• 제목/요약/키워드: Cut-Off Frequency

검색결과 405건 처리시간 0.025초

컴퓨터의 충격해석 및 실험적 검증 (Evaluation of Drop/Impact Performance of Laptop Computer)

  • 윤영한;임경화;김진규;안채헌
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2000년도 추계학술대회논문집
    • /
    • pp.737-741
    • /
    • 2000
  • Portable communication devices such as laptop computers suffer impact-induced failure in their usage. Drop/impact performance of these products is one of important concerns of product design. Because of the small size of this kind of electronics products, it is very expensive, time-consuming and difficult to conduct drop tests to directly detect the failure mechanism and identify their drop behaviors. Finite element analysis provides a vital, powerful vehicle to solve the problems. The models are created with HYPERMESH, and the analysis is carried out with LS-DYNA3D. The analysis is focused on HDD impact behavior in acceleration peak values.

  • PDF

직렬아크신호의 검출 (Detection of Series Arc Signal)

  • 지홍근;박대원;김일권;길경석
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2008년도 추계학술대회 논문집
    • /
    • pp.225-229
    • /
    • 2008
  • This paper describes a series arc detection algorithm in a low-voltage wiring system. We designed and fabricated an arc detection circuit which consists of a high-pass filter with the low cut-off frequency of 3 kHz to attenuate power frequency. The series arcing phenomena was simulated by an arc generator specified in UL1699. In the experiment, various loads such as resistive loads, resistive loads controlled by a dimmer, and vacuum cleaners were used. Whether the signal is arc or noise is discriminated by pulse counts and periodicity of the detected signal.

  • PDF

새로운 CMOS Floating저항의 설계와 그 응용에 대한연구 (A study on the design of new floating resistor and it′s application)

  • 이영훈
    • 한국컴퓨터정보학회논문지
    • /
    • 제5권3호
    • /
    • pp.76-83
    • /
    • 2000
  • CMOS기술의 발전에 의해 연속신호시스템은 상당한 발전을 가져왔다. 이 논문에서는 새로운 CMOS floating저항을 써서 저역통과필터를 설계하고 PSpice Simulation을 통하여 그 특성이 우수함을 입증하였다. 특히, CMOS로 구성되는 새로운 floating저항은 포화영역에서 동작하도록 구현하였다. 이 방법으로 설계된 저역통과필터는 SC필터보다 구조가 더 간단하므로 IC화 할 때 칩 면적을 감소시킬 수 있다.

  • PDF

Study on resonant electron cyclotron heating by OSXB double mode conversion at the W7-X stellarator

  • Adlparvar, S.;Miraboutalebi, S.;Kiai, S.M. Sadat;Rajaee, L.
    • Nuclear Engineering and Technology
    • /
    • 제50권7호
    • /
    • pp.1106-1111
    • /
    • 2018
  • Electromagnetic waves potentially have been used to heat overdense nuclear fusion plasmas through a double mode conversion from ordinary to slow extraordinary and finally to Electron Bernstein Wave (EBW) modes, OSXB. This scheme is efficient and has not any plasma density limit of electron cyclotron resonance heating due to cut-off layer. The efficiency of conversion depends on the isotropic launching angles of the microwaves with the plasma parameters. In this article, a two-step mode conversions of OSXB power transmission efficiency affected by the fast extraordinary (FX) loses at upper hybrid frequency are studied. In addition, the kinetic (hot) dispersion relation of a overdense plasma in a full wave analysis of a OSXB in Wendelstein 7X (W7-X) stellarator plasma has been numerically simulated. The influence of plasma dependent parameters such as finite Larmor radius, electron thermal velocity and electron cyclotron frequency are represented.

