• 제목/요약/키워드: Dental procedure

검색결과 925건 처리시간 0.025초

섬유 강화 포스트와 코어 축성 방법에 따른 파절 강도에 관한 비교 (Comparison on the Fracture Strength Depending on the Fiber Post and Core Build-up)

  • 이자형;신수연
    • 구강회복응용과학지
    • /
    • 제25권3호
    • /
    • pp.225-235
    • /
    • 2009
  • 최근 심미 치과 수복이 발달하게 되면서 치은 연상 변연을 가진 전부 도재 수복물을 하게 되는 경우 섬유 강화 포스트는 자연치와 유사한 반투명성을 보여 더욱 심미적으로 보이게 해준다. 섬유 강화 포스트인 석영 섬유 포스트와 유리 섬유 포스트로 수복시 코어 축성 방법을 달리한 5가지 군으로 분류하여 각 방법에 따른 파절강도를 비교하였다. 발치된 45개의 치아를 사용하여 모두 근관치료를 시행하고 CEJ 상방 1mm 부위에서 치축에 수직이 되도록 주수하에 치관부를 절삭하였다. A, B, C군은 #1 D.T. $Light-post^{(R)}$를 사용하였고, D, E군은 #1.5 $LuxaPost^{(R)}$를 사용하였다. A군은 제조사의 지시대로 D.T. $Light-post^{(R)}$와 시멘트로는 $DUO-LINK^{TM}$을 코어로는 $LIGHT-CORE^{TM}$을 사용하였다. B군은 시멘트와 코어로 $DUO-LINK^{TM}$을 포스트 접착 후 코어를 축성하는 이 단계 방법을 사용하였고, C군은 시멘트와 코어로 $DUO-LINK^{TM}$를 사용하면서 포스트 접착과 코어 축성을 동시에 시행하는 일단계 방법을 사용하였다. D군은 시멘트와 코어로 $LuxaCore^{(R)}-Dual$을 이단계 방법으로 축성하고, E군은 일단계 방법으로 축성하였다. ferrule 0mm로 치관을 삭제하여 금속관으로 수복 후 $45^{\circ}$로 기울여 CEJ 하방 2mm 까지 매몰 후 crosshead speed 1mm/min로 파절 강도를 측정하였다. 파절강도는 A, B, D, E, C군 순으로 작은 값을 나타냈으며 통계적 유의성은 없었다. B군에서만 치근 파절이 나타났으며 모두 재수복이 불가능한 파절이었다. 파절 양상은 모든 군에서 코어/치근 파절이 절반 이상 나타났으며, B와 D군에서는 대부분 재수복이 불가능한 파절이었다. 실험에서 나타난 결과로 미루어 섬유 강화 포스트나 코어의 종류 그리고 코어 축성 방법이 치아 파절 강도와는 큰 연관성이 없는 것으로 보인다. 파절 양상을 보면 섬유 강화 포스트를 사용했음에도 불구하고 재수복이 불가능한 경우가 절반 이상 나타났으며, 이단계 방법으로 코어를 축성한 군에서 그 수가 더 많은 것으로 보아 일단계 방법으로 코어를 축성하는 것이 재수복의 가능성을 고려해 볼 때 임상적으로 사용 가능한 효율적인 방법이라고 사료된다.

점막하 Midazolam의 병용투여 시 BIS 분석을 이용한 진정 평가 (SEDATION EVALUATION USING BIS INDEX ASSESSMENT WITH AND WITHOUT THE ADDED SUBMUCOSAL MIDAZOLAM)

