• Geomechanics and Engineering
• /
• v.15 no.6
• /
• pp.1193-1205
• /
• 2018

A footing located on slopes possess relatively lower bearing capacity as compared to the footing located on the level ground. The bearing capacity further reduces under seismic loading. The adverse effect of slope inclination and seismic loading on bearing capacity can be minimized by proving sufficient setback distance. Though few earlier studies considered setback distance in their analysis, the range of considered setback distance was very narrow. No study has explored the critical setback distance. An attempt has been made in the present study to comprehensively investigate the effect of setback distance on footing under seismic loading conditions. The pseudo-static method has been incorporated to study the influence of seismic loading. The rate of decrease in seismic bearing capacity with slope inclination become more evident with the increase in embedment depth of footing and angle of shearing resistance of soil. The increase in bearing capacity with setback distance relative to level ground reduces with slope inclination, soil density, embedment depth of footing and seismic acceleration. The critical value of setback distance is found to increase with slope inclination, embedment depth of footing and density of soil. The critical setback distance in seismic case is found to be more than those observed in the static case. The failure mechanisms of footing under seismic loading is presented in detail. The statistical analysis was also performed to develop three equations to predict the critical setback distance, seismic bearing capacity factor ($N_{{\gamma}qs}$) and change in seismic bearing capacity (BCR) with slope geometry, footing depth and seismic loading.

• Journal of Magnetics
• /
• v.19 no.4
• /
• pp.315-322
• /
• 2014

In this work, Artificial Neural Network (ANN) was used to model the dynamic behavior of ferromagnetic hysteresis derived from performing the mean-field analysis on the Ising model. The effect of field parameters and system structure (via coordination number) on dynamic critical points was elucidated. The Ising magnetization equation was drawn from mean-field picture where the steady hysteresis loops were extracted, and series of the dynamic critical points for constructing dynamic phase-diagram were depicted. From the dynamic critical points, the field parameters and the coordination number were treated as inputs whereas the dynamic critical temperature was considered as the output of the ANN. The input-output datasets were divided into training, validating and testing datasets. The number of neurons in hidden layer was varied in structuring ANN network with highest accuracy. The network was then used to predict dynamic critical points of the untrained input. The predicted and the targeted outputs were found to match well over an extensive range even for systems with different structures and field parameters. This therefore confirms the ANN capabilities and indicates the ANN ability in modeling the ferromagnetic dynamic hysteresis behavior for establishing the dynamic-phase-diagram.

• The Journal of Information Systems
• /
• v.11 no.1
• /
• pp.151-173
• /
• 2002

The purpose of the current study is to identify the critical success factors of information systems in small-and-medium-sized firms in general, and also to investigate any differences of those critical success factors between two different industries: the electronic and textile industries. To accomplish this purpose, we collected and analyzed 115 and 108 questionnaires from the electronic and textile industries respectively. From the results of statistical analysis, critical success factors of small-and-medium-sized companies in general were obtained, and critical success factors from two industries were compared and the differences were able to be identified. The results of the analysis of the questionnaires are as follows: 1) The organizational characteristics of the electronic industry showed some differences from those of the textile industry; 2) Small-and-medium-sized companies in the electronic industry appeared to have some differences from companies in the textile industry in terms of critical success factors of information systems. Such factors as education and training, quality level of software, capability of users, business processes, standardization of data management, level of organization, user involvement, support of top management were significantly different between two industries.

• Journal of Korean Critical Care Nursing
• /
• v.11 no.2
• /
• pp.21-33
• /
• 2018

Purpose : To explore the person-centered care (PCC) experienced by critical patients. Method : This qualitative study deductively examined the attributes of the PCC model proposed by Jakimowicz and Perry. The participants were 16 patients who were recently discharged from intensive care units at a university hospital. Data were collected through in-depth interviews and were analyzed using the deductive method of content analysis. Results : A total of 4 categories, 16 subcategories, and 33 codes were generated from 171 meaningful statements. The final 4 categories were "compassionate presence," "professional interaction," "outstanding competency," and "patient identity." These were consistent with the main attributes of Jakimowicz and Perry's model. However, most of the codes belonged to the "compassionate presence" and "patient identity" categories. Among the attributes of the model, "continuity of nursing," "therapeutic relationship," "expert knowledge," "clinical knowledge," "evidence-based intervention," and "patient's rights" were not derived as codes. Conclusion : These findings deepen the understanding of the PCC model from the patient's point of view. The main attributes of PCC identified in the current study can be applied to the development of practical guidelines for intensive care nursing. In addition, we recommend the development of a PCC measurement tool for critical care patients.

• English Language & Literature Teaching
• /
• v.10 no.3
• /
• pp.89-112
• /
• 2004

This article examines the ways in which language can be exploited in the manipulation of the reader's interpretation of a text to make him/her take certain lines of thought according to the writer's persuasive intents. Such functions of language provide valid foundations to support the teaching of critical reading skills and to explore an adequate approach to discourse analysis. A pilot study was conducted to find out the extent to which the reader can be coaxed into thinking in some fashions guided by specific linguistic devices employed for ideological texts. Forty-seven subjects divided into two groups (humanities majors and natural science majors at undergraduate level) joined the two-fold questionnaire surveys intended to look at their critical reading abilities. The empirical results indicate that college students whose majors are humanities were more inclined to take a holistic approach in processing commercial advertisement texts and their abilities for critical interpretation appeared to be lower than those of the subjects whose majors are natural sciences, who showed a relatively high tendency to take an analytical approach in decoding the textual facts. As a consequence, pedagogic implications for increasing critical reading abilities have resulted in a set of analytical procedures concerning ideological texts which is linked with instructional guidelines to emphasize the importance of the reader's logical and analytical reasoning power, entirely accepted as a general prerequisite for cracking the covert language gambits.

