• Journal of Practical Engineering Education
• /
• v.14 no.2
• /
• pp.405-411
• /
• 2022

In this study, K-Digital Training program, which is a representative government project of vocational training for new digital technologies in response to the 4th industrial revolution, is analyzed and an improvement model is suggested. The K-Digital training project is rapidly expanding, with the number of training operators increasing by 7.1 times and training course programs by 8.5 times within three years of implementation, but there is a severe problem in that education and training programs are concentrated in the metropolitan. To solve this problem, a shared training model is proposed. This model is a plan to maximize the use of local human and material resources, to respond to new digital technologies through systematic composition and operation, and to enhance the stability and reliability of education and training. In each region, a sharing and cooperation model in the form of a consortium is established that jointly utilizes resources scattered by various training institutions such as instructors, training contents, and training infrastructure related to digital new technology. In addition, a training certification evaluation system is introduced to increase the credibility of the rapidly developing digital new technology training.

• Survey Research
• /
• v.6 no.1
• /
• pp.1-38
• /
• 2005

Considering the importance of corruption index measurement model and the diffusion of popular awareness about the importance of anti-corruption, this research compared and analyzed existing corruption index measurement models. This paper has selected "Anti-Corruption Index model(ACI model)" that was developed by Seoul Development Institute and "CCEJ's Corruption Index model" which is under use by the Citizens' Coaltion for Economic Justice. These two models were analyzed in terms of appropriateness of 'the indicator and index choice method', 'the research design' and 'the use of statistical data'. This analysis shows that two models have some problems. First, at the level of indicator and index choice method, the indicators of CCEJ's corruption index model is too atomized and redundant. As not putting weight of indicator, it did not consider importance of each indicator. Citizens who evaluated the level of corruption didn't participate in the weight evaluation team, which results in failure of the model to reflect the citizens' opinion. Also, because the question about Seoul Metropolis' corruption level is not included, it is not detected difference between real corruption level and perceptive corruption level. Second, in terms of appropriateness of research design, the sample of the CCEJ' corruption index model is too small to get credibility. The objectivity of research method seems to be low because survey was performed by exit interview. In addition, 38 items are overfull in the questionnire of CCEJ's corruption index model compare to 13 items in ACI model. Also, in making up questions, the terms are redundant and unobvious. Third, in regarding with feasibility of the statistical data, the CCEJ's corruption index model uses regulation data for disciplinary punishment of 25 local governments in Seoul from 1995 to 1999. But, it is common ideas of scholars that statistical data indicates the tip of an iceberg in corruption. So for using a statistical data, it needs a data of enough quantity and has a high level credibility. In addition, objective method of giving weight is not developed. In this point of view, the use of statistical data has some limits. To solve this problem, ① objective data should be included in the indicators, ② various indicators should be developed and ③ a method of giving weight should be improved.

• The Journal of the Korea Contents Association
• /
• v.17 no.10
• /
• pp.231-240
• /
• 2017

Although the value of technology is evaluated by various methods, the result of technology valuation is different from evaluator and evaluation methods. Also the uncertainty on the result occurs with respect to the evaluation factors and evaluation model which should be considered. In the case of lack of data or comparison target, the credibility of the technology valuation result could be unsure. To decrease uncertainty of the technology valuation, Fuzzy concept and Fuzzy Comprehensive Evaluation method are applied instead of using existing methods which evaluate technology value(level) by the number. In the research, we firstly devide evaluation criteria into technology value factor and business value factor and evaluate the technology level for micro pressure wave reduction technology which has been developed in Korea. Technology value factor is marked as high level with 46%, and business value factor is very high with 44%, and the overall level of technology is evaluated between very high and high. It helps to compare to other technology in the rivalry by the factors as it can evaluate the value of technology by factors. The technology valuation method which is applied in this research is expected to use on analyzing technology level of new technology or alternative technology in many different field.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.553-556
• /
• 2018

This study proposes a 'NCS-based corporate qualification system for elementary and maintenance tasks manual' applicable to industry in order to establish standards for corporate qualification system which perform education and evaluation for industry-specialized technic, and for corporate qualification system which practice structured training for corporate specialized tasks to reflect the demand of industries' on-site training more precisely, and set up standardized policy and process manuals within various corporations in order to improve credibility and objectivity. Prior research has focused on on-site visits to companies and institutes in Japan that employ corporate qualification systems. Research analyses on current practices, structures and outcomes of qualification systems, online, and 1:1 interviews with administrators responsible for qualification systems, which lead to simulate the qualification system for elementary and maintenance tasks model of NCS and corporate, and establish NCS based corporate qualification for elementary and maintenance system manual, and suggested recommendation to promote this standard manual for use by analyzing current practices.

