• 한국생산제조학회지
• /
• 제23권2호
• /
• pp.206-212
• /
• 2014

Liquid silicone rubber (LSR) has been widely used in automotive, electrical, and medical components. Thus, research on the use of LSR in the injection molding process is required to obtain high-quality and high-performance products. In this study, a mold was fabricated to examine the effects of the process parameters on the molding and mechanical properties of LSR parts. A computer-aided engineering analysis was used to optimize the air vent depth and curing temperature to decrease the flash at the air vents caused by the low viscosity of LSR. Temperature and pressure sensors were mounted in the mold to determine the effects of the process parameters on the temperature and pressure in the cavity. The tensile strength of the LSR parts was also examined in relation to the process parameters.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권3호
• /
• pp.262-268
• /
• 2014

본 연구는 2MW급 풍력 발전기용 고속커플링의 요구조건인 유연성과 절연성 및 과부하시 기능부품의 파손을 방지하기 위한 동력 차단기능을 만족하기 위한 구조설계와 검증에 관한 것이다. 커플링의 유연성과 절연기능은 강도와 유연성 및 절연성을 동시에 가지는 유리섬유강화플라스틱을 이용하여 설계하였으며 유한요소해석을 통하여 원소재 두께를 최적화하였다. 또한 이상 토크 발생시 동력전달을 차단하기 위한 토크리미터를 마찰차 형식으로 설계하였다. 시제품의 성능평가를 통하여 설계변수의 타당성을 검증하였다.

• 대한기계학회논문집A
• /
• 제41권10호
• /
• pp.975-981
• /
• 2017

알루미늄 합금과 같은 경량소재의 적용을 통한 무게 감소는 연료절감과 대기 오염 감소에 기여할 수 있다. 알루미늄 합금 재료는 피로수명에 대한 강도 측면에서 철강(steel) 소재에 비하여 취약한 단점을 가지고 있다. 부품들의 안전성을 희생시키지 않고 자동차 부품 경량화를 이루기 위해 많은 연구자들이 보다 가볍고 강한 서스펜션 링크들에 관한 연구를 진행해 왔다. 본 연구에서는 기존 STKM11A 철강소재로 설계된 토크 스트럿을 245 MPa의 인장강도 소재인 알루미늄 합금(A356) 소재로 대체하기 위한 경량화 설계 과정에 대하여 von-Mises 응력 변화를 분석하여 연구하였다. 최적화된 설계는 경량화 이전 강재로 설계된 링크보다 42% 이상 경량화 시킬 수 있었으며 이는 토크 스트럿 개발의 안전한 경량화 설계조건 및 경량화 설계에 대한 가이드에 참고가 될 수 있을 것이다.

• 디자인학연구
• /
• 제9권
• /
• pp.801-810
• /
• 1994

Design Problems are often both multidimensional and highly interactive. Very rarely does any part of a designed thing serve only one purpose. The activity of designing is thus a goal-directed activity and normally a goal-directed problem-solving activity. This means, problem solving is finding a way to get from some initial situation to a desired goal. Designers are transforming agents within a society whose goals are to improve the human condition through physical metamorphosis. Many theorist have agreed that designing involves problem solving or decision making. Accordingly evaluation plays an essential role in design activity. The evaluation factors include all attributes that have levels specified by quantitative and qualitative objectives Alternatives in multi-objective decision prOblems generally possess numerous attributes by which they can be described and compared. The evaluation factors include all attributes that have levels specified by quantitative and qualitative objectives. However since qualitative factors are difficult to quantify as numeral estimates, these factors have tended to be ignored without regard for their importance to human content. We adapted the Accumulative Evaluation Model as an evaluation algorithm for IDES. Industrial Design Evaluation System (IDES) consists of 3 major modules ( 1 Design Element, 2.Matrix, 3.Evaluation). It is intended to be an aid for design evaluation. The luther thinks IDES is a new design evaluation approach which could provide effective rating of design values to make value judgements. It is an attempt to provide industrial designers with access to design evaluation. The author's aim is to produce an Object-Oriented Evaluation System which can guide the designers and decision makers under complex design projects. It uses\ulcorner an Object-Oriented Programming for this prototype, Because of managing complexity (Flexibility and Reusability) and improving productivity(Extensibility & Maintainability and Programming by User) in software development process. The author has chose the C++ because it is a hybrid, rather than pure Object-Oriented Language.

• Nutrition Research and Practice
• /
• 제7권6호
• /
• pp.503-509
• /
• 2013

There is little information on dietary vitamin K intake and nutritional status of daily requirements of vitamin K in Korea. The objective of this study was to investigate the vitamin K intake and major food sources of Vitamin K in Koreans. The survey data from the 2010-2011 Korean National Health and Nutrition Examination Survey of 7,792 subjects (aged 19-64 years) were examined. Total vitamin K intake was calculated from 24-hour dietary recall using a vitamin K food database, Computer Aided Nutritional analysis Program and the United States Department of Agriculture database. The geometric mean of vitamin K was estimated as $322.40{\pm}6.33ug/day$ for men and $271.20{\pm}4.92ug/day$ for women. Daily vitamin K intake increased significantly with age (p for trend < 0.001). The main food source of vitamin K was vegetables (72.84%), including cabbage kimchi (19.26%), spinach (17.38%), sesame leaves (7.11%), radish leaves (6.65%), spring onions (6.28%), and laver (4.82%), followed by seaweed, seasonings, and fat and oils. We observed that the vitamin K intake of Koreans was relatively higher than that reported by other studies in Western countries and differed depending on age.