액티브 스너버를 이용한 고주파 용접기 컨버터 개발 (Development of Converter for High Frequency Welding Machines using Active Snubber)

  • 신준영;이재민;최승원;이준영
    • 전력전자학회논문지
    • /
    • 제21권4호
    • /
    • pp.351-355
    • /
    • 2016
  • Welding machines are high-capacity systems used in a low-frequency range using IGBT. As their system is similar to a large transformer, most welding machines suffer a great loss because of hard switching and vast leakage inductance. A voltage-balancing circuit is designed to overcome these shortcomings. This circuit can reduce the transformer size by making it into a high frequency and reducing the input voltage by half and by adopting a serial structure that connects two full-bridges in a series to use a MOSFET with a good property at high frequency. In addition, a Schottky diode is used in the primary rectifier to overcome the low efficiency of most welding machines. To use the Schottky diode with a reliably relatively low withstanding voltage, an active snubber is adopted to effectively limit the ringing voltage of the diode cut-off voltage.

실리콘 나노 와이어 기반의 무접합 MOSFET의 최적 설계 및 기본적인 고주파 특성 분석 (Optimum Design of Junctionless MOSFET Based on Silicon Nanowire Structure and Analysis on Basic RF Characteristics)

  • 조성재;김경록;박병국;강인만
    • 대한전자공학회논문지SD
    • /
    • 제47권10호
    • /
    • pp.14-22
    • /
    • 2010
  • 기존의 n-type metal-oxide-semiconductor field effect transistor(NMOSFET)은 $n^+/p^{(+)}/n^+$ type의 이온 주입을 통하여 소스/채널/드레인 영역을 형성하게 된다. 30 nm 이하의 채널 길이를 갖는 초미세 소자를 제작함에 있어서 설계한 유효 채널 길이를 정확하게 얻기 위해서는 주입된 이온들을 완전히 activation하여 전류 수준을 향상시키면서도 diffusion을 최소화하기 위해 낮은 thermal budget을 갖도록 공정을 설계해야 한다. 실제 공정에서의 process margin을 완화할 수 있도록 오히려 p-type 채널을 형성하져 않으면서도 기존의 NMOSFET의 동작을 온전히 구현할 수 있는 junctionless(JL) MOSFET이 연구중이다. 본 논문에서는 3차원 소자 시뮬레이션을 통하여 silicon nanowire(SNW) 구조에 접목시킨 JL MOSFET을 최적 설계하고 그러한 조건의 소자에 대하여 conductance, maximum oscillation frequency($f_{max}$), current gain cut-off frequency($f_T$) 등의 기본적인 고주파 특성을 분석한다. 채널 길이는 30 nm이며 설계 변수는 채널 도핑 농도와 채널 SNW의 반지름이다. 최적 설계된 JL SNW NMOSFET에 대하여 동작 조건($V_{GS}$ = $V_{DS}$ = 1.0 V)에서 각각 367.5 GHz, 602.5 GHz의 $f_T$, $f_{max}$를 얻을 수 있었다.

A 1.2-V Wide-Band SC Filter for Wireless Communication Transceivers

  • Yang, Hui-Kwan;Cha, Sang-Hyun;Lee, Seung-Yun;Lee, Sang-Heon;Lim, Jin-Up;Choi, Joong-Ho
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제6권4호
    • /
    • pp.286-292
    • /
    • 2006
  • This paper presents the design of a low-voltage wide-band switched-capacitor (SC) filter for wireless communication receiver applications. The filter is the 5th-order Elliptic lowpass filter. With the clock frequency of 50MHz implying that an effective sampling frequency is 100MHz with double sampling scheme, the cut-off frequency of the filter is programmable to be 1.25MHz, 2.5MHz, 5MHz and 10MHz. For low-power systems powered by a single-cell battery, the SC filter was elaborately designed to operate at 1.2V power supply. Simulation result shows that the 3rd-order input intercept point (IIP3) can be up to 27dBm. The filter was fabricated in a $0.25-{\mu}m$ 1P5M standard CMOS technology and measured frequency responses show good agreement with the simulation ones. The current consumption is 34mA at a 1.2V power supply.