  • 이영은;박미경;김소영;김윤희;정상혁;백광우
    • 대한소아치과학회지
    • /
    • 제34권1호
    • /
    • pp.91-98
    • /
    • 2007
  • Chloral hydrate (CH)와 Hydroxyzine의 경구 복용을 이용한 진정과 Midazolam을 점막하 주사로 추가 투여한 진정을 Bispectral(BIS) index를 이용하여 두 진정법의 진정 깊이의 차이를 비교 평가하고자 하였다. 모든 환아는 2세-6세 사이의 미국 마취과학회 신체평가 등급 I의 건강한 환아로 진정 요법이 요구되었으며 국소마취와 최소 2개 이상의 치아에 대한 수복 치료가 치료에 포함되었다. 무작위 방법으로 환아를 CH(60mg/kg)와 Hydroxyzine(1mg/kg)을 복용하는 군과 CH(60mg/kg)와 Hydroxyzine(1mg/kg)을 복용하고 점막하 주사로 Midazolam(0.1mg/kg)을 추가 투여하는 군으로 나누었다. 진정 요법 동안 Nitrous Oxide는 두 군 모두 50%로 유지하였다. 환아 행동 평가는 녹화된 비디오 테이프를 보며 매 2분마다 Behavior scale을 이용하여 quiet(Q), crying(C), movement(M), or struggling(S)으로 측정하였다. 두 군의 진정 깊이 비교 평가를 위해 치료가 시작된 시점부터 40분 동안 2분 간격으로 측정한 Pulse rate(PR), Saturation percentage of $O_2(SpO_2)$, behavior scale과 매 2분 단위로 계산된 평균 BIS index를 t-test와 Levene's test를 이용하여 분석하였다. 두 군의 평균 BIS index와 BIS index의 분포는 유의할 만한 차이를 보였다(P<0.001). 점막하 주사로 Midazolam을 추가 투여한 군에서 평균 BIS index가 더 낮은 값을 가지며 표준 편차가 작았다 PR와 $SpO_2$는 두 그룹 모두 정상범위내의 값을 보였다. 점막하 주사를 이용한 Midazolam의 추가 투여는 안전성을 크게 침해하지 않는 범위 내에서 진정 깊이를 깊게 해주며 안정적인 진정을 이루게 함으로써 보다 바람직한 진정을 유도해 줄 수 있는 것으로 사료된다.

  • PDF

의도적 유치발치술에 의한 이소매복 영구치의 맹출유도 (SPONTANEOUS ERUPTION OF ECTOPIC IMPACTED TOOTH BY INTENTIONAL EXTRACTION OF DECIDUOUS TOOTH)

  • 최인영;김승혜;김성오;최형준;이제호;최병재;손흥규;송제선
    • 대한소아치과학회지
    • /
    • 제38권4호
    • /
    • pp.385-390
    • /
    • 2011
  • 맹출에 관계되는 여러 요소가 부정적으로 작용할 때 맹출장애가 유발될 수 있다. 맹출장애의 일종인 매복이 발생할 경우 주기적인 관찰, 공간확보, 외과적노출, 교정적견인, 외과적노출과 교정적견인의 병행, 발거 후 자가치아이식 등의 방법을 고려할 수 있다. 첫 번째 증례는 9세 남환에서 상악 좌측 측절치의 수평매복을 발견하여 상악 좌측 유측절치 및 유견치를 발거 후 5개월 뒤 개창술(window opening)을 시행한 증례로, 8개월의 정기검진시 치아가 부분맹출 하였으며 18개월 후 매복된 상악 좌측 측절치가 치축이 개선되며 자발적으로 맹출하였다. 두 번째 증례는 10세 남환에서 상악 우측 제1소구치의 이소매복을 발견하여 상악 우측 제 1 유구치를 발거한 증례로, 10개월 뒤 치아가 부분맹출하였으며 19개월 후 매복된 상악 우측 제1소구치가 자발적으로 맹출하였다. 본 증례들에서 이소매복된 영구치는 맹출경로에 있는 유치의 의도적 발거 후 경과관찰을 한 결과 맹출 위치의 개선 및 자발적 맹출이 유도되었기에 보고하는 바이다.

