• Journal of Power Electronics
• /
• 제14권4호
• /
• pp.796-805
• /
• 2014

A digital controller with a low-power approach for point-of-load synchronous buck converters is discussed and compared with its analog counterpart to confirm its feasibility for system integration. The tri-mode digital controller IC in $0.35{\mu}m$ CMOS process is presented to demonstrate solutions that include a PID, quarter PID, and robust RST compensators. These compensators address the steady-state, stand-by, and transient modes according to the system operating point. An idle-tone free condition for ${\Sigma}-{\Delta}$ DPWM reduces the inherent tone noise under DC-excitation. Compared with that of the traditional approach, this condition generates a quasi-pure modulation signal. Experimental results verify the closed-loop performances and confirm the power-saving mechanism of the proposed controller.

• 한국ITS학회 논문지
• /
• 제12권3호
• /
• pp.1-10
• /
• 2013

지금 사용되는 제어기의 제어방식은 220V 고전압을 일대 일로 직접 신호등에 전달하는 스위치방식이다. 이 방식은 감전위험, 누설전류, 보행공간 침해, 미관 저하 등 많은 단점이 있다. 이에 따라 교통신호기의 제어방식이 디지털로 전환되는 노력이 이루어지고 있으며, 신호등과 신호기와의 디지털 통신 체계가 그 핵심으로 부상하고 있다. 본 논문은 이러한 디지털방식의 신호제어를 위해 필요한 통신체계를 개발하고자 하였다. 이를 위해 먼저 신호등을 포함한 다양한 신호기 주변장치와 특별한 메시지에 대하여 CAN 식별자(ID)를 할당하였다. 또한 이 할당된 식별자(ID)기반으로 신호등에 대한 제어정보를 전달하고 제어상태 피드백을 수집하는 CAN 기반 신호제어 프로토콜을 구성하였다. 이 통신체계의 검증을 위해 소프트웨어 모의실험시스템을 제작하여 신호제어에 활용 가능함을 검증하였다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권2호
• /
• pp.184-189
• /
• 2014

In this paper, a new design method of vibration suppression controller for multi-inertia (especially, 3-ineritia) resonance systems is proposed. The controller consists of a digital fuzzy controller for speed loop and a digital PI controller for current minor loop. The three scaling factor of the fuzzy controller and two PI controller gains are determined by Differential Evolution (DE). The DE is one of optimization techniques and a kind of evolutionary computation technique. In this paper, we have applied the DE/rand/1/bin strategy to design the optimal controller parameters. Comparing with the conventional design algorithm, the proposed method is able to shorten the time of the controller design to a large extent and to obtain accurate results. Finally, we confirmed the effectiveness of the proposal method by the computer simulations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1209-1211
• /
• 2001

Generally, the current controller is located inner the whole controller, so the characteristic of the current controller is important in controlling performance of the upper controller. A current control loop in motor control is designed so that it is 10 times faster than the speed control loop of the upper controller. Thus, the current controller with complex control algorithm is not proper. In this paper, the improved current controller using a conventional digital PI controller and feedforward controller for the brushless BC motor is designed.

• 제어로봇시스템학회논문지
• /
• 제12권3호
• /
• pp.227-232
• /
• 2006

In this paper, we propose a systematic method for intelligent digital redesign of a fuzzy-model-based controller for continuous-time nonlinear system which may also contain system uncertainties. The continuous-time uncertain TS fuzzy model is first contructed to represent the uncertain nonlinear system. A parallel distributed compensation(PDC) technique is then used to design a fuzzy-model-based controller for both stabilization. The designed continuous-time controller is then converted to an equivalent discrete-time controller by using a globally intelligent digital redesign method. This new technique is designed by a global matching of state variables between analog control system and digital control system. This new design technique provides a systematic and effective framework for integration of the fuzzy-model-based control theory and the advanced digital redesign technique for nonlinear systems with uncertainties. Finally, Chaotic Lorenz system is used as an illustrative example to show the effectiveness and the feasibility of the developed design method.

• 전기전자학회논문지
• /
• 제16권4호
• /
• pp.343-348
• /
• 2012

본 논문에서는 Digital PFC Controller에 적합한 11비트 100KS/s의 Algorithmic ADC를 설계하였다. 설계한 Algorithmic ADC는 PFC controller에 적합한 11비트 해상도를 만족하면서 반복적인 순환구조의 동작으로 인해 전체 크기를 줄일 뿐 아니라 소비 전류를 최소화 할 수 있다. 본 논문의 Algorithmic ADC는 0.18um 1Poly-3Metal의 CMOS 공정으로 제작 되었으며 100KS/s의 동작 속도에 SNDR 66.7dB, ENOB 10.78비트의 성능을 가진다. 또한 소비전류는 5V 전원 전압에서 780uA이며 설계된 ADC의 칩 면적은 $0.27mm^2$이다.

• 전력전자학회논문지
• /
• 제12권4호
• /
• pp.339-345
• /
• 2007

본 논문에서는 FPGA(Field Programmable Gate Array) 기반의 전류 제어기를 설계하고 구현하였다. 기존의 DSP(Digital Signal Processor) 기반의 전류 제어기는 알고리즘 연산으로 인해 일반적으로 한 샘플링의 디지털 시지연이 발생한다. 반면에, FPGA 기반의 전류제어기는 FPGA의 높은 연산 능력을 이용하여, 알고리즘 연산에 필요한 시지연을 감소시킬 수 있다. 이로 인해 시지연이 물리적으로 줄기 때문에, 어떠한 시지연 보상 알고리즘 없이 전류 제어기의 대역폭을 향상시킬 수 있다. 구현된 FPGA 기반 전류 제어기의 성능은 실험을 통해 검증되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1671-1676
• /
• 1991

Direct digital design of computed torque controllers for a robot manipulator is discussed in this paper. A simple discrete-time model of the robot manipulator obtained by Euler's method is used for the design. Taking account of computation delay in the digital processor, we propose predictor-based designs of the PD and PID type controllers. The PID type controller is designed based on a modified version of the discrete-time integral controller proposed by Mita. For both controllers, the same formulas can be used to determine the feedback gains. A simulation example is presented to compare the robustness of the proposed controllers against physical parameter variations.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.466-471
• /
• 1996

This work is concerned with the development of digital contouring controller formulti-axial servosystems. Digital optimal contouring controller is proposed to coordinate each of the controllers of multiple feed drives and specifically improve the controuring performance. The optimal control formulation includes the contour error explicity in the performance index to be minimized. The contouring control is exercised for straight line and circular contours. Substantial improvement in contouring perfomance is obtained for a range of contouring conditions. Both steady state and transient error measures have been considered. The simulation study presented has estiblished the potential of the proposed controller to improve contourning perfomance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.293-298
• /
• 1995

A digital preview controller is designed for tandem cold mills to achieve a better improvement of the thickness accuracy. And simultaneously a blocked noniteracting controller is synthesized for rejecting the interactive effects among adjacent stands and for controlling independently each roll stand of landem cold mills. The performance effects and characteristics of the suggested roll control system are discussed in the practical view points. The simulation results show that the thickness accuracy of tandem cold mills can be largely improved by the blocked noninteracting and digital preview contoller.