• 한국군사과학기술학회지
• /
• 제21권4호
• /
• pp.437-446
• /
• 2018

This paper describes the real-time logic implementation of orthogonal matching pursuit(OMP) algorithm for compressive sensing digital receiver. OMP contains various complex-valued linear algebra operations, such as matrix multiplication and matrix inversion, in an iterative manner. Xilinx Vivado high-level synthesis(HLS) is introduced to design the digital logic more efficiently. The real-time signal processing is realized by applying dataflow architecture allowing functions and loops to execute concurrently. Compared with the prior works, the proposed design requires 2.5 times more DSP resources, but 10 times less signal reconstruction time of $1.024{\mu}s$ with a vector of length 48 with 2 non-zero elements.

• 한국정보통신학회논문지
• /
• 제17권4호
• /
• pp.863-868
• /
• 2013

본 논문에서는 최근의 디지털논리시스템의 함수구성시에 도입되고 있는 그래프이론에 바탕을 둔 새로운 형태의 데이터구조 형태인 모서리값 확장 그래프를 추출하는 알고리즘을 제안하였다. 이를 위해 수학적 배경으로는 리터럴 함수와 리드 뮬러 확장에 대해 논의하였으며, 본 논문의 근간인 모서리 확장 그래프의 도출에 대해 논의하였다. 또한, 모서리 확장 그래프로부터 임의의 m치 n변수의 축약된 함수구성을 도출하는 알고리즘을 제안하였으며 이를 예에 적용하여 그 타당성을 보였다. 제안된 알고리즘의 규칙성을 고려하여 동일부분을 모듈화함으로써 일반성을 가짐을 보였다.

• 전자공학회논문지 IE
• /
• 제47권2호
• /
• pp.1-7
• /
• 2010

이 논문에서는 PLL에 기반한 주파수 합성기의 구현에 있어서 전력 소모를 줄이기 위한 저전력 디지털 PLL의 구조 및 설계에 대하여 기술한다. 제안된 구조의 디지털 PLL에서는 초기 주파수 비교를 위하여 광대역 디지털 로직 직교상관기를 사용 하고, 최종 주파수 비교를 위하여 저전력 특성을 갖는 협대역 디지털 로직 직교상관기를 사용하여 디지털 제어 발진기의 주파수가 제어되도록 하였다. 또한 동작하지 않는 디지털 블록의 전력을 최소화하는 회로 기법을 적용함으로써 대기 전력 소모를 추가적으로 줄일 수 있도록 하였다. 제안된 디지털 PLL의 동작 및 저전력 특성은 MOSIS 1.8V $0.35{\mu}m$ CMOS 공정 조건에서 MyCAD를 이용한 설계 및 모의실험을 통해 검증하였으며, 20% 정도의 전력 소모 감소 효과를 확인하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권1호
• /
• pp.1-10
• /
• 2010

This paper proposes a two-phase clocked adiabatic static CMOS logic (2PASCL) circuit that utilizes the principles of adiabatic switching and energy recovery. The low-power 2PASCL circuit uses two complementary split-level sinusoidal power supply clocks whose height is equal to $V_{dd}$. It can be directly derived from static CMOS circuits. By removing the diode from the charging path, higher output amplitude is achieved and the power consumption of the diode is eliminated. 2PASCL has switching activity that is lower than dynamic logic. We also design and simulate NOT, NAND, NOR, and XOR logic gates on the basis of the 2PASCL topology. From the simulation results, we find that 2PASCL 4-inverter chain logic can save up to 79% of dissipated energy as compared to that with a static CMOS logic at transition frequencies of 1 to 100 MHz. The results indicate that 2PASCL technology can be advantageously applied to low power digital devices operated at low frequencies, such as radio-frequency identifications (RFIDs), smart cards, and sensors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.784-787
• /
• 1999

The 74LS49 and 74LS47 chips are MSI circuits and are used for decoding the BCD input and driving seven-segment displays. The logic of these chips are often used not only as component chips in the commercial digital systems, but are used as library components in fairly complicated ASIC designs. Thus, the understanding of the logic characteristics of these chips is beneficial for future applications. It was analyzed reversely that the design of these chips includes a special logic minimization technique, which neither documented nor reported. This paper is to analyze the function of the logic and the special minimization technique adapted in the design of 74LS49 and 74LS47 chips.

