• 제목/요약/키워드: D-phase

검색결과 6,552건 처리시간 0.037초

PBG를 이용한 Oscillator의 Phase Noise Reduction에 관한 연구 (A Study on Phase noise Reduction Technique in Oscillator Using PBG)

  • 오익수;서철헌
    • 대한전자공학회논문지TC
    • /
    • 제42권1호`
    • /
    • pp.99-103
    • /
    • 2005
  • 본 논문에서는 광전자 밴드갭의 공진 특성을 이용하여 마이크로웨이브 발진기에서 위상잡음을 줄이기 위한 새로운 구조를 제시하였다. 낮은 Q값을 가지고 있는 마이크로스트립 라인 공진기의 접지 면에 PBG 구조를 적용하였다. 그래서 2.4 GHz 대역의 100 KHz offset에서 기존의 마이크로스트립 라인 발진기의 위상잡음 특성에 비해 약 10 dBc 개선시킨 결과를 얻었다. 출력전력은 7.09 dBm을 획득하였다.

A Low-Spur CMOS PLL Using Differential Compensation Scheme

  • Yun, Seok-Ju;Kim, Kwi-Dong;Kwon, Jong-Kee
    • ETRI Journal
    • /
    • 제34권4호
    • /
    • pp.518-526
    • /
    • 2012
  • This paper proposes LC voltage-controlled oscillator (VCO) phase-locked loop (PLL) and ring-VCO PLL topologies with low-phase noise. Differential control loops are used for the PLL locking through a symmetrical transformer-resonator or bilaterally controlled varactor pair. A differential compensation mechanism suppresses out-band spurious tones. The prototypes of the proposed PLL are implemented in a CMOS 65-nm or 45-nm process. The measured results of the LC-VCO PLL show operation frequencies of 3.5 GHz to 5.6 GHz, a phase noise of -118 dBc/Hz at a 1 MHz offset, and a spur rejection of 66 dBc, while dissipating 3.2 mA at a 1 V supply. The ring-VCO PLL shows a phase noise of -95 dBc/Hz at a 1 MHz offset, operation frequencies of 1.2 GHz to 2.04 GHz, and a spur rejection of 59 dBc, while dissipating 5.4 mA at a 1.1 V supply.

이중 위상고정루프 구조를 갖는 PLDRO 설계 및 제작 (The Design and Implementation of PLDRO(Phase Locked Dielectric Resonator Oscillator) Using Dual Phase Lock Loop Structure)

  • 김현진;김용환;민준기;유형수;이형규;홍의석
    • 한국ITS학회 논문지
    • /
    • 제3권2호
    • /
    • pp.69-74
    • /
    • 2004
  • 본 논문에서는 MMC(Microwave Micro Cell)장비와 ITS용 무선장비에 사용될 수 있는 PLDRO를 설계하였다. 일반적인 PLDRO구조에 이중루프구조를 이용해 위상을 고정하였다. 제안된 이중루프구조 PLDRO의 측정결과 주파수 18.7GHz에서 0dBm의 출력레벨과 기준주파수에서 1kHz 떨어진 지점에서 -804Bc/Hz, 10kHz에서 -83dBc/Hz의 위상잡음 특성을 얻었다.

  • PDF

X 대역 소형 디지털 위상 천이기 설계 (X-band Compact Digital Phase Shifter Design)

  • 엄순영;전순익;육종관;박한규
    • 한국전자파학회논문지
    • /
    • 제13권9호
    • /
    • pp.907-915
    • /
    • 2002
  • 본 논문에서는 위성 통신용 능동 위상 배열 안테나 시스템에 적용할 소형 디지털 위상 천이기 구조를 제안하였다. 포개진 브랜치라인 하이브리드를 기본 소자로 사용하는 반사형 위상 천이기 구조로서 우모드 및 기모드 해석 방법을 사용하여 이론적인 해석 및 설계 변수들을 유도하였다. 또한, 제안한 구조의 전기적인 성능을 실험적으로 확인하기 위하여, 유전율이 2.17인 테프론 기판을 사용하여 X 대역 4비트 위상 천이기를 설계, 제작하였다. 제작된 회로의 크기는 3.5 cm $\times$ 3.0 cm보다 작았으며, 기존의 비결합 구조에 비하여 적어도 50 % 이상의 크기 절감을 가져왔다. 제작된 위상 천이기의 실험 결과는 7.9 - 8.4 GHz 동작 대역내에서 평균 삽입 손실 및 삽입 손실 변화가 각각 3.5 dB, $\pm$ 0.6 dB이하였으며, 입출력 반사 손실은 10 dB 이상이었다. 또한, $\pm$3$^{\circ}$의 rms 위상오차 범위 내에서 원하는 4비트 위상 특성 변화를 보여주었다.