• Journal of KSNVE
• /
• v.8 no.3
• /
• pp.450-456
• /
• 1998

A rotordynamic analysis is performed with a centrifuge rotor-bearing system for the raing speed of 100,000 rpm. The system is composed of a centrifuge rotor(or simply the rotor), flexible shaft, motor rotor and shaft, and two support rolling element bearings of the motor shaft. Design goals are to achieve wide separation margins of critical speeds and favorable unbalance responses of the rotor at the associated critical speeds. The latter requirements are especially important as the system crosses multiple numbers of critical speeds and as the system may not have enough separaton margins around the rating speed. As the system adopts an extra-flexible shaft, it is shown that the rotor has satisfactory small unbalance responses over higher criticals while having an unsatisfactory large one at the first critical. To supress this a bumper ring or guide bearing needs to be installed at a suitable location of the flexible shaft. It is also shown that even with the flexible shaft the dynamics of the motor must be incoporated into the full system model to accurately identify the fourth critical speed, which is close to the rating speed, and higher ones. The analysis is based on the finite element method.

• Journal of Korean Critical Care Nursing
• /
• v.4 no.2
• /
• pp.1-14
• /
• 2011

Purpose: This study was aimed to understand and describe the Korean critical care advanced practice nurses' work experience. Methods: Data was collected through 2 focus group interviews that were held in two different university hospitals in Seoul, Korea. All interviews were recorded and transcribed, and data were analysed using modified qualitative content analysis. Results: Ten themes were drawn from data analysis. They are "Various and complex tasks", "Excellency of advanced nursing practice", "Pressure and responsibility accompanied with pride", "Role identity confusion", "Role conflict", "Leaping and evolving role", "Gap between role and outcome evaluation", "Underestimated outcomes", "Where are my outcomes?" "Searching for outcomes: publicize the role". Conclusion: The results of this study help to understand the role of Korean critical care advanced practice nurses and to guide to outcome evaluation of their role effectiveness. Developing qualitative outcome indicators, cost-effectiveness ananlysis of Korean critical care advanced practice nurses' role, and accumulation of evidences through researches on outcome evaluation will be needed to successfully settle down advanced practice nursing in Korea.

• Perspectives in Nursing Science
• /
• v.8 no.2
• /
• pp.105-112
• /
• 2011

Purpose: The purpose of this study was to identify the predictors of job stress in hospital nurses. The predictors of job stress were the subject's general characteristics, communication style, critical thinking disposition and job satisfaction. Methods: 294 nurses who had worked in a hospital participated in this study. The data were analysed with descriptive analysis methods including a t-test, ANOVA, Scheffe test, Pearson correlation coefficient and multiple regression analysis. Results: The job stress score for nurses was 111.6. There was a statistically significant difference between job stress and marriage status (p<.001), education (p<.001), clinical career (p<.001), position (p<.001), communication style (p<.001), critical thinking disposition (p<.001), and job satisfaction (p<.001). Critical thinking disposition, job satisfaction and clinical career together accounted for 36.88% of the total variation in job stress. Conclusion: Based on the findings of this study, the development of a nursing intervention program that can lead to an improvement in critical thinking disposition is suggested.

• Earthquakes and Structures
• /
• v.9 no.4
• /
• pp.875-891
• /
• 2015

Earthquake can occur anywhere in the world and it is essential to design important members in special structures based on maximum possible forces that can be produced in them under severe earthquake. In addition, since the earthquake is an accidental phenomena and there are no similar earthquakes, therefore the possibility of strong earthquakes should be taken into account in earthquake-resistant design of important structures. Based on this viewpoint, finding the critical acceleration which maximizes internal forces is an essential factor in structural design. This paper proposes critical excitation method to compute the critical acceleration in design of important members in special structures. These critical accelerations are computed so that the columns' internal shear force at the base of the structure at each time step is maximized under constraints on ground motion. Among computed critical accelerations (of each time step), the one which produces maximum internal shear force is selected. A numerical example presents to show the efficiency of critical excitation method in determining the maximum internal shear force and base moment under variety of constraints. The results show that these method can be used to compute the resonant earthquake which have large enough effective duration of earthquake strong motion (between 12.86 sec to 13.38 sec) and produce the internal shear force and base moment for specific column greater than the same value for selected earthquakes in constructing the critical excitation (for different cases about 2.78 to 1.29 times the San Fernando earthquake). Therefore, a group of them can be utilized in developing the response spectrum for design of special structures.

• Journal of Korean Critical Care Nursing
• /
• v.11 no.2
• /
• pp.75-85
• /
• 2018

Purpose : The purpose of this study was to examine the possible direction of critical care nursing research in the future by analyzing the trends of recent Korean studies. Method : Using a database search, we selected 263 articles on critical care nursing that were published in Korean journals between 2008 and 2017. Then, we conducted an integrative review of the contents of the selected articles and analyzed the English abstracts using the relevant packages and functions of the R program. Results : The number of studies concerning critical care nursing has increased over the 10-year period, and the specific topic of each study has diversified according to the time at which it was conducted. In terms of quality, the majority of the research was published in high-level academic journals. The key words regularly studied over the past decade were: knowledge, delirium, education, restraint, stress, and infection. Studies related to vancomycin-resistant enterococci infection, compliance, and standards have decreased, while studies related to death, communication, and safety have increased. Conclusion : Randomized controlled trials and protocol research for evidence-based critical care need to be conducted, as does research on family involvement. The key word analysis of unstructured text used in this study is a relatively new method; it is suggested that this method be applied to various critical care nursing research and develop it methodologically.