도재 수복물 합착시 상아질 접착 술식이 레진 시멘트의 전단결합강도에 미치는 영향 (An effect of Dentin Bonding Procedure on the Shear Bond Strength of Resin Cement to Porcelain Restoration)

  • 강혜진;신수연
    • 구강회복응용과학지
    • /
    • 제28권1호
    • /
    • pp.67-78
    • /
    • 2012
  • 본 연구에서는 Clearfil$^{TM}$ SEBond와 Adapter$^{TM}$ SingleBond2를 사용하여 즉시 상아질 접착을 하였을 때 지연 상아질 접착을 하였을 때와 비교해 전단결합강도 및 파절 양상을 관찰하였다. 발치된 구치를 네 군으로 나누어 1군은 대조군으로 치아 삭제 직후 시편을 상아질 접착제를 광중합 후 합착하였고 2군과 3군은 치아 삭제 직후 각각 Clearfil$^{TM}$ SEBond와 Adapter$^{TM}$ SingleBond2로 즉시 상아질 접착을 한 후 열 순환기에 교대침수 시키고 상아질 접착제를 광중합하지 않고 합착하였다. 4군은 삭제 후 아무 처리를 하지 않고 열 순환 후 상아질 접착제를 광중합하지 않고 합착하였다. 이후 만능 시험기로 모든 시편의 전단결합강도를 측정하였으며, 광학현미경으로 파절 양상을 관찰하였다. 측정 결과 대조군이 가장 높은 결합력을 보였고 지연 상아질 접착을 시행한 군에서 가장 낮은 결합력을 보였다. Clearfil$^{TM}$ SEBond로 즉시 상아질 접착을 한 군은 대조군과 유의한 차이를 보이지 않았고, 4군보다 유의하게 높은 결합력을 보였다. Adapter$^{TM}$ SingleBond2를 이용하여 즉시 상아질 접착을 한 군은 4군보다 높은 결합력을 보였으나 유의한 차이를 보이지 않았다. 파절 양상에서는 대조군과 2군이 4군에 비해 유의하게 혼합형 파절이 많이 나타났다(p<0.05). 이상의 결과로 보아, 도재 수복물의 합착에 있어서 치아 삭제 후 즉시 상아질 접착제를 적용하는 것이 바람직하다고 사료된다. 하지만 이때 사용되는 상아질 접착제의 선택에 있어서는 실제 임상 조건에서의 더 많은 연구가 필요하리라 사료된다.

타이타늄 임플랜트 시편 내부에 설치한 자석의 자성강도에 따른 골형성 변화 (THE CHANGE OF BONE FORMATION ACCORDING TO MAGNETIC INTENSITY OF MAGNET PLACID INTO TITANIUM IMPLANT SPECIMENS)

