• 한국통신학회논문지
• /
• 제19권10호
• /
• pp.1982-1990
• /
• 1994

본 논문에서는 PLL(Phase Locked Loop)의 궤환 성질을 이용한 Ku-band ($10.95\sim11.70Hz$)용 위상고정 유전체공진 발진기를 설계 및 제작하였다. 유전체 공진 발진기에 인가되는 바이어스 중 게이트 바이어스의 변화에 대한 중심 주파수의 변화를 이용하여 전압제어 주파수 변화부를 제거하였고 위상 s비교를 위해서는 샘플링 위상 비교기를 이용하였다. 위상고정 유전체 공진 발신기는 X-band 주파수 대역의 유전체 공진 발진기 신호를 샘플링 위상 비교기에 인가하여 VHF대역의 기준 신호에 위상고정 시켜 높은 주파수 안정도를 얻는 것으로 유럽형 FSS(Fixed Satellite Service)를 위한 10.00GHz로 구현하였다. 측정 결과 본 논문의 위상고정 유전체 공진 발진기는 유전체 공진 발진기보다 높은 주파수 안정도를 보였으며, 10.00GHz 에서 출력전력 8.67dBm과 2차 고조파는 -42dBc이하이었고, carrier로 보터 10kHz 벗어난 점에서 -81 dBc/Hz 이하의 위상 잡음을 얻었다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권13호
• /
• pp.5477-5482
• /
• 2015

Background: This study aimed to investigate the incidence and risk factors for a prethrombotic state in patients with malignant tumors. Materials and Methods: Plasma d-dimer (D-D) in patients with malignant tumors was measured. Abnormal rates of D-D and possible risk factors like gender, age, type of tumor, and staging of tumor were analyzed. Results: Of 1,453 patients, 629 demonstrated plasma D-D abnormality (43.3%). The D-D abnormal rate of male patients (n=851, 43.5%) was not statistically significantly different from that for female patients (n=602, 43.0%) (p>0.05). D-D abnormal rate increased with age and was statistically significant among different age groups (p<0.05). Regarding staging of tumor, D-D abnormal rate in patients with phase I was 2.0%, 6.2% in phase II, 47.6% in phase III and 83.1% in phase IV, with statistically significant differences between phase III and II, as well as phase III and IV (p<0.01). Conclusions: A prethrombotic state was closely related to malignancy of tumors. The risk factors for a prethrombotic state include age and tumor stage.

• 한국군사과학기술학회지
• /
• 제20권5호
• /
• pp.673-680
• /
• 2017

In the proposed paper, we designed low noise frequency synthesizer with compact size for Multi-Band. The proposed frequency synthesizer consists of fundamental frequency band(2 GHz) and harmonic frequency band(4 GHz). To improve the phase noise and spurious level of frequency synthesizer, we analyze how the configuration of frequency synthesizer affect the phase noise and design the multi-band's structure. The implemented frequency synthesizer reduce both the phase noise and spurious level. The phase noise is -92.17 dBc/Hz at 1 kHz frequency offset in 2 GHz and -90.50 dBc/Hz at 1 kHz frequency offset in 4 GHz. All spurious signals including fundamental frequency are suppressed at least 20 dBc than the second harmonic frequency.

• Journal of electromagnetic engineering and science
• /
• 제4권3호
• /
• pp.107-112
• /
• 2004

In this paper, the phase noise of 900 MHz VCO is improved using modified strip line square ring resonator. In order to demonstrate the phase noise improvement of the proposed VCO, the same circuit was manufactured using shorted-circuit resonator. In condition of the same bias current, the phase noise of the proposed VCO with modified square ring resonator is suppressed by 7 dB as - 103 dBc/Hz at 100 kHz offset compared to the conventional VCO with short-circuit resonator. From the proposed VCO, we achieved output power of - 4.8 dBm, harmonics suppression of 16 dB, and tuning bandwidth of 100 MHz. The proposed VCO consumed 5 mA at 3 V, and its size is 1.2 cm ${\times}$ 1.0 cm.

