• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.50_51
• /
• 2009

This paper describes the novel real-time embeded Dynamic System Monitor(KDSM) for dynamic device modeling and disturbace monitoring. The KDSM uses the variable resampling technique together with DFT algorithm so that it overcomes the shortcomings of the existing DFT algorithm at the big deviation of network frequency. The suggested algorithm is implemented by using the NI-PXI system, and verified by applying to the generator testing.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.346-350
• /
• 1996

This paper presents a Neural Network Identification (NNI) method for modeling of highly complicated nonlinear and time varing human system with a pneumatically driven mock circulation system of Left Ventricular Assist Device(LVD). This system consists of electronic circuits and pneumatic driving circuits. The initation of systole and the pumping duration can be determined by the computer program. The line pressure from a pressure transducer inserted in the pneumatic line was recorded. System modeling is completed using the adaptively trained backpropagation learning algorithms with input variables, Heart Rate(HR), Systole-Diastole Rate(SDR), which can vary state of system, and preload, afterload, which indicate the systemic dynamic characteristics and output parameters are preload, afterload.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.1 no.3
• /
• pp.189-192
• /
• 2001

A simple metal-insulator-metal (MIM) capacitor in a standard $0.25{\;}\mu\textrm{m}$ digital CMOS process is described. Using all six interconnect layers, this capacitor exploits both the lateral and vertical electrical fields to increase the capacitance density (capacitance per unit area). Compared to a conventional parallel plate capacitor in the four upper metal layers, this capacitor achieves lower parasitic substrate capacitance, and improves the capacitance density by a factor of 4. Measurements and an extracted model for the capacitor are also presented. Calculations, model and measurements agree very well.

• Journal of information and communication convergence engineering
• /
• v.4 no.3
• /
• pp.108-110
• /
• 2006

Film bulk acoustic resonators for radio frequency wireless applications are presented. Various simulations and modeling were carried out. The impedance of a five-layered FBAR showed almost the same trend of the wideband characteristics as that of an ideal FBAR, but the characteristics of the higher modes appear to be much more suppressed. In addition, the wideband impedance decreased with increasing device size. The resonance characteristics depend strongly on the physical dimensions.

• Annual Conference of KIPS
• /
• 2012.11a
• /
• pp.814-817
• /
• 2012

It has to secure the reliability for the propagation performance in the physical layer of the products for comprising system in order to satisfy the service quality. The radiowave environment under the actual service circumstance is measured. By using the channel model which models and which it obtains, the performance about the access device tries to be tested under the laboratory environment and there is the object of channel modeling.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.6
• /
• pp.1065-1070
• /
• 2009

This paper presents the new technique of modeling using Dynamic Link Library(DLL) in ElectroMagnetic Transients Program - Restructured Version(EMTP-RV) in which we have simplified the procedures of OverCurrent Relay(OCR) modeling. The DLL function is designed to allow EMTP-RV users to develop advanced program model modules and interface them directly and intimately with the EMTP-RV engine. The modeled OCR is verified by simulating the various fault cases in the distribution system. Also, the performance for the modeling of OCR using DLL is compared with that of the method using the control components of EMTP-RV and using EMTP/MODELS. The results show the validity of modeled OCR and the effectiveness of the method using DLL function.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.5
• /
• pp.1163-1168
• /
• 2013

In this paper, Adaptive Neuro-Fuzzy Inference System (ANFIS) is applied for modeling and simulation of DC characteristic of cylindrical Silicon Nanowire Transistor (SNWT). Device Geometry parameters, terminal voltages, temperature and output current were selected as the main factors of modeling. The results obtained are compared with numerical method and a good match has been observed between them, which represent accuracy of model. Finally, we imported the ANFIS model as a voltage controlled current source in a circuit simulator like HSPICE and simulated a SNWT inverter and common-source amplifier by this model.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.16 no.2
• /
• pp.24-34
• /
• 1979

In this paper characteristics of the Ebers-Mull , charge control and Linvill iumped models are reviewed. A 1%eery for systematically modeling solid state device by F.A Lind helm and D. J. Hamilton is discussed in detail. Nonlinear and linear modeds for the junction field effect transistor are derived from the systematic modeling theory. Computer program for the transient analysis is develooped and application of the program to the RC amplifler shows guod results.

• Journal of Multimedia Information System
• /
• v.2 no.2
• /
• pp.223-232
• /
• 2015

In this system, mobile devices are not independent, they can communicate with each other, one device's change can affect the whole system or other devices. To achieve the above mentioned A Self-Reconfigurable System of Contents, through discover the device and connect process, to establish the connection between the mobile devices. After user assigns two dimension display type, the user can select content to input the system, contents are portioning and broadcast to devices. The system can self-reconfigure contents rapidly and exactly. This technique supports contents self-reconfiguration for devices remove, addition and position exchange. In this paper, when the user uses the hand contacts device, the device sends a signal to assist the system to detection device's position. The system does not need to get accurate devices moving direction, just according to all changed devices position to judge where the devices destination is. This research develops an application according to this technique, and the real machine tests the application using Android platform. Some communication protocols and mathematical modeling methods are proposed. These methods can also be used in other Internet of Things (IoT) fields, such as Drones Navigation, Smart Home, and Informational City management.

• The Journal of Information Systems
• /
• v.25 no.2
• /
• pp.27-50
• /
• 2016

Purpose The purpose of this study is to examine the effect of the acceptance intention towards healthcare wearable device in Korea. Specifically, this study attempted to identify the relationships among the acceptance intention towards healthcare wearable device, technical characteristics and user's personal characteristic based on UTAUT(Unified Theory of Acceptance and Use of Technology) model. Design/methodology/approach For this purpose of research, we conducted against consumers who use the wearable devices and we collected data from 219 wearable device users. The analyses were conducted using SPSS and AMOS19.0 which is powerful structural equation modeling (SEM) software. Findings The main findings are as followed; First, functional diversity, wearability, trend sensitivity and health perception are significantly related to performance expectancy, while visual aesthetic and enjoyment are not significantly related. Second, performance expectancy and effort expectancy are significantly related to acceptance intention towards healthcare wearable device. Third, effort expectancy is significantly related to performance expectancy.