• Proceedings of the KIEE Conference
• /
• 2007.04c
• /
• pp.56-58
• /
• 2007

This paper deals with analytical prediction for the cogging torque of permanent magnet machines with multi-pole rotor First. open-circuit field solutions are derived using a magnetic vector potential and a two-dimensional (2-d) polar coordinate systems. On the basis of derived open-circuit field solutions and 2-d permeance functions. we also derive the analytical solutions for the open-circuit field considering stator slotting effects and cogging torque. All analytical results are shown in goof agreement with those obtained from finite element (FE) analyses.

• Proceedings of the KIEE Conference
• /
• 2007.04c
• /
• pp.113-115
• /
• 2007

This paper presents a design notch to reduce cogging torque of interior type permanent magnet motor. As design notch on rotor of IPM motor, magnetic field from between rotor and teeth of state is changed. By reason of variation magnetic field, cogging torque is generated. Through Fourier formulation of magnetic field on rotor, we found position of notch and manufactured armature that is designed by optimizing analysis. The validity of the proposed design is confirmed with experiments.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.828-829
• /
• 2008

This paper proposes a new pole shaped magnetizing fixture with a non uniform air gap for sinusoidal magnetizing a ring type permanent magnet (PM) to reduce the cogging torque. To obtain more sinusoidal distributed magnetic flux density, the magnetizing fixture's pole shape is optimized by using the sequential response surface method (RSM). And the effects of each design parameter were investigated using the magnetic analysis combined a time stepping finite element method (FEM) with Preisach model. It has been shown, through numerical analysis the optimized modelgives near sinusoidal distributed air gap flux density and drastically reduced cogging torque.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.33-35
• /
• 2002

This paper proposes the optimal design method to reduce the cogging torque of the interior permanent magnet motor using the design of experiment. The slot opening. tooth tips and the pole arc/pole pitch are chosen as factors of the design of experiment in order to find optimal conditions of the interior permanent magnet motor. Finally, the cogging torque of the optimized motor compares with that of the original motor.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.115-117
• /
• 2002

This paper deals with a cogging torque analysis of the Brushless Motor considering axial displacement of rotor. In this paper, 3D EMCN in combination with 2D FEM is proposed to analyze the cogging torque having 3D Phenomenon. And proposed method is accomplished through dividing analysis region between 2D-region and 3D-region. Moreover, difference of both ends of rotor -diameter is considered by proposed method.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.4
• /
• pp.466-471
• /
• 2006

This raper presents a new optimization method combining the genetic algorithm with the response surface method for the optimum design of a Brushless Direct Current motor. The method utilizes a regression function approximating an objective function and the window moving and zoom-in method so as to complement disadvantages of both the genetic algorithm and response surface method. The results verify that the proposed method is powerful and effective in reducing cogging torque by optimizing only a few decisive design factors compared with the conventional stochastic methods.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.7
• /
• pp.643-655
• /
• 1991

The analysis method on air gap permeance distribution, air gap MMF distribution, air gap flux density distribution, cogging torque and BEMF about the skewed stator slots or the skewed rotor magnet segments for BLDCM, respectively, is studied as a function of the skew ratio. The proposed method describes the differences between the skewed stator slots and teh skewed rotor magnet segments for the air gap permeance distribution, air gap MMF distribution and air gap flux density distribution. The reliability of the method is also confirmed by the waveform of the cogging torque and BEMF through experiments. And the result shows that the effects on the cogging torque and BEMF due to the skewed stator slots or the skewed rotor magnet segments are the same. In case of the skewed stator slots, the effects of the variations of the winding resistance and inductance are also studied.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.629-631
• /
• 2000

This paper deals with the design of a inner rotor type Brushless DC (BLDC) motor for Electric Power Steering to reduce the cogging torque. The effect of the design parameters on the characteristic and cogging torque is analyzed by Finite Element Method (FEM). The considered design parameters are as follows : the number of pole and slot. dead-zone and skew angle. and teeth shape. The winding resistance of each motor is calculated and the characteristic curve is derived from considering reactance drop voltage for original model.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.6
• /
• pp.152-157
• /
• 2004

In this paper, an optimum design method is presented for BLDC moor magnet using genetic algorithm(GA) and response surface method(RSM). The cogging torque is calculated by finite element method for the designs obtained by GA and RSM. The results are compared and discussed for the simulation time and the cogging torque.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.2
• /
• pp.298-303
• /
• 2016

In this paper, the vibration source of IPM type BLDC motor was analyzed by finite element method. The main causes of the electrical vibration were RMF(Radial magnetic force) and cogging torque. It was designed model of minimized cogging torque and RMF equilibrium. Design models were selected the optimum model using the design of experiment method. And, the vibration experiment was carried out through prototype machine of each model. Finally, the experimental results were compared with the analysis ones.