  • 황윤태;이성복;최대균;최부병
    • 대한치과보철학회지
    • /
    • 제43권2호
    • /
    • pp.232-247
    • /
    • 2005
  • Purpose. The purposes of this investigation were to discover the possibility of clinical application in the areas of dental implants and bone grafts by investigating the bone formation histologically around specimen which was depending on the intensity of magnetic field of neodymium magnet inside of the specimens. Material and method. 1. Measurement of magnetic intensity - placed the magnet inside of the specimen, and measured the intensity of magnetic field around the 1st thread and 3rd thread of specimen 20 times by using a Gaussmeter(Kanetec Co., Japan). 2. Surgical Procedure - Male rabbit was anesthetised by constant amount of Ketamine (0.25ml/kg) and Rompun (0.25ml/kg). After incising the flat part of tibia, and planted the specimens of titanium implant, control group was stitched without magnet, while experimental groups were placed a magnedisc 500(Aichi Steel Co., Japan) or magnedisc 800(Aichi Steel Co., Japan) into it, fixed by pattern resin and stitched. 3. Management after the surgery - In order to prevent it from the infection of bacteria and for antiinflammation, Gentamycin and Ketopro were injected during 1 week from operation day, and dressed with potadine. 4. Preparation of histomorphometric analysis - At 2, 4 and 8 weeks after the surgery, the animals were sacrificed by excessed Ketamine, and then, specimens were obtained including the operated part and some parts of tibia, and fixed it to 10% of PBS buffer solution. After embedding specimens in Technovit 1200 and B.P solution, made a H-E stain. Samples width was 75$\mu$m . In histological findings through the optical microscope and using Kappa image base program(Olympus Co. Japan), the bone contact ratio and bone area ratio of each parts of specimens were measured and analyzed. 5. Statistical analysis - Statistical analysis was accomplished with Mann Whitney U-test. Results and conclusion. 1. In histomorphometric findings, increased new bone formation was shown in both control & experimental groups through the experiment performed for 2, 4 & 8 weeks. After 4 weeks, more osteoblasts and osteoclasts with significant bone remodeling were shown in experimental groups. 2. In histomorphometric analysis, the bone contact ratios were 38.5% for experimental group 1, 29.5% for experimental group 2 and 11.9% for control group. Experimental groups were higher than control group(p<0.05) (Fig. 6, Table IV). The bone area ratios were 60.9% for experimental group 2, 46.4% for experimental group 1 and 36.0% for control group. There was no significantly statistical difference between experimental groups and control group(p<0.05) (Fig. 8, Table VII) 3. In comparision of the bone contact ratios at each measurement sites according to magnetic intensity, experimental group 2(5.6mT) was higher than control group at the 1st thread (p<0.05) and experimental group 1 (1.8mT) was higher than control group at the 3rd thread(p<0.05) (Fig. 7, Table V, VI). 4. In comparision of the bone area ratios at each measurement sites according to magnetic intensity, experimental group 2(5.6mT) was higher than control group and experimental group 1 (4.0mT) at the 1st thread(p<0.1) and experimental group 2(4.4mT) was higher than experimental group 1 (1.8mT) at the 3rd thread(p<0.1) (Fig. 9, Table IX, X). Experiment group 2 was largest, followed by experiment group l and control group at the 3rd thread of implant. There was a significant difference at the 1st thread of control group & experiment group 2, and at 1st thread & 3rd thread of experiment group 1 & 2, and not at control group experiment group 1.(p<0.1)

백서 두개골 결손부에서 항생제를 함유한 키토산 차단막의 골재생 유도 효과 (The Bone regenerative effects of tetracycline blended chitosan membranes on the calvarial critical size defect in Sprague dawley rats)

  • 채경준;김태균;정의원;이수복;정용식;이용근;김창성;채중규;조규성;김종관;최성호
    • Journal of Periodontal and Implant Science
    • /
    • 제35권4호
    • /
    • pp.1019-1037
    • /
    • 2005
  • The major goals of periodontal therapy are the functional regeneration of periodontal supporting structures already destructed by periodontal disease as well as the reduction of signs and symptoms of progressive periodontal disease. There have been many efforts to develop materials and therapeutic methods to promote periodontal wound healing. There have been increasing interest on the chitosan made by chtin. Chitosan is a derivative of chitin made by deacetylation of side chains. Chitosan has been widely studied as bone substitution and membrane material in periodontology. Many experiments using chitosan in various animal models have proven its beneficial effects. Tetracycline has been considered for use in the treatment of chronic periodontal disease and gingivitis. The aim of this study is to evlauate the osteogenesis of tetracycline blended chitosan membranes on the calvarial critical size defect in Sprague Dawley rats. An 8mm surgical defect was produced with a trephine bur in the area of the midsagittal suture. The rats were divided into five groups: Untreated control group versus four experimental group. Four types of membranes were made and comparative study was been done. Two types of non-woven membranes were made by immersing non-woven chitosan into either the tetracycline solution or chitosan-tetracycline solution. Other two types of sponge membranes were fabricated by immersing chitosan sponge into the tetracycline solution, and subsequent freeze-drying. The animals were sacrificed at 2 and 8 weeks after surgical procedure. The specimens were examined by histologic analyses. The results are as follows: 1. Clinically the use of tetracycline blended chitosan membrane showed great healing capacity. 2. The new bone formations of all the experimental group, non-woven and sponge type membranes were greater than those of control group. But, there was no significant difference between the experimental groups. 3. Resorption of chitosan membranes were not shown in any groups at 2 weeks and 8 weeks. These results suggest that the use of tetracycline blended chitosan membrane on the calvarial defects in rats has significant effect on the regeneration of bone tissue in itself. And it implicate that tetracycline blended chitosan membrane might be useful for guided tissue regeneration.

