Browse > Article
http://dx.doi.org/10.7735/ksmte.2014.23.2.206

Effects of Variation in Process Parameters on Cavity Pressure and Mechanical Strength of Molded Parts in LSR Injection Molding  

Park, Hyung Pil (Molds & Dies Technology R&BD Group, Korea Institute of Industrial Technology)
Cha, Baeg Soon (Molds & Dies Technology R&BD Group, Korea Institute of Industrial Technology)
Lee, Jeong Won (Molds & Dies Technology R&BD Group, Korea Institute of Industrial Technology)
Ko, Young Bae (Molds & Dies Technology R&BD Group, Korea Institute of Industrial Technology)
Kim, Sang Gweon (Molds & Dies Technology R&BD Group, Korea Institute of Industrial Technology)
Jung, Tae Sung (Department of Mechanical Design, Inha Technical College)
Kim, Dong Han (Department of Mechanical Engineering, Ajou University)
Rhee, Byung Ohk (Department of Mechanical Engineering, Ajou University)
Publication Information
Journal of the Korean Society of Manufacturing Technology Engineers / v.23, no.2, 2014 , pp. 206-212 More about this Journal
Abstract
Liquid silicone rubber (LSR) has been widely used in automotive, electrical, and medical components. Thus, research on the use of LSR in the injection molding process is required to obtain high-quality and high-performance products. In this study, a mold was fabricated to examine the effects of the process parameters on the molding and mechanical properties of LSR parts. A computer-aided engineering analysis was used to optimize the air vent depth and curing temperature to decrease the flash at the air vents caused by the low viscosity of LSR. Temperature and pressure sensors were mounted in the mold to determine the effects of the process parameters on the temperature and pressure in the cavity. The tensile strength of the LSR parts was also examined in relation to the process parameters.
Keywords
LSR (Liquid silicone rubber); Curing; Injection molding; Flash; Tensile strength;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Haberstroh, E., Michaeli, W., Henze, E., 2002, Simulation of the Filling and Curing Phase in Injection Molding of Liquid Silicone Rubber (LSR), J. Reinf. Plast. Comp. 21 461-470.   DOI   ScienceOn
2 Tarinee, N., Polchit, B., 2006, The Effect of Curing Parameters on the Mechanical Properties of Styrene-NR Elastomers Containing Natural Rubber-Graft-Polystyrene, J. Kasetsart. 40 7-16.
3 Rahul, J., Simranpreet, S. G., 2012, Optimization of Vulcanization Process in Windshield Weather Rubber Strip Application, Int. J. Adv. Eng. Tech. 3 67-71.
4 Rey, T., Chagnon, G., Cam, J.-B., Favier, D., 2013, Influence of the temperature on the mechanical behaviour of filled and unfilled silicone rubbers, Poly. Test.. 32 492-501.   DOI   ScienceOn
5 Yuanxiang, Z., Jianyi, W., Haihang, C., Qiong, N., Qinghua, S., Yunshan, W., 2009, The Influence of Pre-stressing on Breakdown Characteristics in Liquid Silicone Rubber J. Electro. 67 422-425.   DOI   ScienceOn
6 Menges, G., Michaeli, W., Mohren, P. 2000, How to Make Injection Molds, HANSER, USA
7 Rubber Fabrication Solutions, 2001, Injection Moulding of SILASTIC Liquid Silicone Rubber, Dow Corning Corporation.
8 Lee, S., Kang, J. J., Lee, J., Hong, S. Ko, J. S., Lee, J., Noh, J., 2012, Silicone Injection Mold & Molding Technology for Super-hydrophobic Curved Surface J. Kor. Soc. Prec. Eng. 29 13-18.   과학기술학회마을   DOI   ScienceOn
9 Song, M., Kim, H., Kang, J., Kim, K., 2011, Finite Element Analysis of Residual Stress Evolution during Cure Process of Silicone Resin for High-power LED Encapsulant, J. Kor. Soc. Prec. Eng. 28 219-225.   과학기술학회마을