저압배선계통에서 직렬아크의 검출에 관한 연구 (A Study on the Series Arc Detection in Low-voltage Wiring Systems)

  • 김일권;박대원;최수연;박찬용;김황국;길경석
    • 한국전기전자재료학회논문지
    • /
    • 제21권2호
    • /
    • pp.182-187
    • /
    • 2008
  • This paper dealt with the detection algorithm of series arcing, which is a cause of electric fires in low-voltage wiring systems. To find the distinguished electrical features of series arc, we simulated series arcing by the arc generator specified in UL1699. An electric heater, an inverter-controlled vacuum cleaner, and a phase-controlled incandescent lamp were used as loads to generate series arcing. A high-pass filter (HPF) with the low cut-off frequency of 3 kHz at -3 dB was fabricated and applied to separate the series arc signal from the AC voltage source. The experiment showed that the high frequency signal generates randomly during series arcing, and the phase-controlled incandescent lamp produces high frequency pulses even in normal state. In this case, the magnitude, the width, and the randomness of high frequency signal should be analyzed to estimate series arcing precisely.

LTE-Advanced SAW-Less 송신기용 7개 채널 차단 주파수 및 40-dB 이득범위를 제공하는 65-nm CMOS 저전력 기저대역회로 설계에 관한 연구 (A 65-nm CMOS Low-Power Baseband Circuit with 7-Channel Cutoff Frequency and 40-dB Gain Range for LTE-Advanced SAW-Less RF Transmitters)

  • 김성환;김창완
    • 한국정보통신학회논문지
    • /
    • 제17권3호
    • /
    • pp.678-684
    • /
    • 2013
  • 본 논문에서는 SAW 필터가 없는 LTE-Advanced RF 송신기에 적용 가능한 기저대역 송신단 회로를 제안한다. 제안하는 기저대역 송신단 회로는 Tow-Thomas구조의 2차 능동 저역통과 필터 1개와 1차 수동 RC 필터 1개로 구현되었으며, 0.7 MHz, 1.5 MHz, 2.5 MHz, 5 MHz, 7.5 MHz, 10 MHz, 그리고 20 MHz의 총 7개의 채널 차단 주파수를 제공하며, 각 채널 별로 -41 dB에서 0 dB까지 1-dB 단계로 이득 조절이 가능하다. 제안하는 2차 능동 저역 통과 필터 회로는 DC 소모 전류 효율을 높이기 위해 채널 차단 주파수를 세 그룹으로 나누어서 선택된 차단 주파수 그룹에 따라 연산증폭기의 전류 소모를 3단계로 가변 할 수 있도록 연산증폭기 내부에 3개의 단위-연산증폭기(OTA)를 병렬로 연결하여 선택적으로 사용할 수 있도록 설계하였다. 또한, 제안하는 연산 증폭기는 저전력으로 1-GHz UGBW(Unit Gain Bandwidth)를 얻기 위해 Miller 위상 보상 방식과 feed-forward 위상 보상 방식을 동시에 사용하였다. 제안하는 기저대역 송신기는 65-nm CMOS 공정을 사용하여 설계되었고 1.2 V의 전압으로부터 선택된 채널 대역폭에 따라 최소 6.3 mW, 최대 24.1 mW의 전력을 소모한다.

선박 비상조명 전원장치의 다중 원격제어 (Multi Remote Control of Ship's Emergency Lighting Power Supply)

  • 이성근;임현정
    • 한국항해항만학회지
    • /
    • 제29권10호
    • /
    • pp.859-863
    • /
    • 2005
  • 본 논문은 광범위한 전력제어가 가능하고, PC 직렬통신 방식에 의해 원거리에서 시스템을 ON-OFF할 수 있으며, 시스템의 상태를 모니터링 할 수 있는 선박비상조명시스템의 전력제어특성 개선에 관해 연구한다. 제안된 시스템은 강압형 컨버터, 비상급전회로, 반 브리지 인버터, 형광램프기동회로, 마이크로프로세서 제어 및 멀티통신회로 등으로 구성된다. 실험을 통하여 과전류에 의한 해당 시스템의 정지와 주전원 차단시의 비상전원에 의한 신속한 급전을 확인할 수 있고, 입력전력은 35[$\%$] 범위까지 제어됨을 확인한다. 또한, 원거리에서 원하는 시스템을 ON-OFF 하고, 시스템의 전력, 전압, 전류, 배터리 전압 등의 모니터링도 한다.