DBS 수신을 위한 Dual Phase LNB 설계 (The Design of Dual Phase LNB for DBS Receiving)

  • 임윤두;고봉진
    • 한국항행학회논문지
    • /
    • 제6권3호
    • /
    • pp.188-194
    • /
    • 2002
  • DBS(Direct Broadcasting Satellite)는 광범위한 주사영역과 고품질의 서비스를 제공하므로 정보화 사회에서 매우 유용한 매체로 활용되고 있으며 이동체에서도 위성 방송을 수신할 수 있는 기술을 필요로 한다. 본 논문에서는 한반도 연근해를 항해구역으로 하는 선박과 육상 이동체에서 DBS 수신이 가능한 trracking antenna용 Dual phase LNB를 설계하였다. 설계한 Dual phase LNB는 저잡음 증폭기 대역통과 필터 발진기, 혼합기, 중간주파 증폭기로 구성하였고 위치 추적을 위해 각각 두 입 출력 위상을 동위상으로 구현하였다. 측정 결과, 11.7 GHz~12.2 GHz의 입력신호에 대하여 잡음지수는 0.87 dBmax, 변환이득 62 dB이고, 온도특성은 $-30^{\circ}C{\sim}60^{\circ}C$에서 ${\pm}400$ kHz이고 위상잡음은 100 kHz 옵셋에서 -101 dBc/Hz로서 우수한 성능을 나타내었다.

  • PDF

다중 층 화장료에서 수성 이상계의 응용 (Applying Aqueous Two Phase Systems to Multi-layer Cosmetics)

  • 홍준기;유재원;유장영;남승옥;이상길;표형배
    • 대한화장품학회지
    • /
    • 제39권2호
    • /
    • pp.83-88
    • /
    • 2013
  • 수성 이상계는 물에 친수 성분만을 용해시킨 후 용해 물질들 사이에 유발되는 단순한 물리적 불친화성에 의해 액상 다중 층으로 분리되기 때문에 생체적합성에 대한 장점을 가지고 있다. 본 연구에서는 물에 친수 성분만을 용해시킨 후 두 층으로 분리되는 수성 이상계 상분리 원리를 수성 다중 층 액상 화장료에 응용하여 수성 다중 층 화장료에 적용이 가능한 대표적인 두 종의 수성 이상계를 선정하였으며, 이들에 대해 바이노달 곡선과 임계점 및 농도 대응선 그리고 새로운 개념의 상분리 부피 및 상분리 시간 대응곡선을 포함하는 상도를 실험을 통해 작성하였으며, 상 도표로부터 액상 다중 층으로 분리되는 최적의 조건을 관찰할 수 있었다.

4D CAD와 GIS의 통합시스템을 통한 프로젝트 단계별 리스크관리 모델에 관한 연구 (A Study on 4D CAD and GIS Integrated System for Process Risk Management Model)

  • 전승호;윤석헌;백준홍
    • 한국건축시공학회지
    • /
    • 제7권3호
    • /
    • pp.91-98
    • /
    • 2007
  • Recently a construction industry introduces information that brings about many advantages in the early planning phase, design phase and construction phase. Especially it replaces 2D, 3D systems(usually using explanation of drawing information) ai 4D CAD(offering a sort of 4D-having relation of construction schedule and 3D drawing information). Nevertheless a 4D has these benefits, it has limits which are not only usually using 3D modeling but also limit of making full use of practical affairs because of a lack of connecting varietals of progress of work. To solve these uppermost limits, this research is presenting unified systems to use in risk management which are efficient management of space and non-space information, space analysis, making full use of data base, introducing GIS system of easy interaction.

Effects of Dietary Lysine and Energy Levels on Growth Performance and Apparent Total Tract Digestibility of Nutrients in Weanling Pigs