기성품과 맞춤형 임플란트 지대주 나사의 풀림 토크 비교 (Comparison of removal torque between prefabricated and customized abutment screw)

  • ;김지환;김무성;박영범;심준성
    • 대한치과보철학회지
    • /
    • 제50권4호
    • /
    • pp.243-248
    • /
    • 2012
  • 연구 목적: 본 연구의 목적은 임플란트 지대주 연결에 사용되는 기성품 나사와 맞춤형 나사의 풀림 토크를 비교하는 것이다. 연구 재료 및 방법: 세가지 임플란트 시스템에(Osstem, Astra, Zimmer) 대해 고정체와 지대주의 연결에 기성품 나사군(대조군)과 맞춤형 나사군(실험군)으로 총 6군(n = 6)으로 나누었다. 조임 토크조절은 디지털 토크 측정기를 이용하였으며 각 임플란트 제조사가 추천한 조임 토크 값을 적용하였다. 체결 10분 후 동일한 조임 토크를 다시 적용하고 5분 후에 풀림 토크력을 측정하였다. 이 과정을 10회 반복 측정하였다. 반복 하중 실험에서는 6개 군(n = 3)에 대해 체결 10분 후 2차 조임 토크를 적용하고 $30^{\circ}$ 경사로 50 N 하중으로 총 1,000,000번 반복 하중을 가하였다. 반복 하중 적용 이후 풀림 토크값을 측정하였다. 통계 방법으로는 10회 반복 측정에서 풀림 토크값의 차이를 비교하기 위해 repeated measures of ANOVA test (${\alpha}$=.05)를 사용하였고, 반복 하중 후 풀림 토크값의 차이를 비교하기 위해서 각 시스템별 Independant t-test로 통계 처리하였다. 결과: 모든 군에서 반복 횟수가 증가할수록 풀림 토크값이 유의성 있게 감소하는 것으로 나타났다(P<.05). 10회 반복 측정 실험에서는 세 종류의 임플란트에서 대조군(기성품나사)과 실험군(맞춤형 나사) 간에 풀림 토크값은 유의차가 없었다(P>.05). 반복 하중 실험에서 세가지 시스템에서 대조군과 실험군 간의 풀림 토크력은 유의한 차이가 없었다(P>.05). 결론: 반복 측정된 풀림력 검사와 반복 하중을 적용 후 풀림력 검사에서 맞춤형 나사와 기성품 나사의 풀림력은 유의한 차이가 없었다.

공진 주파수 분석법에 의한 임플랜트의 안정성 측정에 관한 연구 (A STUDY ON THE MEASUREMENT OF THE IMPLANT STABILITY USING RESONANCE FREQUENCY ANALYSIS)

