs. Threshold voltage has to be constant with decrease of channel length, but it shows roll-off due to SCEs. This analytical transport model is used to obtain the dependence of threshold voltage on channel doping profile for DGMOSFET profiles. Also we have analyzed threshold voltage for structure of channel such as channel length and gate oxide thickness.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.481-482
• /
• 2008

In this paper, the advanced process has been presented to remove the WSix peeling that was made in sub 100nm DRAM SRCAT(Sphere-shaped-Recess-Ch annel-Array Transistor). The source of WSix peeling was proved to be the groove of gate poly film. We have completely solved the problems to adopt the gate-poly CMP (Chemical Mechanical Polishing) process.