• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.12 s.91
• /
• pp.1161-1167
• /
• 2004

The conventional PLL(phase locked loop) frequency synthesizer takes a long switching time because of the inherent closed-loop structure. The digital hybrid PLL(DH-PLL) which includes the open-loop structure into the conventional PLL synthesizer has been studied to overcome this demerit. It operates in high speed, but the hardware complexity and power consumption are the serious problem because the DLT(digital look-up table) is usually implemented by the ROM which contains the transfer characteristic of VCO(voltage controlled oscillator). This paper proposes a new DH-PLL using a very simple DLT-replacement digital logic instead of the complex ROM-type DLT. Also, a timing synchronization circuit for the very small over-shoot and shorter settling time is designed for the ultra fast switching speed at every frequency synthesis. The hardware complexity gets decreased to about $28\%,$ as compared with the conventional DH-PLL. The high speed switching characteristic of the frequency synthesis process can be verified by the computer simulation and the circuit implementation.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.3
• /
• pp.150-161
• /
• 2022

PURPOSE. The purpose of the study was to assess the influence of build orientations and density of support structures on the trueness of the 3D printed removable partial denture (RPD) frameworks. MATERIALS AND METHODS. A maxillary Kennedy class III and mandibular class I casts were 3D scanned and used to design and produce two 3D virtual models of RPD frameworks. Using digital light processing (DLP) 3D printing, 47 RPD frameworks were fabricated at 3 different build orientations (100, 135 and 150-degree angles) and 2 support structure densities. All frameworks were scanned and 3D compared to the original virtual RPD models by metrology software to check 3D deviations quantitatively and qualitatively. The accuracy data were statistically analyzed using one-way ANOVA for build orientation comparison and independent sample t-test for structure density comparison at (α = .05). Points study analysis targeting RPD components and representative color maps were also studied. RESULTS. The build orientation of 135-degree angle of the maxillary frameworks showed the lowest deviation at the clasp arms of tooth 26 of the 135-degree angle group. The mandibular frameworks with 150-degree angle build orientation showed the least deviation at the rest on tooth 44 and the arm of the I-bar clasp of tooth 45. No significant difference was seen between different support structure densities. CONCLUSION. Build orientation had an influence on the accuracy of the frameworks, especially at a 135-degree angle of maxillary design and 150-degree of mandibular design. The difference in the support's density structure revealed no considerable effect on the accuracy.

• Journal of the Korean Society of Costume
• /
• v.56 no.9 s.109
• /
• pp.1-13
• /
• 2006

The purpose of this study is to apply a concept of open structure to clothing design and to verify the characteristics found in the various types of clothing which has open structure. The literatures from various academic fields including philosophy, literature, social science, architecture, and fine arts are investigated to define the concept of openness and to analyze it from the perspectives both of the visual and of the moaning of openness. This paper is to identify the types and the characteristics of clothing by future intention, complexity, discontinuity of open structure. By closely examining fashion design after 1980s found in fashion collection publications and designer's websites, the results of this study are as follows: first, the concept of openness can be classified into two different levels, that is, visual and meaning, secondly, in clothing the concept of open structure is applied to the meaning side by future intention, by complexity and by discontinuity. Open structure through future Intention has new content and interpretation and must have the possibility of intelligence awakening, future guidance and basic contents. Open structure through complexity has secondary function exists concurrent with the shape key example is the smart clothes with the digital functions. It has functions of amusement, supplement and protective, and is future clothes which satisfies with health, welfare, desire of beauty. Open structure with discontinuity is clothes with dramatic changes in system, structures and states. Structure can be changed by silhouette, detail, or fabric, material, or dramatic and practical function as tools in terms of productions and environment. This study can help to formulate and to integrate the concept of open structure in clothing with various phases and enhance the value of clothes by showing an application of the concept of openness to the clothing in meaning level.

• Journal of Korea Game Society
• /
• v.8 no.1
• /
• pp.91-101
• /
• 2008

Most designers use professional 3D animation tools such as 3DS MAX to manually create animation. This manual method requires a great deal of time and efforts, and does not allow animation characters to interact with one another. In this paper, we design an AI middleware of form as 3DS MAX plug-in to solve these issues. We present an AI expression structure and internal processing method for this middleware, and the method for creating AI character's structure. It creates AI character's structure by drawing figures and lines for representing AI elements. For experiment, we have produced same animations with the traditional method and our method, and measured the task volume in both methods. This result verifies that the task volume is similar or higher than the traditional method in small-scale tasks, but up to 43% of the task volume is reduced in large-scale tasks. Using the method proposed in this paper, we see that characters in an animation interact each other, and task volume in large-scale tasks are reduced.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2A
• /
• pp.114-121
• /
• 2005

