• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.6
• /
• pp.550-557
• /
• 2001

There are several applications and error analysis methods using GPS(Global Positioning System) In most analysis positioning and timing errors are represented as the multiplication of DOP(Dilution Of Precision) and measurement errors, which are affected by the receiver and measurement type. Therefore, lots of DOPs are defined and used to analyze and predict the performance of positioning and timing systems. In this paper, the relationships between these DOPs are investigated in detail, The relationships between GDOP(Geometric DOP), PDOP(Position DOP) and TDOP(Time DOP) in the absolute positioning are de-rived. Using these relationships, the affect of clock bias is analyzed. The relationships between RGDOP(Relative DOP) and PDOP are also derived in relative positioning where the single difference and double dif-ference techniques are used. From the results, it is expected that using the common clock will give better performance when the single difference technique is used while the effects of clock is eliminate when the double difference technique is used. Finally, the error analyses of dual frequency receivers show that the narrow lane measurements give more accurate results than wide line of or L1. L2 independent measurements.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.644-650
• /
• 2001

A remotely located synchronization system which is locked to the remote master clock has been implemented by using GPS Common-View technique. The measurement results showed that the accuracy of the remote synchronization system could be kept within a few parts in $10^{-12}$ and MTIE(Maximum Time Interval Error) met the ITU-T Recommendation(G.811). A prototype system having fully automatic operational functions has been realized up to now and is expected to be used in the network synchronization in the near future.

• Journal of Communications and Networks
• /
• v.7 no.1
• /
• pp.1-12
• /
• 2005

Ethernet is being deployed in metropolitan area networks (MANs) as a lower-cost alternative to SONET-based infrastructures. MANs are usually required to support common communication services, such as voice and frame relay, based on legacy synchronous TDM technology in addition to asynchronous packet data transport. This paper addresses the clock synchronization problem that arises when transporting synchronous services over an asynchronous packet infrastructure, such as Ethernet. A novel algorithm for clock synchronization is presented combining time-stamp methods used in the network time protocol (NTP) with signal processing techniques applied to measured packet interarrival times. The algorithm achieves the frequency accuracy, stability, low drift, holdover performance, and rapid convergence required for viable emulation of TDM circuit services over Ethernet.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.12
• /
• pp.913-917
• /
• 2009

Flash memories have asymmetric I/O costs for read and write in terms of latency and energy consumption. However, the ratio of these costs is dependent on the type of storage. Moreover, it is becoming more common to use two flash memories on a system as an internal memory and an external memory card. For this reason, buffer cache replacement algorithms should consider I/O costs of device as well as possibility of reference. This paper presents WWCLOCK(Write-Weighted CLOCK) algorithm which directly uses I/O costs of devices along with recency and frequency of cache blocks to selecting a victim to evict from the buffer cache. WWCLOCK can be used for wide range of storage devices with different I/O cost and for systems that are using two or more memory devices at the same time. In addition to this, it has low time and space complexity comparable to CLOCK algorithm. Trace-driven simulations show that the proposed algorithm reduces the total I/O time compared with LRU by 36.2% on average.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.4
• /
• pp.771-777
• /
• 2012

This paper proposes a binary arithmetic encoder of CABAC using a Common Operation Unit including the three modes. The binary arithmetic encoder performing arithmetic encoding and renormalizer can be simply implemented into a hardware architecture since the COU is used regardless of the modes. The proposed binary arithmetic encoder of CABAC includes Context RAM, Context Updater, Common Operation Unit and Bit-Gen. The architecture consists of 4-stage pipeline operating one symbol for each clock cycle. The area of proposed binary arithmetic encoder of CABAC is reduced up to 47%, the performance of proposed binary arithmetic encoder of CABAC is 19% higher than the previous architecture.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.1
• /
• pp.64-71
• /
• 2017

