1 |
IRC (2015), "International residential code for one- and two-family dwellings", International Code Council, Country Club Hills, IL.
|
2 |
Jahanandish, M. and Keshavarz, A. (2005), "Seismic bearing capacity of foundations on reinforced soil slopes", Geotext. Geomembr., 23(1), 1-25.
DOI
|
3 |
Keawsawasvong, S. and Ukritchon, B. (2016), "Finite element limit analysis of pullout capacity of planar caissons in clay", Comput. Geotech., 75(1), 12-17.
DOI
|
4 |
Keskin, M.S. and Laman, M. (2012), "Model studies of bearing capacity of strip footing on sand slope", KSCE J. Civil Eng., 17(4):699-711.
DOI
|
5 |
Krabbenhoft, K., Lyamin, A. and Krabbenhoft, J. (2015), "Optum computational engineering", www.optumce.com.
|
6 |
Kumar, J. and Chakraborty, D. (2013), "Seismic bearing capacity of foundations on cohesionless slopes", J. Geotech. Geoenviron. Eng., 139(11), 1986-1993.
DOI
|
7 |
Kumar, J. and Ghosh, P. (2006), "Seismic bearing capacity for embedded footings on sloping ground", Geotechnique, 56(2), 133-140.
DOI
|
8 |
Kumar, J. and Mohan Rao, V.B.K. (2003), "Seismic bearing capacity of foundations on slopes", Geotechnique, 53(3) 347-361.
DOI
|
9 |
Lee, K.M. and Manjunath, V.R. (2000), "Experimental and numerical studies of geosynthetic-reinforced sand slopes loaded with a footing", Can. Geotech. J., 37(4), 828-842.
DOI
|
10 |
Lyamin, A.V., Sloan, S.W., Krabbenhoft, K. and Hjiaj, M. (2005), "Lower bound limit analysis with adaptive remeshing", Int. J. Numer. Meth. Eng., 63(14), 1961-1974.
DOI
|
11 |
Meyerhof, G.G. (1957), "The ultimate bearing capacity of foundation on slopes", 4th Int. Conf. on Soil Mech. Found. Eng., 3, 384-386.
|
12 |
Meyerhof, G.G. (1965), "Shallow foundations". J. Soil Mech. Found. Div., ASCE, 91(2), 21-31.
|
13 |
Nouri, M. (2014), "Interaction domain of shallow foundations on the top of a slope", Master Dissertation, Dept. of Civil, Environmental and Land Management Engineering, Polytechnic University of Milan. Italy.
|
14 |
Mizuno, T., Takumitsu, Y. and Kavakami, H. (1960), "On the bearing capacity of a slope of cohesionless soil", Soil. Found., 1(20), 30-37.
DOI
|
15 |
Naeini, S.A., Rabe, B.K. and Mahmoodi, E. (2012), "Bearing capacity and settlement of strip footing on geosynthetic reinforced clayey slopes", J. Centr. South Univ., 19(4), 1116-1124.
DOI
|
16 |
Narita, K. and Yamaguchi, H. (1990), "Bearing capacity analysis of foundations on slopes by use of log-spiral sliding surfaces". Soil. Found., 30(3), 144-152.
DOI
|
17 |
Optum G2 [Computer software], OptumCE, Copenhagen, Denmark.
|
18 |
Peck, R.B., Hanson, W.E. and Thornburn, T.H, (1974), Foundation Engineering, Wiley, New York.
|
19 |
Rostami, V. and Ghazavi, M. (2015), "Analytical solution for calculation of bearing capacity of shallow foundations on geogrid-reinforced sand slope", IJST-T. Civil Eng., 39(C1), 167-182.
|
20 |
Ausilio, E. (2014), "Seismic bearing capacity of strip footings located close to the crest of geosynthetic reinforced soil structures", Geotech. Geol. Eng., 32(4), 885-899.
DOI
|
21 |
Bowles, J.E. (1988), Foundation Engineering and Design, 5th Edition, McGraw-Hill, Inc.
|
22 |
Cure, E., Sadoglu, E., Turker, E. and Uzuner, B.A. (2014), "Decrease trends of ultimate loads of eccentrically loaded model strip footings close to a slope", Geomech. Geoeng., 6(5), 469-485.
|
23 |
Casablanca, O., Cascone, E. and Biondi, G. (2016), "The static and seismic bearing capacity factor for footings adjacent to slopes", Procedia Eng., 158, 410-415.
DOI
|
24 |
Castelli, F. and Motta, E. (2010), "Bearing capacity of strip footings near slopes", Geotech. Geol. Eng., 28(2), 187-198.
DOI
|
25 |
Chakraborty, D. and Kumar, J. (2014), "Seismic bearing capacity of shallow embedded foundations on a sloping ground surface", Int. J. Geomech., 15(1), 04014035.
DOI
|
26 |
Chakraborty, D. and Mahesh, Y. (2015), "Seismic bearing capacity factors for strip footings on an embankment by using lower-bound limit analysis", Int. J. Geomech., 16(3), 06015008.
|
27 |
Choudhury, D. and Subba Rao, K.S. (2006), "Seismic bearing capacity of shallow strip footings embedded in slope", Int. J. Geomech., 6(3), 176-184.
