• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.90-96
• /
• 2014

This paper presents a practical linearization technique for a wide-band bang-bang digital phase locked-loop(BBDPLL) by selecting optimal loop gains. In this paper, limitation of the theoretical design method for BBDPLL is explained, and introduced how to implement practical BBDPLLs with CMOS process. In the proposed BBDPLL, the limited cycle noise is removed by reducing the proportional gain while increasing the integer array and dither gain. Comparing to the conventional BBDPLL, the proposed one shows a small area, low power, linear characteristic. Moreover, the proposed design technique can control a loop bandwidth of the BBDPLL. Performance of the proposed BBDPLL is verified using CppSim simulator.

• Journal of IKEEE
• /
• v.21 no.4
• /
• pp.416-419
• /
• 2017

In this paper, we propose a new digital delay-locked loop (DLL) for high-speed DDR3/DDR4 SDRAMs. The proposed digital DLL adopts a fine delay line using phase interpolation to eliminate the jitter increase problem due to the boundary switching problem. In addition, the proposed digital DLL utilizes a new gradual search algorithm to eliminate the harmonic lock problem. The proposed digital DLL is designed with a 1.1 V, 38-nm CMOS DRAM process and has a frequency operating range of 0.25-2.0 GHz. It has a peak-to-peak jitter of 1.1 ps at 2.0 GHz and has a power consumption of about 13 mW.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.3
• /
• pp.352-358
• /
• 2016

A 5-phase phase-locked loop (PLL) for USB2.0 applications was implemented by using an all-synthesis technique. The length of the time-to-digital converter for the fine phase detector was halved by the operation of a coarse phase detector that uses 5-phase clocks. The maximum time difference between the rising edges of two adjacent-phase clocks was 6 ps at 480 MHz. The PLL chip in a 65-nm process occupies $0.038mm^2$, consumes 4.8 mW at 1.2 V. The measured rms and peak-to-peak output jitters are 8.6 ps and 45 ps, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.2
• /
• pp.151-158
• /
• 2002

In this paper, Phase locked microwave oscillator having the low phase noise and high stability for digital MMDS down converter was designed. we have been analyzed the low phase noise properties by the active device nonlinear equivalent circuits and derived the necessary and sufficient conditions for high stable voltage control oscillator. And it is applied to phase locked loop, we design the phase locked microwave oscillator of frequency synthesizer. Experimental results of designed phase locked oscillator shows -85dBc/Hz @ 10KHz phase noise properties and simulation result is -90Bc/Hz @ 10kHz respectively we shows that proposed low phase noise and stable conditions of phase locked microwave oscillator can be applied to design the high stable digital MMDS frequency synthesizer.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.2
• /
• pp.38-50
• /
• 1982

A new type of digital phase-locked loop (DPLL) called the modified digital Costas loop is proposed and analyzed. The main feature of the proposed loop is that the phase error detector of the loop has linear characteristic. This results from the use of the tan-1 (.) function in the loop. Accordingly, the DPLL can be characterized by a modulo-2$\pi$ linear difference equation. This paper is diveide into two parts. In Part I we describe the proposed system, and analyze the performance of the first-and second-order loops in the absence of noise by the Phase Plane technique. The locking ranges for the DPLL's to achieve exact locking independently of initial conditions have been obtained in closed forms. Also, the false lock and oscillation phenomena occurring under some initial conditions have been considered. These results have been verified by computer simulation. In Part ll we analyze the proposed system in the presence of noise. The steady state probability density function, mean and variance of the phase error have been obtained by solving the Chapman-Kolmogorov equation. These results will be presented in Part ll.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.250-254
• /
• 2007

As photovoltaic(PV) power generation systems become more common, it will be necessary to investigate islanding detection method for PV systems. Islanding of PV systems can cause a variety of problems and must be prevented. However, if the real and reactive powers of the load and PV system are closely matched, islanding detection by passive methods becomes difficult. Also, most active methods lose effectiveness when there are several PV systems feeding the same island. The active frequency drift positive feedback method(AFDPF) enables islanding detection by forcing the frequency of the voltage in the island to drift up or down. In this paper the research for the minimum value of chopping fraction gain applied digital phase-locked-loop (DPLL) to AFDPF considering output power quality and islanding prevention performance are performed by simulation and experiment according to IEEE Std 929-2000 islanding test.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.76-81
• /
• 2013

A new phase frequency detector based digital phase-locked loop (PLL) of 125 MHz was designed using the 130 nm CMOS technology library consisting of inverting edge detectors along with a typical digital phase-locked loop to reduce the lock time and jitter for mid-frequency applications. XOR based inverting edge detectors were used to obtain a transition earlier than the reference signal to change the output more quickly. The HSPICE simulator was used in a Cadence environment for simulation. The performance of the digital phase-locked loops with the proposed phase frequency detector was compared with that of conventional phase frequency detector. The PLL with the proposed detector took $0.304{\mu}s$ to lock with a maximum jitter of approximately 0.1142 ns, whereas the conventional PLL took a minimum of $2.144{\mu}s$ to lock with a maximum jitter of approximately 0.1245 ns.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.3E
• /
• pp.109-114
• /
• 2005

In this paper, we present a phase coherent all-digital transceiver for underwater acoustic communication, which allows the system to reduce complexity and increase robustness in time variant underwater environments. It is designed in the digital domain except for transducers and amplifiers and implemented by using a multiple digital signal processors (DSPs) system. For phase coherent reception, conventional systems employed phase-locked loop (PLL) and delay-locked loop (DLL) for synchronization, but this paper suggests a frame synchronization scheme based on the quadrature receiver structure without using phase information. We show experimental results in the underwater anechoic basin at MOERI. The results show that the adaptive equalizer compensates frame synchronization error and the correction capability is dependent on the length of equalizer.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.2
• /
• pp.37-44
• /
• 2007

As photovoltaic(PV) power generation system becomes more common, it will be necessary to investigate islanding detection method for PV systems. Islanding of PV systems can cause a variety of problems and must be prevented. However, if the real and reactive power of the load and PV system are closely matched, islanding detection by Passive methods becomes difficult. Also, most active methods lose effectiveness when there are several PV systems feeding the same island. The active frequency drift positive feedback method(AFDPF) enables islanding detection by forcing the frequency of the voltage in the island to drift up or down. In this paper the research for the minimum value of chopping fraction gain applied digital phase-locked-loop (DPLL) to AFDPF considering output power quality and islanding prevention performance are performed by simulation and experiment according to IEEE Std 929-2000 islanding test.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.1
• /
• pp.20-23
• /
• 2010

The analog front end (AFE) of a radio frequency identification transponder using the ISO 14443 type A standard with a 100% amplitude shift keying (ASK) modulation is proposed in this paper and verified by circuit simulations and measurements. This AFE circuit, using a 13.56 MHz carrier frequency, consists of a rectifier, a modulator, a demodulator, a regulator, a power on reset, and a dynamically enabled digital phase locked loop (DPLL). The DPLL, with a charge pump enable circuit, was used to recover the clock of a 100% modulated ASK signal during the pause period. A high voltage lateral double diffused metal-oxide semiconductor transistor was used to protect the rectifier and the clock recovery circuit from high voltages. The proposed AFE was fabricated using the $0.18\;{\mu}m$ standard CMOS process, with an AFE core size of $350\;{\mu}m\;{\times}\;230\;{\mu}m$. The measurement results show that the DPLL, using a demodulator output signal, generates a constant 1.695 MHz clock during the pause period of the 100% ASK signal.