This study was designed to evaluate the age, gender, location of trauma, etiology, injury site, types of treatment, elapsed time after trauma, and arrival time of children who visited trauma center of Wonju Severance Christian Hospital. Records of a total of 841 patients who were 0 - 15 years old and received care in the period from March 2011 to October 2015 at the Trauma Center, Wonju Severance Christian Hospital were analyzed. This study showed that traumatic dental injuries were more common in boys and patients between 0 - 3 years old. Under 6 years old, fall was the most common etiology and home was the most common place of trauma. However, fall decreased, and sports and etc increased largely in etiologic factors over 6 years old. Besides, home decreased, and road and kindergarten school increased largely in the place of trauma. Etiology and location of trauma were statistically influenced by the age (p < 0.05). The most commonly affected injury sites were maxillary incisors and lips. The most patients visited trauma center between 18 - 24 o'clock (53.3%), and the least patients visited between 0 - 6 o'clock (4.6%). 51.5% of patients visited the trauma center within 1 hour of sustaining trauma, and 26.8% and 11.5% of patients visited between 1 - 2 hours and 2 - 3 hours respectively. The most common treatment of traumatic dental injuries was observation, and the second most common treatment was suture. Traumatic dental injuries in children exhibit specific epidemiological features according to children's gender, age, and other conditions. These result from combination of social, developmental, and physiologic factors.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.35-41
• /
• 2008

This paper presents the design method of current-mode signal processing for high speed and low power digital audio signal processing. The digital audio processor requires a digital signal processing such as fast Fourier transform (FFT), which has a problem of large power consumption according to the settled point number and high speed operation. Therefore, a current-mode signal processing with a switched Current (SI) circuit was employed to the digital audio signal processing because a limited battery life should be considered for a low power operation. However, current memory that construct a SI circuit has a problem called clock-feedthrough. In this paper, we examine the connection of dummy MOS that is the common solution of clock-feedthrough and are willing to calculate the relation of width between dummy MOS for a proposal of the design methodology for improvement of current memory. As a result of simulation, in case of that the width of memory MOS is 20um, ratio of input current and bias current is 0.3, the relation of width between switch MOS and dummy MOS is $W_{M4}=1.95W_{M3}+1.2$ for the width of switch MOS is 2~5um, it is $W_{M4}=0.92W_{M3}+6.3$ for the width of switch MOS is 5~10um. Then the defined relation of MOS transistors can be a useful design guidance for a high speed low power digital audio processor.

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.2
• /
• pp.123-135
• /
• 1997

An air pollutant emission inventory system for the input preparations of photochemical dispersion model was developed. Using the system, anthropogenic emissions as well as biogenic emissions in the Seoul metropolitan area were calculated. Anthropogenic emission by fuel combustion using regional cosumption data, and the laundries and so forth was estimated. The biogenic emission was estimated based upon meteorological data and the distribution of land use type in the study area. The anthropogenic emission of pollutants was highest in Seoul, and the second highest in Inchon. TSP and $SO_2$ were found large quantities during the winter due to increased consumption of heating oil. NOx and THC were emitted without seasonal variation. Among biogenic emissions, PAR was very common while NO was the least common. PAR, OLE, and ALD2 were emitted in large volumes in coniferous forest areas, while ISOP was emitted in deciduous forest areas. Generally, most biogenic emissions increased during daytime, and peaked between oen and two o'clock. Because of strong solar radiation, emission during the summer was high. Biogenic NO emissions were found to be lower compared to anthropogenic emissons, and other VOC was indicated relatively high. In the study area, among biogenic emissions PAR was found to be 3 times, OLE 8 times,and ALD2 12 times more common than among anthropogenic emissions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.437-444
• /
• 2010

The audio data have been communicated using analog methods or simple protocols. However, with the advent and improvement of various multimedia functions, many audio devices have been integrated into a mobile handset in which interconnection lines are very complicated. Conventional point-to-point connections such as $I^2S$ and PCM demand more power consumption whenever more devices are attached. In this paper, we design a common bus digital audio interface that communicates with only two wires and employs the clock gear method to reduce bus power consumption. The comparison results show that the proposed common bus connection can reduce more than 30% of power consumption as compared with point-to-point connection if more than three devices are connected.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.11
• /
• pp.3124-3130
• /
• 1999

A duplex system enhances reliability by tolerating faults through spatial redundancy. Faults can be detected by duplicating identical tasks in pairs of modules. However, this kind of systems cannot even detect the fault if it occurs coincidently due to either malfunctions of common component such as power supply and clock or due to such environmental disruption as EMI. In the paper, we propose a method to reduce those effects of coincident faults in the duplex controller computer. Specifically, a duplex system tolerates coincident faults by using a sophistication sequencing of scheduling technique with certain timing redundancy. In particular when all tasks should be completed in the sense of real-time, the suggested scheduling method works properly to minimize the probability of faulty tasks due to coincident fault without missing the timing constraints.