• Journal of the Optical Society of Korea
• /
• 제12권4호
• /
• pp.281-287
• /
• 2008

An acousto-optic tunable filter based 3-D micro surface profile measurement using an equally spaced 5 spectral phase shifting is described. The 5-bucket spectral phase shifting method is compared with a Fourier-transform method in the spectral domain. It can provide a fast measurement capability while maintaining high accuracy since it needs only 5 pieces of spectrally phase shifted imaging data and a simple calculation in comparison with the Fourier transform method that requires full wavelength scanning data and relatively complicated computation. The 3-D profile data of micro objects can be obtained in a few seconds with an accuracy of ${\sim}10nm$. The 3-D profile method also has an inherent benefit in terms of being speckle-free in measuring diffuse micro objects by employing an incoherent light source. Those simplicity and practical applicability is expected to have diverse applications in 3-D micro profilometry such as semiconductors and micro-biology.

• ETRI Journal
• /
• 제26권6호
• /
• pp.657-660
• /
• 2004

We propose a fine phase tuner and a rounding processor for a numerically controlled oscillator (NCO), yielding a reduced phase error in generating a digital sine waveform. By using the fine phase tuner presented in this paper, when the ratio of the desired sine wave frequency to the clock frequency is expressed as a fraction, an accurate adjustment in representing the fractional value can be achieved with simple hardware. In addition, the proposed rounding processor reduces the effects of phase truncation on the output spectrum. Logic simulation results of the NCO using these techniques show that the noise spectrum and mean square error (MSE) for eight output bits of a 3.125 MHz sine waveform are reduced by 8.68 dB and 5.5 dB, respectively, compared to those of the truncation method, and 2.38 dB and 0.83 dB, respectively, compared to those of Paul's scheme.

• 한국전자파학회논문지
• /
• 제14권2호
• /
• pp.104-110
• /
• 2003

광대역에서 동작되는 간단한 180$^{\circ}$ MMIC 위상변위기를 제안하였다. 제안된 회로는 1개의 Lange 커플러와 2개의 PIN 다이오드만으로 구성되어 있다. 2-6 GHz 대역에서 측정된 위상변위기는 최대 위상오차가 13$^{\circ}$이며 3.2 dB의 최대 삽입손실과 6.3 dB의 최소 반사손실을 보였다.

• 한국위성정보통신학회논문지
• /
• 제6권1호
• /
• pp.45-49
• /
• 2011

본 논문에서 위성통신 단말에 적용할 PLL 주파수 합성기의 잡음 특성을 분석하였고, 주파수 간격(step size)을 작게하면서 저 위상잡음 특성을 갖도록 설계 및 구현하였다. 구현된 주파수 합성기 모듈은 950~1450 MHz 대역에서 -2dBm 이상의 출력을 보였으며, 위상잡음은 10kHz offset에서 -101dBc/Hz로 측정되었다. 주파수 합성기의 위상잡음 특성을 분석한 결과 루프대역 내에서의 위상잡음은 분주기 값을 작게 하기위한 LO의 특성을 따라 감을 알 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.513-516
• /
• 2003

Phase Measuring Profilometry(PMP) has been developed as one of three dimensional 3-D shape measuring methods. The 3-D profile of an object was calculated from the phase data obtained by the sinusoidal patterns projected on the object. However, in some cases the approximation includes considerable errors. In this paper, the effect on the errors caused by the optical geometry and the calibration procedure in PMP technique are discussed. The errors which occured in the process of calculating the 3-D profile from the phase distribution are investigated theoritically and experimentally.

• 전자공학회논문지D
• /
• 제34D권9호
• /
• pp.1-6
• /
• 1997

A transmission type phase shift attenuator has a poor reflection characteristics at an output port. And that is controlled by the current, its dynamic rnage decreases due to the current limitation. In this paper, to avoid such disadvantages, a reflection type low phase shift attenuator has been designed and measured. As a result, at a center frequency (1855MHz), the sreflection type low pahse shift attenuator has an attenuation of 30dB, within the limit of 3 phase shift and less than -17dB reflection characteristics at both input and output ports. And it demonstrates the peformance of the reflection type low phase shift attenuator is better than the transmission type phase shift attenuator with the same measurement specifications.