• 한국전자파학회논문지
• /
• 제15권12호
• /
• pp.1161-1167
• /
• 2004

기존의 PLL(phase locked loop)은 폐루프 구조이므로 주파수 스위칭 속도가 낮은 단점을 갖는다. 이를 개선하기 위해서 개루프 구조를 혼합한 Digital Hybrid PLL 구조를 연구하였다. 또한 이 구조는 빠른 주파수 스위칭 속도로 동작할 수 있지만, VCO의 전압대 주파수 전달특성을 ROM 형태로 구현하는 DLT(digital look-up table)이 사용되어야 하므로 회로소자가 많아지고 소비전력이 증가된다. 그러므로, 본 논문에서는 복잡한 DLT의 구조를 간단한 Digital logic 회로로 대체시킨 새로운 구조를 제안하였다. 또한 주파수 합성때마다 타이밍 동기화를 이루는 회로를 설계하여 합성기의 항상성을 확보하였으며 DLT를 사용하는 방식과 비교하여 회로소자를 약 $28\%$정도 줄일 수 있다. 고속 스위칭 동작 특성과 주파수 합성을 시뮬레이션과 실제 회로 구현으로 확인하였다.

• The Journal of Advanced Prosthodontics
• /
• 제14권3호
• /
• pp.150-161
• /
• 2022

PURPOSE. The purpose of the study was to assess the influence of build orientations and density of support structures on the trueness of the 3D printed removable partial denture (RPD) frameworks. MATERIALS AND METHODS. A maxillary Kennedy class III and mandibular class I casts were 3D scanned and used to design and produce two 3D virtual models of RPD frameworks. Using digital light processing (DLP) 3D printing, 47 RPD frameworks were fabricated at 3 different build orientations (100, 135 and 150-degree angles) and 2 support structure densities. All frameworks were scanned and 3D compared to the original virtual RPD models by metrology software to check 3D deviations quantitatively and qualitatively. The accuracy data were statistically analyzed using one-way ANOVA for build orientation comparison and independent sample t-test for structure density comparison at (α = .05). Points study analysis targeting RPD components and representative color maps were also studied. RESULTS. The build orientation of 135-degree angle of the maxillary frameworks showed the lowest deviation at the clasp arms of tooth 26 of the 135-degree angle group. The mandibular frameworks with 150-degree angle build orientation showed the least deviation at the rest on tooth 44 and the arm of the I-bar clasp of tooth 45. No significant difference was seen between different support structure densities. CONCLUSION. Build orientation had an influence on the accuracy of the frameworks, especially at a 135-degree angle of maxillary design and 150-degree of mandibular design. The difference in the support's density structure revealed no considerable effect on the accuracy.

• 복식
• /
• 제56권9호
• /
• pp.1-13
• /
• 2006

The purpose of this study is to apply a concept of open structure to clothing design and to verify the characteristics found in the various types of clothing which has open structure. The literatures from various academic fields including philosophy, literature, social science, architecture, and fine arts are investigated to define the concept of openness and to analyze it from the perspectives both of the visual and of the moaning of openness. This paper is to identify the types and the characteristics of clothing by future intention, complexity, discontinuity of open structure. By closely examining fashion design after 1980s found in fashion collection publications and designer's websites, the results of this study are as follows: first, the concept of openness can be classified into two different levels, that is, visual and meaning, secondly, in clothing the concept of open structure is applied to the meaning side by future intention, by complexity and by discontinuity. Open structure through future Intention has new content and interpretation and must have the possibility of intelligence awakening, future guidance and basic contents. Open structure through complexity has secondary function exists concurrent with the shape key example is the smart clothes with the digital functions. It has functions of amusement, supplement and protective, and is future clothes which satisfies with health, welfare, desire of beauty. Open structure with discontinuity is clothes with dramatic changes in system, structures and states. Structure can be changed by silhouette, detail, or fabric, material, or dramatic and practical function as tools in terms of productions and environment. This study can help to formulate and to integrate the concept of open structure in clothing with various phases and enhance the value of clothes by showing an application of the concept of openness to the clothing in meaning level.

• 한국게임학회 논문지
• /
• 제8권1호
• /
• pp.91-101
• /
• 2008

대부분의 디자이너는 3DS MAX와 같은 전문 3D 애니메이션 저작도구를 사용하여 수작업으로 애니메이션을 제작한다. 이 방법은 많은 시간과 노력을 필요로 하며, 애니메이션 캐릭터들이 서로 상호작용 할 수 없다. 이를 개선하기 위해, 본 논문에서는 3DS MAX플러그인 형태의 인공지능 미들웨어를 설계하고 미들웨어에 필요한 인공지능 표현 구조와 내부 처리 방안을 제안한다. 제안 방법은 캐릭터가 보유할 인공지능 요소를 도형과 선분으로 그려 표현하는 방법으로 캐릭터의 인공지능 구조를 제작한다. 실험을 위해 기존 방법과, 제안하는 방법을 사용하여 동일한 애니메이션을 제작하고 작업량을 측정하였다. 실험 결과 소규모 작업에서는 기존의 방법과 비슷하거나 작업량이 많으나, 대규모의 작업에서는 기존 방법에 비해 최대 43%의 작업량 감소를 확인하였다. 본 논문에서 제안하는 방법을 사용하면, 애니메이션에서 캐릭터간의 상호작용이 가능하며 작업량 감소 효과를 얻을 수 있다.