DOI
|
28 |
El Sawwaf, M. (2010), "Experimental and numerical study of strip footing supported on stabilized sand slope", Geotech. Geol. Eng., 28(4), 311-323.
DOI
|
29 |
El Sawwaf, M.A. (2007), "Behavior of strip footing on geogridreinforced sand over a soft clay slope", Geotext. Geomembr., 25(1), 50-60.
DOI
|
30 |
Georgiadis K. (2010), "Undrained bearing capacity of strip footings on slopes", J. Geotech. Geoenviron. Eng., 136(5), 677-685.
DOI
|
31 |
Ghazavi, M. and Mahali, A.S. (2013), "Determination of seismic bearing capacity of shallow strip footings on slopes", The 8th Symposium on Advances in Science and Technology, Mashhad, Iran.
|
32 |
Huang, C.C. and Kang, W.W. (2008), "The effects of a setback on the bearing capacity of A surface footing near a slope", J. Geo Eng., 3(1), 25-32.
|
33 |
Giroud, J.P. (1971), "Force portante d'une fondation sur une pente", A.I.T.B.T.P., No. 283 - 284, juillet - aout, Serie: theorie et methode de calcul, No. 142, Paris, France.
|
34 |
Graham, J., Andrews, M. and Shields, D.H. (1988), "Stress characteristics for shallow footings in cohesionless slopes", Can. Geotech. J., 25(2), 238-249.
DOI
|
35 |
Hansen, J.B. (1970), "A revised and extended formula for bearing capacity", Bulletin 28, Danish Geotechnical Institute, Copenhagen.
|
36 |
Huang, C.C. (2009), "Effects of horizontal and vertical seismic loads on the bearing capacity of a surface footing adjacent to a slope", Soil. Found., 49(2), 249-258.
DOI
|
37 |
Huang, C.C. and Kang, W.W. (2008), "Seismic bearing capacity of a rigid footing adjacent to a cohesionless slope", Soil. Found., 48(5), 641-651.
DOI
|
38 |
Acharyya, R. and Dey, A. (2017), "Finite element investigation of the bearing capacity of square footings resting on sloping ground", INAE Lett., 2(3), 97-105.
DOI
|
39 |
Altalhea, E.B., Taha, M.R. and Abdrabbob F.M. (2015), "Behavior of strip footing on reinforced sand slope", J. Civil Eng. Manage., 21(3), 376-383.
DOI
|
40 |
Arvin, M.R., Askari, F. and Farzaneh, O. (2012), "Static and dynamic bearing capacity of strip footings, under variable repeated loading", Turkish J. Eng. Env. Sci., 36(1), 19-31.
|
41 |
Askari, F. and Farzaneh, O. (2003), "Upper-bound solution for seismic bearing capacity of shallow foundations near slopes", Geotechnique, 53(8), 697-702.
DOI
|
42 |
Saran, S., Sud, V. and Handa, S. (1989), "Bearing capacity of footings adjacent to slopes", J. Geotech. Eng. ASCE, 115(4), 553-573.
DOI
|
43 |
Sarma, S.K. and Chen, Y.C. (F1995), "Seismic bearing capacity of shallow strip footings near sloping ground", The 5th SECED Conference, Chester, UK, October.
|
44 |
Sarma, S.K. and Iossifelis, I.S. (1990), "Seismic bearing capacity factors of shallow strip footings", Geotechnique, 40(2), 265-273.
DOI
|
45 |
Sawada, T., Nomachi, S.G. and Chen, W.F. (1994), "Seismic bearing capacity of a mounded foundation near a down-hill slope by pseudo-static analysis", Soil. Found., 34(1), 11-17.
DOI
|
46 |
Uniform Building Code (UBC) (1997), Uniform Building Code, International Conference of Building Officials, Whittier, California, USA.
|
47 |
Shields, D., Chandler, N. and Garnier, J. (1990), "Bearing capacity of foundations in slopes", J. Geotech. Eng., ASCE, 116(3), 528-537.
DOI
|
48 |
Shukla, R.P. and Jakka, R.S. (2017), "Critical setback distance for a footing resting on slopes", Acta Geotech. Slovenica, 14(2), 19-31.
|
49 |
Terzaghi, K. (1943), Theoretical Soil Mechanics, Wiley, New York.
|
50 |
Varzaghani, I.M. and Ghanbari, A. (2014), "A new analytical model to determine dynamic displacement of foundations adjacent to slope", Geomech. Geoeng., 6(6), 561-575.
|
51 |
Vesic, A.S. (1973), "Analysis of ultimate loads of shallow foundations", J. Soil Mech. Found. Div., ASCE, 99(1), 45-73
|
52 |
Yamamoto, K. (2010), "Seismic bearing capacity of shallow foundations near slopes using the upper-bound method", Int. J. Geomech., 4(2), 255-267.
|