• 공학교육연구
• /
• 제3권2호
• /
• pp.3-13
• /
• 2000

본 연구는 컴퓨터 지원하의 품질경영(CAQC)교육에 있어서 발생되는 문제점을 분석하여 정리하고, 사례로서 히스토그램을 중심으로 한 학습모델을 개발하였다. 연구의 범위는 일반적으로 널리 통용되고 있는 히스토그램의 작성방법을 MS-엑셀을 활용하여 계산할 경우에 개선되어야할 문제점과 추가되어야 할 이론을 상호연관성 하에서 단계적으로 진행되도록 한 체계화이다. 히스토그램은 추출한 표본의 분포 형태로부터 모집단을 파악하자는 이론이므로 모집단의 분포의 형태를 추정해내기 위한 방법들을 실험과 실습을 통하여 대안을 제시했다. 히스토그램의 활용성을 확대시켜서 생산현장에서 응용할 수 있도록 정규성 검정에 관한 방법, 공정능력지수의 적용기준, PPM기법의 확률계산 등의 이론을 상호보완적으로 연관시켜 추가하였다. 불량원인을 신속하고 정확하게 찾아서 개선하고 관리하는 방법의 도구로서 히스토그램 본래의 목적에 잘 부합될 수 있도록 CAQC교육의 학습모델을 제안한다.

• 대한안전경영과학회지
• /
• 제9권6호
• /
• pp.39-46
• /
• 2007

In this paper we discuss the problems related with the existing electrical safety system that is influenced by all the socio-technical factors including the electrical safety law, government organizations, and their practicing rules and regulations. Sometimes intangible practices also affect the safety issues. It is our intention to incorporate all those factors effectively and systematically in improving the electrical safety system. Since, the problem in nature is so complex, an approach based on the systems engineering (SE) method could be a good candidate. Specifically, as a first step of the SE process we performed the requirements analysis of all the factors mentioned above and some recommendations from the experts in the field. In the work environment utilizing a computer-aided SE tool, the requirements are verified and managed efficiently although the data base is complicated in general in tracking the changes. Next, by analyzing the verified requirements, a functional architecture is developed to achieve an improved electrical safety system. We also did the reverse engineering of the existing electrical safety system to explore potential problems there. The result can also help improve the existing one. Overall, a systematic approach to constructing electrical safety system based on SE is proposed for the first time in this paper. Note that the method described here can be adopted in the study of other safety systems.

• 대한안전경영과학회지
• /
• 제14권2호
• /
• pp.23-33
• /
• 2012

Recent technological advances in the domestic railway industry have turned out to deliver a profound impact on the forefront of other industries as well. Furthermore, the introduction of the high-speed railway systems has made it possible to travel around our country in a day, thereby changing our life styles a lot. However, it has been well recognized that many factors can cause unanticipated accidents during the operation. One of the causes is known to be the human errors made by the train operators in locomotive cabs. The problem is getting more serious as the trains run at high speed. As such, the objective of this paper is on how to improve the work environment of the locomotive cabs. Our approach is based on the systems engineering methodology. Specifically, we first identify the context and scope of the problem to be solved. We then continue our effort in deriving the requirements set to accomplish the improvement. These results are utilized in constructing a computer-aided management system for test and evaluation intended for the improvement. The approach taken and the results obtained in this paper is expected to make a contribution on the route to keeping our nation's technologies on the competitive edges in the high-speed railway systems industry.

• 한국철도학회논문집
• /
• 제12권3호
• /
• pp.382-387
• /
• 2009

일반적으로 고객의 요구사항을 시스템이나 서비스로 구현하는 과정에서 구현된 시스템이나 서비스들이 요구사항을 만족하여 개발 되었는지를 검증하게 된다. 그러나 철도분야의 안전체계나 안전기준을 개발하는 국가연구개발프로젝트의 경우 일반적인 검증 프로세스를 활용하여 이러한 성과물을 검증하는데 많은 한계가 있다. 본 연구에서는 국가연구개발프로젝트를 통해서 산출되는 안전체계, 안전기준, 프로세스 등의 성과물에 대한 체계적이고 효과적인 검증 프로세스를 제시하였으며, 성과물 검증 프로세스의 결과물을 전산 관리할 수 있는 방안 또한 제시하였다.

• 한국철도학회논문집
• /
• 제12권3호
• /
• pp.376-381
• /
• 2009

일반적으로 프로젝트를 수행하는 과정에서 적절한 기술 계획에 따라 진척도 및 성과에 대한 기술검토를 규칙적으로 실시하게 된다. 그러나 일정 시점에서 수행되는 기술검토를 진행하는 과정에서 불명확한 진척도 및 성과 보고, 의견의 불일치, 시간지연 등 여러 가지 문제가 발생한다. 이러한 문제를 해결하기 위해 규칙적인 기술검토 이전에 동료검토를 진행하게 된다. 본 연구에서는 연구개발을 수행하는 과정에 활용되는 효과적인 동료검토 프로세스를 개발하였으며, 추가적으로 동료검토에 관한 일반적인 오해와 개선방안에 대해 서술하였다.