  • 박철;임주환;조인호;임헌송
    • 대한치과보철학회지
    • /
    • 제41권2호
    • /
    • pp.182-206
    • /
    • 2003
  • Statement of problem : Successful osseointegration of endosseous threaded implants is dependent on many factors. These may include the surface characteristics and gross geometry of implants, the quality and quantity of bone where implants are placed, and the magnitude and direction of stress in functional occlusion. Therefore clinical quantitative measurement of primary stability at placement and functional state of implant may play a role in prediction of possible clinical symptoms and the renovation of implant geometry, types and surface characteristic according to each patients conditions. Ultimately, it may increase success rate of implants. Purpose : Many available non-invasive techniques used for the clinical measurement of implant stability and osseointegration include percussion, radiography, the $Periotest^{(R)}$, Dental Fine $Tester^{(R)}$ and so on. There is, however, relatively little research undertaken to standardize quantitative measurement of stability of implant and osseointegration due to the various clinical applications performed by each individual operator. Therefore, in order to develop non-invasive experimental method to measure stability of implant quantitatively, the resonance frequency analyzer to measure the natural frequency of specific substance was developed in the procedure of this study. Material & method : To test the stability of the resonance frequency analyzer developed in this study, following methods and materials were used : 1) In-vitro study: the implant was placed in both epoxy resin of which physical properties are similar to the bone stiffness of human and fresh cow rib bone specimen. Then the resonance frequency values of them were measured and analyzed. In an attempt to test the reliability of the data gathered with the resonance frequency analyzer, comparative analysis with the data from the Periotest was conducted. 2) In-vivo study: the implants were inserted into the tibiae of 10 New Zealand rabbits and the resonance frequency value of them with connected abutments at healing time are measured immediately after insertion and gauged every 4 weeks for 16 weeks. Results : Results from these studies were such as follows : The same length implants placed in Hot Melt showed the repetitive resonance frequency values. As the length of abutment increased, the resonance frequency value changed significantly (p<0.01). As the thickness of transducer increased in order of 0.5, 1.0 and 2.0 mm, the resonance frequency value significantly increased (p<0.05). The implants placed in PL-2 and epoxy resin with different exposure degree resulted in the increase of resonance frequency value as the exposure degree of implants and the length of abutment decreased. In comparative experiment based on physical properties, as the thickness of transducer increased, the resonance frequency value increased significantly(p<0.01). As the stiffness of substances where implants were placed increased, and the effective length of implants decreased, the resonance frequencies value increased significantly (p<0.05). In the experiment with cow rib bone specimen, the increase of the length of abutment resulted in significant difference between the results from resonance frequency analyzer and the $Periotest^{(R)}$. There was no difference with significant meaning in the comparison based on the direction of measurement between the resonance frequency value and the $Periotest^{(R)}$ value (p<0.05). In-vivo experiment resulted in repetitive patternes of resonance frequency. As the time elapsed, the resonance frequency value increased significantly with the exception of 4th and 8th week (p<0.05). Conclusion : The development of resonance frequency analyzer is an attempt to standardize the quantitative measurement of stability of implant and osseointegration and compensate for the reliability of data from other non-invasive measuring devices It is considered that further research is needed to improve the efficiency of clinical application of resonance frequency analyzer. In addition, further investigation is warranted on the standardized quantitative analysis of the stability of implant.

임플랜트 지대주 나사의 텅스텐 카바이드/탄소 코팅이나사풀림에 미치는 영향 (Influence of tungsten carbide/carbon coating of implant-abutment screw on screw loosening)