In this paper, Pipelined A/D converter with multi SHA structure is proposed for high speed operation. The proposed structure incorporates a multi SHA block that consists of multiple SHAs of identical characteristics in parallel to improve the conversion speed. The designed multi SHA is operated by non-overlapping clocks and the sampling speed can be improved by increasing the number of multiplexed SHAs. Pipelined A/D converter, applying the proposed structure, is designed to satisfy requirement of analog front-end of VDSL modem. The measured INL and DNL of designed A/D converter are $0.52LSB{\sim}-0.50LSB\;and\;0.80LSB{\sim}-0.76LSB$, respectively. It satisfies the design specifications for VDSL modems. The simulated SNR is about 66dB which corresponds to a 10.7 bit resolution. The power consumption is 24.32mW.

• Korean Institute of Interior Design Journal
• /
• v.19 no.1
• /
• pp.208-216
• /
• 2010

The design hotel where new life styles of users were created and the exchange of one's identity and the culture was executed was employed the interaction design which considered the attendance and experience of users as the important motives. This study is to discuss on the relationship between the design hotel and interaction design, and to compare and analyze the differences in the expression methods of them. It was concluded that the design hotel had a close relation with the properties of information supply, amusements, narrative, personalization, and social exchange in the interaction design, and it mainly used the digital media of non-material, the juxtaposition of strangeness, the change of structure, substitution of values, appropriation of hybrid as a means of its expression. In addition, it was revealed that the properties above did not simply apply to an open space but were connected as a dominant-subordinate relationship into one subject. It is expected that the field of interaction design in the design hotel will be expanded due to the spread of digital technology and its role and importance will be increased. Therefore, it is thought that the study to provide the development of a variety of contents of design hotel should be kept through the study of organic relation between different subjects, avoiding the indiscriminate use of the contents.

• Journal of IKEEE
• /
• v.16 no.4
• /
• pp.343-348
• /
• 2012

A 11b 100KS/s Algorithmic ADC for Digital PFC controller is proposed. The proposed Algorithmic ADC structure for 11bit resolution is based on a cyclic architecture to reduce chip area and power consumption. The prototype Algorithmic ADC implemented with a 0.18um 1Poly-3Metal CMOS process shows a SNDR 66.7dB and ENOB 10.78bits. And the current consumption is about 780uA at 100KS/s and 5V. The occupied active die area is $0.27mm^2$.

• International Journal of CAD/CAM
• /
• v.6 no.1
• /
• pp.3-8
• /
• 2006

The application of three-dimensional (3-D) CAD has been popularized for design and production and digital manufacturing has been spreading in many industrial fields. By simulation of the production process using 3-D digital models, which are the core of CIM (Computer Integrated Manufacturing) system, the efficiency and safety of production are improved at each stage of work, and optimization of manufacturing can be achieved. This paper firstly describes the concept of "simulation based production" in shipbuilding and also digital manufacturing; the 3-D CAD system is indispensable for effective simulation because ship structure is three dimensionally complex. By simulation, "computer optimized manufacturing" can be possible. The most effective fields of simulation in shipbuilding are in jobs where many parties have to cooperate, while existing two-dimensional drawings are hardly observed the whole structures due to interference between structures or equipment of complex shape. In this paper some examples of the successful application in IHIMU (IHI Marine United Inc.) are shown: assembly of a pipe unit, erection of a complex hull block, carriage of equipment, installation of a propeller, and access in an engine room.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.741-746
• /
• 2004

We propose a new technique to the design and real-time implementation of an adaptive controller for robotic manipulator based on digital signal processors in this paper. The Texas Instruments DSPs(TMS320C80) chips are used in implementing real-time adaptive control algorithms to provide enhanced motion control performance for dual-arm robotic manipulators. In the proposed scheme, adaptation laws are derived from model reference adaptive control principle based on the improved direct Lyapunov method. The proposed adaptive controller consists of an adaptive feed-forward and feedback controller and time-varying auxiliary controller elements. The proposed control scheme is simple in structure, fast in computation, and suitable for real-time control. Moreover, this scheme does not require any accurate dynamic modeling, nor values of manipulator parameters and payload. Performance of the proposed adaptive controller is illustrated by simulation and experimental results for a dual arm robot consisting of two 4-d.o.f. robots at the joint space and cartesian space.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.271-274
• /
• 2001

In this paper, optimal digital design is studied within the framework of sampled-data control theory. In particular, multirate discretization of analog controller is considered using an H$_2$optimality criterion. Solutions are obtained via multirate H$_2$optimization with a causality constraint due to the multirate structure. In design example, the comparison of the proposed methods is made with the conventional discretization methods, and demonstrate the superiority of the multirate design method.