• 전자공학회논문지A
• /
• 제33A권6호
• /
• pp.206-219
• /
• 1996

This paper describes a data structure and evaluation algorithm to improve the perofmrances MOS logic-with-timing simulation in computation and accuracy. In order to efficiently simulate the logic and timing of driver-load networks, (1) a tree data structure to represent the mutual interconnection topology of switches and nodes in the driver-lod network, and (2) an algebraic modeling to efficiently deal with the new represetnation, (3) an evaluation algorithm to compute the linear resistive and capacitive behavior with the new modeling of driver-load networks are developed. The higher modeling presented here supports the structural and functional compatibility with the linear switch-level to simulate the logic-with-timing of digital MOS circuits at a mixed-level. This research attempts to integrate the new approach into the existing simulator RSIM, which yield a mixed-klevel logic-with-timing simulator MIXIM. The experimental results show that (1) MIXIM is a far superior to RSIM in computation speed and timing accuracy; and notably (2) th etiming simulation for driver-load netowrks produces the accuracy ranged within 17% with respect ot the analog simulator SPICE.

• 전자공학회논문지A
• /
• 제31A권2호
• /
• pp.75-80
• /
• 1994

AlAs/GaAs/AlAs RTDs(Resonant Tunneling Diodes) are fabricated and current-voltage properties of them are measured. At room temperature, peak to valley ratio is 2.4 NOT.AND.OR logic gates and Flip-Flop are fabricated using the bistable characteristics of RTDs. Although NOT.AND.OR logic gates need 5~8 transistors. only one RTD is sufficient to fabricate the logic gates. Since the switching time is very short(<10$^12$sec), it is possible to drive the semiconductor circuits fast and integrate them very large. And it is convinced the possibility of integrating RTDs to multilevel logic circuits by observing two peaks of similar current in the serial connection of two RTDs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.601-604
• /
• 2002

In this paper, the timing do-skew modeling for a high speed logic tester channels is developed. The time delay of each channel in a logic tester are different from other channels and it can produce timing error in a test. To get the best timing accuracy in the test with a logic tester, the timing skew must be compensated. The timing skew of channels is due to the difference of time delay of pin-electronics devices composing channels and length of metal line placed on PCB. The expected timing difference of channels can be calculated according to the specifications of pin electronics devices and strip line modeling of PCB. With the calculated delay time, the timing skew compensation circuit has been designed. With the timing skew compensation circuit, the timing calibration of a logic tester can be peformed easily and automatically without other time measuring instruments. The calibration method can then be directly applied to logic testers in mass production lines.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 학술대회 논문집 전문대학교육위원
• /
• pp.58-61
• /
• 2001

The purpose of this paper is a fuzzy logic controller for XY positioning system. The overall control system consists of three parts, the position controller, the speed controller, the fuzzy logic controller. Precise tracking is achieved by fuzzy logic controller. In practice, such systems contain many uncertainties. Therefore, the XY positioning system must receive and evaluate the motion of all axis for a better contouring accuracy. Cross coupled controller utilizes all axis position error information simultaneously to produce accurate contours. However, the existing Cross coupled controllers cannot overcome friction, backlash and parameter variation. So, we propose a fuzzy logic controller of XY positioning system. Experimental results show that the proposed fuzzy logic controller is effective to improve the contouring accuracy of XY positioning system.

• 제어로봇시스템학회논문지
• /
• 제12권12호
• /
• pp.1249-1255
• /
• 2006

This paper presents a constant power control logic for perfect starting a microtubine in vehicle. Under extremely low temperature, performance of the start-up system is severely dropped than that of room temperature because of increasing of load of mechanical parts including engine core and drop of the lead-acid battery capacity. Unfortunately, performance drop of lead-acid battery makes severe problems that cause a malfunction of fuel and lubrication system and power fail of digital devices. So we propose the new start-up logic by constant output power control of lead-acid battery using PWM inverter controller for preventing above problems and keeping good performance of start-up system for microturbine. Also, we prove usefulness of new start-up logic through experimental results under $-32^{\circ}C$ ambient temperature.