• 한국통신학회논문지
• /
• 제30권2A호
• /
• pp.114-121
• /
• 2005

본 논문에서는 고속 동작을 위한 multi SHA(ammple and hold amplifier) 구조의 파이프라인 A/D 변환기 (analog-to-digital converter)를 제안하였다. 제안된 구조는 변환 속도를 높이기 위해, 동일한 SHA를 병렬로 연결하여 multi SHA를 구성하였다. 이를 비중첩 클럭(nonoverlapping clock)에서 동작하도록 하여 셀을 구성하는 SHA의 수와 비례한 빠른 샘플링 속도를 얻을 수 있도록 하였다. 제안된 구조를 적용하여 VDSL(very high-speed digital subscriber line) 모뎀의 아날로그 front-end단의 요구 사항을 만족하는 파이프라인 A/D 변환기를 설계하였다. 설계된 A/D 변환기의 DNL(differential nonlinearity)과 INL(integral nonlinearity)은 각각 $0.52LSB{\sim}-0.50LSB,\;0.80LSB{\sim}-0.76LSB$의 특성을 나타내어 설계 사양을 만족함을 확인하였다. 또한 2048 point에 대한 FFT를 수행한 결과 SNR이 약 66dB로 10.7 비트의 해상도가 얻어짐을 확인하였으며, 전력 소모는 24.32mW로 측정되었다.

• 한국실내디자인학회논문집
• /
• 제19권1호
• /
• pp.208-216
• /
• 2010

The design hotel where new life styles of users were created and the exchange of one's identity and the culture was executed was employed the interaction design which considered the attendance and experience of users as the important motives. This study is to discuss on the relationship between the design hotel and interaction design, and to compare and analyze the differences in the expression methods of them. It was concluded that the design hotel had a close relation with the properties of information supply, amusements, narrative, personalization, and social exchange in the interaction design, and it mainly used the digital media of non-material, the juxtaposition of strangeness, the change of structure, substitution of values, appropriation of hybrid as a means of its expression. In addition, it was revealed that the properties above did not simply apply to an open space but were connected as a dominant-subordinate relationship into one subject. It is expected that the field of interaction design in the design hotel will be expanded due to the spread of digital technology and its role and importance will be increased. Therefore, it is thought that the study to provide the development of a variety of contents of design hotel should be kept through the study of organic relation between different subjects, avoiding the indiscriminate use of the contents.

• 전기전자학회논문지
• /
• 제16권4호
• /
• pp.343-348
• /
• 2012

본 논문에서는 Digital PFC Controller에 적합한 11비트 100KS/s의 Algorithmic ADC를 설계하였다. 설계한 Algorithmic ADC는 PFC controller에 적합한 11비트 해상도를 만족하면서 반복적인 순환구조의 동작으로 인해 전체 크기를 줄일 뿐 아니라 소비 전류를 최소화 할 수 있다. 본 논문의 Algorithmic ADC는 0.18um 1Poly-3Metal의 CMOS 공정으로 제작 되었으며 100KS/s의 동작 속도에 SNDR 66.7dB, ENOB 10.78비트의 성능을 가진다. 또한 소비전류는 5V 전원 전압에서 780uA이며 설계된 ADC의 칩 면적은 $0.27mm^2$이다.

• International Journal of CAD/CAM
• /
• 제6권1호
• /
• pp.3-8
• /
• 2006

The application of three-dimensional (3-D) CAD has been popularized for design and production and digital manufacturing has been spreading in many industrial fields. By simulation of the production process using 3-D digital models, which are the core of CIM (Computer Integrated Manufacturing) system, the efficiency and safety of production are improved at each stage of work, and optimization of manufacturing can be achieved. This paper firstly describes the concept of "simulation based production" in shipbuilding and also digital manufacturing; the 3-D CAD system is indispensable for effective simulation because ship structure is three dimensionally complex. By simulation, "computer optimized manufacturing" can be possible. The most effective fields of simulation in shipbuilding are in jobs where many parties have to cooperate, while existing two-dimensional drawings are hardly observed the whole structures due to interference between structures or equipment of complex shape. In this paper some examples of the successful application in IHIMU (IHI Marine United Inc.) are shown: assembly of a pipe unit, erection of a complex hull block, carriage of equipment, installation of a propeller, and access in an engine room.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.741-746
• /
• 2004

We propose a new technique to the design and real-time implementation of an adaptive controller for robotic manipulator based on digital signal processors in this paper. The Texas Instruments DSPs(TMS320C80) chips are used in implementing real-time adaptive control algorithms to provide enhanced motion control performance for dual-arm robotic manipulators. In the proposed scheme, adaptation laws are derived from model reference adaptive control principle based on the improved direct Lyapunov method. The proposed adaptive controller consists of an adaptive feed-forward and feedback controller and time-varying auxiliary controller elements. The proposed control scheme is simple in structure, fast in computation, and suitable for real-time control. Moreover, this scheme does not require any accurate dynamic modeling, nor values of manipulator parameters and payload. Performance of the proposed adaptive controller is illustrated by simulation and experimental results for a dual arm robot consisting of two 4-d.o.f. robots at the joint space and cartesian space.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 추계종합학술대회
• /
• pp.271-274
• /
• 2001

본 논문에서는 최적 디지털 제어기의 설계에 샘플치 제어이론을 적용한다. 특히, 아날로그 제어기들의 멀티레이트 이산화에 H$_2$최적화를 이용한다. 멀티레이트 구조상 인과성 제약을 갖는 멀티레이트 H$_2$최적화를 통해 해를 얻는다. 설계 예제를 통해, 기존 이산화 방법과 비교하여, 멀티레이트 설계방법의 우수성을 확인한다.