  • 박재경;정창모;전영찬;윤지훈
    • 대한치과보철학회지
    • /
    • 제46권2호
    • /
    • pp.137-147
    • /
    • 2008
  • 임플랜트 보철물에서 각 구성 요소를 연결하는 나사 풀림 현상이 흔히 발생하고 있다. 나사 풀림을 최소화하기 위해서 연결 구성 부품 사이의 압축력을 최대로 하는 것이 중요한데, 나사 신장의 허용 한계 내에서 조임회전력을 증가시켜 나사 내부의 인장력 즉 전하중을 극대화하기 위해서는 마찰 계수를 감소시켜 초기 조임회전력의 손실을 최소화해야 한다. 건조 윤활제를 나사 표면에 코팅한 나사들이 전하중을 증가시키고 나사 풀림을 감소시키나 나사의 반복체결에 따른 코팅표면의 마모가 문제점으로 지적되고 있다. 최근 내마모성이 우수하며 동시에 나사의 마찰 저항을 최소화할 수 있는 텅스텐 카바이드/탄소 코팅을 이용한 나사가 임상에 사용되고 있으나 실제적으로 연결부 안정성에 미치는 영향에 관한 연구는 미미한 편이다. 이에 본 연구에서는 external butt joint 형태를 가지는 US II 시스템과 one stage용 8도의 internal cone 연결형태의 SS II 시스템 및 11도의 internal cone 연결형태의 GS II 시스템에서 티타늄 합금 나사의 텅스텐 카바이드/탄소 코팅이 지대주 나사 풀림에 미치는 영향을 알아보기 위하여 100만 회 반복 하중 전후의 풀림회전력 및 상실률을 비교한 결과 다음과 같은 결론을 얻었다. 1. 초기 풀림회전력은 티타늄 합금나사보다 텅스텐 카바이드/탄소 코팅 나사를 사용한 경우 작게 나타났으며 (P<.01), 동일 나사를 사용한 경우에는 임플랜트 시스템 간에 차이가 없었다 (P>.05). 2. 반복하중에 따른 풀림회전력의 상실률은 두 나사 모두에서 external butt joint 형태의 US II 시스템이 internal cone 연결형태의 SS II 와 GS II 시스템 보다 크게 나타났으나, SS II 와 GS II 시스템 사이에는 차이를 보이지 않았다 (P<.01). 3. 텅스텐 카바이드/탄소 코팅 나사를 사용한 경우 티타늄 합금 나사에 비해 모든 시스템에서 반복하중 후 풀림회전력 상실률이 작게 나타났으며 (P<.01), 코팅 나사 사용으로 인한 상실률의 감소차는 임플랜트 시스템 간에 차이를 보이지 않았다 (P>.05).

두 종의 external hex implant의 변연골 흡수에 관한 연구 : 예비연구 (preliminary study) (Radiographic evaluation of marginal bone resorption around two types of external hex implants : preliminary study)

  • 이지은;허성주;곽재영;김성균;한종현
    • 대한치과보철학회지
    • /
    • 제46권2호
    • /
    • pp.169-174
    • /
    • 2008
  • 목적: 치과 임플랜트 주위의 변연골 변화는 임플랜트의 기능적인 유지 뿐만 아니라 심미적 성공을 위해서도 중요하다. 변연골의 유지를 위한 임플랜트 디자인이 연구되고 있다. 이번 예비 연구는 두 종류의 external hex implant 시스템에서 임플랜트의 상부 미세 나사산이 변연골 변화량에 미치는 영향을 평가하고자 한다. 재료 및 방법: 총 24명의 환자를 대상으로 $Br{{\aa}}nemark$ 임플랜트 식립군 (1군, 거친 표면 임플랜트, 20개)과 원플란트 임플랜트 식립군 (2군, 미세나사산을 가진 거친 표면 임플랜트, 20개)으로 분류하였다. 기준 시점 (임플랜트 부하)과 부하를 가한 1년 뒤 임상적, 방사선학적 검사를 시행하였다. UTHSCSA Image Tool을 이용하여 임플랜트-보철 경계부로부터 변연골 높이 변화량으로 계측하였다. 계측치는 SAS 프로그램을 이용하여 three-level ANCOVA로 통계처리 하였다. 결과: 기준 시점과 비교하여 1년 기능 후, 두 그룹 간의 변연골 소실 변화량에 있어서 통계학적으로 유의한 차이가 있었다 (P<0.05). 1군의 평균 변연골 높이 변화량은 $0.83{\pm}0.31mm$, 2군에 있어서는 $0.44{\pm}0.36mm$ 이었다. 미세나사산을 가진 거친 표면 임플랜트가 미세나 사산을 가지지 않은 거친 표면 임플랜트 보다 더 적은 변연골 소실 변화량을 보였다. 결론: 미세나사산을 가진 거친 표면 임플랜트가 기능적 부하 후 변연골 높이를 유지하는데 있어 더 유리한 디자인으로 보인다.