  • Kim, Y.W.;Ingale, S.L.;Kim, J.S.;Kim, K.H.;Chae, B.J.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제24권9호
    • /
    • pp.1256-1267
    • /
    • 2011
  • Two experiments were conducted to determine the effects of dietary lysine and energy level on performance and apparent total tract digestibility (ATTD) of nutrients in weanling pigs. In Exp. 1, a total of 288 weaned pigs (initial BW $5.77{\pm}0.85\;kg$) were randomly allotted to 4 treatments (4 replicates per treatment with 18 pigs in each replicate). Experimental diets were fed in the 3 phases: phase I (d 0 to 7), phase II (d 8 to 14) and phase III (d 15 to 28). Isocalorific diets (3,450 kcal/kg) with incremental lysine levels (Phase I: 1.51, 1.61, 1.71 and 1.81; Phase II: 1.35, 1.46, 1.56 and 1.66; Phase III: 1.18, 1.28, 1.39 and 1.49% lysine respectively for T1, T2, T3 and T4) were used as treatments. An increase in the dietary lysine levels linearly improved (p<0.05) the ADG and G:F during phases I, II and III as well as overall study period. The ATTD of DM (d 7 and 28) and CP (d 7, 14 and 28) were linearly improved (p<0.05) with increasing dietary lysine levels. ATTD of ash, Ca and P were not affected by dietary lysine level. In Exp. 2, 64 weanling pigs (initial BW $4.79{\pm}0.79\;kg$) were randomly allotted to 4 treatments (4 replicates per treatment with 4 pigs in each replicate) in a $2{\times}2$ factorial arrangement on the basis of BW. Effects of two levels of energy (high, 3,450 or low, 3,350 kcal/kg) and lysine (high or low; 1.70 or 1.50, 1.55 or 1.35 and 1.40 or 1.20% in phase I, II and III diets, respectively) on performance and ATTD of nutrients were investigated. High energy and lysine diets improved ADG (p<0.05) in pigs during phase I, II and III and overall period (p<0.001), while G:F increased (p<0.05) during phase I and overall period. Pigs fed high lysine diets consumed more (p<0.05) feed during phase III and overall period. Additionally, pigs fed high energy diets had greater (p<0.05) ATTD of GE (d 7 and 14), CP (d 7 and 28) and DM (d 28); whereas, pigs fed high lysine diets had greater (p<0.05) ATTD of GE and CP during d 7, 14 and 28. ATTD of ash, Ca and P remained unaffected (p>0.05) by dietary energy and lysine level. However, there was no energy${\times}$lysine interaction for any of the measured variables. Results obtained in present study suggested that high energy and lysine level improve the growth performance and ATTD of nutrients in weanling pigs.

The High Temperature Oxidation Behavior of l0wt%$Gd_2 O_3$- Doped $UO_2$

  • J.H. Yang;K.W. Kang;Kim, K.S.;K.W. Song;Kim, J.H.
    • Nuclear Engineering and Technology
    • /
    • 제33권3호
    • /
    • pp.307-314
    • /
    • 2001
  • The changes of weight gain, structure, morphology and uranium oxidation states in l0wt% G $d_2$ $O_3$-doped U $O_2$ during the oxidation below 475$^{\circ}C$ and heat treatment at 130$0^{\circ}C$ in air were investigated using TGA, XRD, SEM, EPMA and XPS. The room temperature ( $U_{0.86}$G $d_{0.14}$) $O_2$Cubic Phase Converted to highly distorted ( $U_{0.86}$G $d_{0.14}$)$_3$ $O_{8}$ -type sing1e Phase by oxidation at 475 $^{\circ}C$ in air. This oxidized phase was reduced by annealing at 130$0^{\circ}C$ in air. The room temperature XRD pattern of the 130$0^{\circ}C$ annealed powder revealed that ( $U_{0.86}$G $d_{0.14}$)$_3$ $O_{8}$ -type single phase was separated into Gd-depleted $U_3$ $O_{8}$ and Gd-enriched ( $U_{0.7}$G $d_{0.3}$) $O_2$$_{+x}$ type cubic phase. The reduction and phase separation by the high temperature annealing of kinetically metastable and highly deformed ( $U_{0.86}$G $d_{0.14}$)$_3$ $O_{8}$ -type phase are interpreted in terms of cation size difference between G $d^3$$^{+}$ and U according to the oxidation state of U.U.U.U.U.te of U.U.U.U.U.

  • PDF

The Method of Reducing Echo Time in 3D Time-of-flight Angiography

  • Park, Sung-Hong;Park, Jung-Il;Lee, Heung-Kyu
    • 한국의학물리학회:학술대회논문집
    • /
    • 한국의학물리학회 2002년도 Proceedings
    • /
    • pp.367-369
    • /
    • 2002
  • We have designed ramp profile excitation pulse based on the Shinnar-Le Roux (SLR) algorithm. The algorithm provides many advantages to pulse designers. The first advantage is the freedom of deciding the amplitudes, frequencies, and ripple sizes of stopband, passband, and transition band of pulse profile. The second advantage is the freedom of deciding the pulse phase, more specifically, minimum phase, linear phase, maximum phase, and any phase between them. The minimum phase pulse is the best choice in the case of 3D TOF, because it minimizes the echo time, which implies the best image quality in the same MR examination condition. In addition, the half echo technique is slightly modified in our case. In general, using the half echo technique means that the acquired data size is half and the rest part can be filled with complex conjugate of acquired data. But in our case, the echo center is just shifted to left, which implies the reduction of echo time, and the acquired data size is the same as the one without using the half echo technique. In this case, the increase of right part of data leads to improvement of the resolution and the decrease of left part of data leads to decrease of signal to noise ratio. Since in the case of 3D TOF, the signal to noise ratio is sufficiently high and the resolution is more important than signal to noise ratio, the proposed method appears to be significantly affective and gives rise to the improved high resolution angiograms.

  • PDF