• Structural Engineering and Mechanics
• /
• v.68 no.3
• /
• pp.335-344
• /
• 2018

The execution of an experiment is a complex affair. It includes the preparation of test specimens, the measurement process itself and also the evaluation of the experiment as such. Financial requirements can differ significantly. In contrast, the cost of numerical simulations can be negligible, but what is the credibility of a simulated experiment? Discussions frequently arise concerning the methodology used in simulations, and particularly over the geometric model used. Simplification, rounding or the complete omission of details are frequent reasons for differences that occur between simulation results and the results of executed experiments. However, the creation of a very complex geometry, perhaps all the way down to the resolution of the very structure of the material, can be complicated. The subject of the article is therefore a means of creating the material structure of concrete contained in a test specimen. Because a complex approach is taken right from the very start of the numerical simulation, maximum agreement with experimental results can be achieved. With regard to the automation of the process described, countless material structures can be generated and randomly produced samples simulated in this way. Subsequently, a certain degree of randomness can be observed in the results obtained, e.g., the shape of the failure - just as is the case with experiments. The first part of the article presents a description of a complex approach to the creation of a geometry representing real concrete test specimens. The second part presents a practical application in which the numerical simulation of the compressive testing of concrete is executed using the generated geometry.

• Journal of Digital Convergence
• /
• v.8 no.1
• /
• pp.55-69
• /
• 2010

This thesis looks closely at the moderating effect of individual variables while we analyzed how corporate's ethics policies have influence on his ethical decision-making behaviors. The subjects of the research were full-time employees (n=211) in the Seoul metropolitan region. The research model was substantiated through statistical analysis of credibility and validity, correlation, variance, and moderated regression analysis (MRA). This study found that within an organization with a code of ethics, the level of enforcement of the code and the level of employee awareness of core values sought by the company determined the level of influence of the code on ethical decision making. In other words, internal factors exerted a greater influence than external evaluation of a corporation's ethical decision making practices and therefore, it is necessary for decision-making practices to be transparent and recognized by the members within an organization. The study also found that the employee's awareness about the long-term visions of the company at a higher level and the employees who have a locus of control to their members internally acted as independent variables as well as control variables on the ethical decision-making. In addition, there were great differences in the level of ethical decision-making among the variables used as controls, which means these differences were related to the individual variables. Accordingly, in order to get ethical decision-making practices at a higher level, a education & training program will be designed and implemented variously as considering on the particular characteristics of the control variables we used in this study.

• Journal of the Korean Society of Radiology
• /
• v.6 no.6
• /
• pp.455-464
• /
• 2012

This study suggested evaluation of approximately exposure to low-dose ionization radiation from medical images using a computed radiography (CR) system in standard X-ray examination and experimental model can compare diagnostic reference level (DRL) will suggest on optimization condition of guard about medical radiation of low dose space. Entrance surface dose (ESD) cross-measuring by standard dosimeter and optically stimulated luminescence dosimeters (OSLDs) in experiment condition about tube voltage and current of X-ray generator. Also, Hounsfield unit (HU) scale measured about each experiment condition in CR system and after character relationship table and graph tabulate about ESD and HU scale, approximately radiation dose about head, neck, thoracic, abdomen, and pelvis draw a measurement. In result measuring head, neck, thoracic, abdomen, and pelvis, average of ESD is 2.10, 2.01, 1.13, 2.97, and 1.95 mGy, respectively. HU scale is $3,276{\pm}3.72$, $3,217{\pm}2.93$, $2,768{\pm}3.13$, $3,782{\pm}5.19$, and $2,318{\pm}4.64$, respectively, in CR image. At this moment, using characteristic relationship table and graph, ESD measured approximately 2.16, 2.06, 1.19, 3.05, and 2.07 mGy, respectively. Average error of measuring value and ESD measured approximately smaller than 3%, this have credibility cover all the bases radiology area of measurement 5%. In its final analysis, this study suggest new experimental model approximately can assess radiation dose of patient in standard X-ray examination and can apply to CR examination, digital radiography and even film-cassette system.

