• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.1
• /
• pp.60-65
• /
• 2004

Induction heating system is time varying system around curie point. So, it has many troubles which are system shut down and change the load impedance. In this paper has been designed the parallel resonant inverter which controlling the constant power and tracking the load resonant frequency with PLL is possible, in order to minimize switching losses and solve it's many troubles. The current full-bridge type parallel resonant inverter of an induction heating system was composed of IGBT in switching device. For regulating the output power of an induction heating system, the Fuzzy logic controller is used. The Fuzzy controller makes the control signal for a stable power regulating control and when reference is changed, it is superior to adaptability. It has been evaluated a stable behavior for a noise with switching and a load disturbance.

• Journal of Power Electronics
• /
• v.15 no.1
• /
• pp.216-226
• /
• 2015

Grid synchronization is one of the key techniques for the grid-connected power converters used in distributed power generation systems. In order to achieve fast and accurate grid synchronization, a new phase locked loop (PLL) is proposed on the basis of the complex filter matrixes (CFM) orthogonal signal generator (OSG) crossing-decoupling method. By combining first-order complex filters with relation matrixes of positive and negative sequence voltage components, the OSG is designed to extract specific frequency orthogonal signals. Then, the OSG mathematical model is built in the frequency-domain and time-domain to analyze the spectral characteristics. Moreover, a crossing-decoupling method is suggested to decouple the fundamental voltage. From the eigenvalue analysis point of view, the stability and dynamic performance of the new PLL method is evaluated. Meanwhile, the digital implementation method is also provided. Finally, the effectiveness of the proposed method is verified by experiments under unbalanced and distorted grid voltage conditions.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.7
• /
• pp.23-29
• /
• 2012

The LC-based digitally controlled oscillator (LC-DCO), a key component of the all digital phase locked loop (ADPLL), is designed using $0.18{\mu}m$ RFCMOS process with 1.8 V supply. The NMOS core with double cross-coupled pair is chosen to realize wide tuning range, and the PMOS varactor pair that has small capacitance of a few aF and the capacitive degeneration technique to shrink the capacitive element are adopted to obtain the high frequency resolution. Also, the noise filtering technique is used to improve phase noise performance. Measurement results show the center frequency of 2.7 GHz, the tuning range of 2.5 GHz and the high frequency resolution of 2.9 kHz ~7.1 kHz. Also the fine tuning range and the current consumption of the core could be controlled by using the array of PMOS transistors using current biasing. The current consumption is between 17 mA and 26 mA at 1.8V supply voltage. The proposed DCO could be used widely in various communication system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.8
• /
• pp.1099-1106
• /
• 2018

In this paper, we developed and then analyzed the specifications of the frequency synthesizer which was applied to long range MFR (Multi-function Radar). These specifications were able to guarantee the functions and performance of MFR. MFR was the radar system that used phase array for electronically scanning. This frequency synthesizer made various frequency signals including to STALO (Stable Local Oscillator) for MFR. By analyzing the MFR requirements, we choose the optimal frequency synthesis method and then we got the best performance and functionality including to physical size for this system. We designed and fabricated DDS (Direct Digital Synthesizer)-driven Offset-PLL (Phase Locked Loop) synthesizer to meet the requirements which were low phase noise, fast switching time and low spurious. This synthesizer had less than -131dBc/Hz@100kHz phase noise and less than $4.1{\mu}s$ switching time, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.10
• /
• pp.914-924
• /
• 1991

It has been generally used for PLL(Phase Locked Loop) to be synthesized randomly chosen frequency state, but the PLL locking time was inevitable element. A direct digital synthesizer. Which makes output frequency directly in sine wave by a phase accumulating method, could be leiminate the defect, although a phase distortion in frequency spectrum. In order to improve this disadvantage, the phase accumulating method is reconsidered in the side of he output wave formula expression. A new mechanism is proposed, and it is constructed by a most suitable logic elements. The spectrum of synthesized sine waveform is simulated and compared with a measured value, and it’s the coherence frequency hoppong state with the PN(Pseudo Noise) code sequence is confirmed. In this results, the power levels of phase distortion harmonics are decreased to 10~25dB and bandwidths are increased to 420kHz.

• Journal of IKEEE
• /
• v.26 no.4
• /
• pp.577-583
• /
• 2022

Verilog-HDL-based modeling can be performed to confirm the fast operation characteristics after setting the design parameters of each block considering the stability of the system by performing linear phase-domain modeling on the phase-locked loop. This paper proposed Verilog-HDL modeling including DCO noise and DTC nonlinear characteristic. After completing the modeling, the time-domain transient simulation can be performed to check the feasibility and the functionality of the proposed PLL system, then the phase noise result from the system design based on the functional model can be verified comparing with the ideal phase noise graph. As a result of the comparison of simulation time (6 us), the Verilog-HDL-based modeling method (1.43 second) showed 484 times faster than the analog transistor level design (692 second) implemented by TSMC 0.18-㎛.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.8
• /
• pp.1543-1548
• /
• 2009

In this paper, a high speed code synchronization circuit is proposed. for fast code synchronization, matched filler method is used for initial code acquisition with two channel correlators. Particular frequency patterns of the limited number having the information about PN code start time are composed and transmitted repeatedly to increase the probability of accurate initial synchronization. And digital frequency synthesizer is proposed. And it's performance is analyzed theoretically. The analysis show that fast frequency hopping is possible in frequency hopping system that use digital frequency synthesizer.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.2
• /
• pp.194-200
• /
• 2003

In this paper, FSK(Frequency Shift Keying) demodulator which is widely used for FH-SS system is designed and the experimental results are analyzed. The performance of the ADPLL(All-digital Phase-Locked-Loop), which is the main part of the demodulator circuit, is analyzed by the computer program. Using Maxplus-II tool provided by altera. co., ltd, each part of the ADPLL is designed and all of them is integrated into EPM7064SLC44-10 chip. And the simulation results are compared with the characteristics of the implemented circuits for analysis. There is about 2${\mu}\textrm{s}$ difference in time constant of the PLL. This difference is not critical in the demodulator. And the experimental results show that the transmitted data is well demodulated when the phase difference between the FSK modulated signal and the reference signal is about 180 degree.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.2
• /
• pp.77-84
• /
• 2000

In this paper, we discuss a symbol clock extraction scheme based on maximizing the band-edge component of the transmitted signal frequency spectrum for applications to 51.84Mbps VDSL system which uses a 16-QAM. The major characteristics of the digital PLL are examined. In addition, we suggest an efficient design method of a sinusoidal look-up table which is used for NCO.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.3
• /
• pp.116-122
• /
• 2006

A fast scan digital-IF FFT receiver at the radio communication band is presented for spectrum monitoring applications. It is composed of three parts: RF front-end, fast LO board, and signal processing board. It has about 19GHz/s scan rate, multi frequency resolution from 10kHz to 2.5kHz, and high sensitivity of below -99dBm. The design and performance analysis of the digital-IF FFT receiver are presented.