• Journal of Intelligence and Information Systems
• /
• v.18 no.4
• /
• pp.97-116
• /
• 2012

Conceptual modeling is an important step for successful system development. It helps system designers and business practitioners share the same view on domain knowledge. If the work is successful, a result of conceptual modeling can be beneficial in increasing productivity and reducing failures. However, the value of conceptual modeling is unlikely to be evaluated uniformly because we are lack of agreement on how to elicit concepts and how to represent those with conceptual modeling constructs. Especially, designing relationships between components, also known as part-whole relationships, have been regarded as complicated work. The recent study, "Representing Part-Whole Relations in Conceptual Modeling : An Empirical Evaluation" (Shanks et al., 2008), published in MIS Quarterly, can be regarded as one of positive efforts. Not only the study is one of few attempts of trying to clarify how to select modeling alternatives in part-whole design, but also it shows results based on an empirical experiment. Shanks et al. argue that there are two modeling alternatives to represent part-whole relationships : an implicit representation and an explicit one. By conducting an experiment, they insist that the explicit representation increases the value of a conceptual model. Moreover, Shanks et al. justify their findings by citing the BWW ontology. Recently, the study from Shanks et al. faces criticism. Allen and March (2012) argue that Shanks et al.'s experiment is lack of validity and reliability since the experimental setting suffers from error-prone and self-defensive design. They point out that the experiment is intentionally fabricated to support the idea, as such that using concrete UML concepts results in positive results in understanding models. Additionally, Allen and March add that the experiment failed to consider boundary conditions; thus reducing credibility. Shanks and Weber (2012) contradict flatly the argument suggested by Allen and March (2012). To defend, they posit the BWW ontology is righteously applied in supporting the research. Moreover, the experiment, they insist, can be fairly acceptable. Therefore, Shanks and Weber argue that Allen and March distort the true value of Shanks et al. by pointing out minor limitations. In this study, we try to investigate the dispute around Shanks et al. in order to answer to the following question : "What is the proper value of the study conducted by Shanks et al.?" More profoundly, we question whether or not using the BWW ontology can be the only viable option of exploring better conceptual modeling methods and procedures. To understand key issues around the dispute, first we reviewed previous studies relating to the BWW ontology. We critically reviewed both of Shanks and Weber and Allen and March. With those findings, we further discuss theories on part-whole (or part-of) relationships that are rarely treated in the dispute. As a result, we found three additional evidences that are not sufficiently covered by the dispute. The main focus of the dispute is on the errors of experimental methods: Shanks et al. did not use Bunge's Ontology properly; the refutation of a paradigm shift is lack of concrete, logical rationale; the conceptualization on part-whole relations should be reformed. Conclusively, Allen and March indicate properly issues that weaken the value of Shanks et al. In general, their criticism is reasonable; however, they do not provide sufficient answers how to anchor future studies on part-whole relationships. We argue that the use of the BWW ontology should be rigorously evaluated by its original philosophical rationales surrounding part-whole existence. Moreover, conceptual modeling on the part-whole phenomena should be investigated with more plentiful lens of alternative theories. The criticism on Shanks et al. should not be regarded as a contradiction on evaluating modeling methods of alternative part-whole representations. To the contrary, it should be viewed as a call for research on usable and useful approaches to increase value of conceptual modeling.

• The Korean Journal of Air & Space Law and Policy
• /
• v.28 no.1
• /
• pp.73-96
• /
• 2013

ICAO's Universal Safety Oversight Audit Programme (USOAP) was initially launched in January 1995, in response to widespread concerns about the adequacy of aviation safety oversight around the world. The recent reduction in aircraft accidents and effective role that is evaluated on the basis of these results, and in 2013 the existing 'snapshot approach' to 'regular monitoring system (USOAP-Continuous Monitoring Approach)' was converted to. ICAO aviation safety assessment of the state in today's international community 'aviation safety credibility' as objective indicators to judge the enormous impact on the aviation industry, the state is not satisfactory, especially if the results of the evaluation and expansion of code-share airline ban, reduced international air transit passengers, including premium increases business and economic penalties should. In addition, ICAO implementation of the existing laws and regulations(Prescriptive Approach), but based on the Risk-based prevention model, Proactive Approach introduced the concept of aviation safety system, including international aviation safety policy has been to switch paradigms. This new ICAO international aviation safety policy also applies to the Government of the Republic of Korea in line with the aviation safey policies have changed. In particular, the systematic implementation of safety management for the existing laws and regulations in the center of the safety oversight system of risk-based introduction of the concept of proactive safety management, and According to international standards ICAO aviation service providers operate their own Safety Management System was set out in Aviation Law ever. In addition, the aviation safety is at the center of the field of the safety of aircraft operations and maintenance for the promotion is promoting various safety policies. This new paradigm shift in the international aviation safety policy in line with our state in the international community with the most exemplary aviation safety system firmly established itself as a model, the Government will strengthen the competitiveness of our aviation plans to support. To do this, the government, airlines, aviation officials try all the practical effect would be expected.