• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.476-479
• /
• 2013

$CoSb_3$ with its high electrical conductivity, Seebeck coefficient and rather low thermal conductivity is quite a promising material for thermoelectric conversion applications. A potentially high figure of merit (ZT) can be achieved by a nanostructure evolution of thermoelectric materials. In this work, $CoSb_3$ nanoparticles were synthesized through a thermal decomposition method in cooperation with a hot injection technique. Nano-sized $CoSb_3$ particles were obtained through the thermal decomposition reaction between the pre-heated cobalt-oleate at $320^{\circ}C$ and the injected antimony oleate with room temperature. The results showed that the particle size was increased with increasing synthesis temperature and the crystallinity of particles was improved with temperature but the decomposition of $CoSb_3$ was observed at $320^{\circ}C$. The $CoSb_3$ particles synthesized at $300^{\circ}C$ showed a high purity and an homogeneous shape with average particle size of 26 nm.

• Corrosion Science and Technology
• /
• 제22권2호
• /
• pp.90-98
• /
• 2023

In this study, cobalt oxide (Co₃O₄) and cobalt-doped magnetite (CoFe₂O₄) nanoparticles were synthesized by a hydrothermal method. They were then used as corrosion inhibitors for corrosion protection of AA2024-T3 aluminum alloys. These obtained nanoparticles were characterized by x-ray diffraction, field-emission scanning electron microscopy, and Zeta potential measurements. Corrosion inhibition activities of Co₃O₄ and CoFe₂O₄ nanoparticles were determined by performing electrochemical measurements for bare AA2024-T3 aluminum alloys in 0.05 M NaCl + 0.1 M Na₂SO₄ solution containing Co₃O₄ or CoFe₂O₄ nanoparticles. Corrosion protection for AA2024-T3 aluminum alloys by a water-based epoxy with or without the synthesized Co₃O₄ or CoFe₂O₄ nanoparticles was investigated by electrochemical impedance spectroscopy during immersion in 0.1 M NaCl solution. The corrosion protection of epoxy coating deposited on the AA2024-T3 surface was improved by incorporating Co₃O₄ or CoFe₂O₄ nanoparticles in the coating. The corrosion protection performance of the epoxy coating containing CoFe₂O₄ was higher than that of the epoxy coating containing Co₃O₄.

• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.6439-6444
• /
• 2015

지구온난화 방지를 위해 이산화탄소를 제거하는 다양한 방법 중 이산화탄소 포집 및 저장 기술이 가장 유망한 기술로 부각되고 있다. 이산화탄소 포집 및 저장기술이 상용화되기 위해서는 저가의 효율적인 흡수제 개발이 필수적이다. 본 연구에서는 금속 나노입자를 이용하여 이산화탄소 흡수속도를 촉진하는 연구를 수행하였다. 코발트, 아연, 니켈의 세 가지 금속나노입자를 합성하였으며 나노입자 합성 방법 중 습식법과 건식법에 의한 영향을 비교 분석하였다. pH 변화를 이용한 이산화탄소 흡수 속도 측정 결과 습식법으로 제조한 니켈 금속나노입자가 가장 우수한 이산화탄소 흡수 속도 촉진효과를 보였다. 금속 나노입자를 이산화탄소 포집공정에 적용할 경우 흡수탑의 크기를 작게 하여 경제적인 공정 구현이 도움이 될 것으로 기대된다.

• Bulletin of the Korean Chemical Society
• /
• 제24권1호
• /
• pp.32-36
• /
• 2003

Co nanoparticles were prepared by the reverse micelle technique (NaBH₄reduction of cobalt chloride in a reversed micelle solution of didodecyldimethylammoniumbromide (DDAB)/toluene). The size and the shape of Co nanoparticles could be easily controlled by changing the water contents and micelle concentrations, and the solubility of Co nanoparticles was systematically tuned by choosing appropriate surface capping organic ligand molecules. Furthermore, a novel nanofabrication process was clearly demonstrated, which generated oxide over-coated Co nanorods from Co nanoparticles in organic solution by slow oxidation with an external magnetic field.

• 한국세라믹학회지
• /
• 제53권3호
• /
• pp.367-375
• /
• 2016

A novel strategy for the synthesis of $CoSb_2$ nanoparticles is demonstrated via preparation of novel organometallic complexes. Hydrated cobalt oleate (CoOl) and non-hydrated antimony oleate (SbOl) complexes are synthesized as precursors. The $CoSb_2$ nanoparticles are prepared by hot injection, which involves thermolysis of CoOl and SbOl in a non-coordinating solvent at $320^{\circ}C$. The coordination modes and distinct thermal behaviors of the intermediate non-hydrated SbOl complexes are comparatively investigated by thermo-analytical techniques. When the reaction temperature is increased, the particle size is found to increase linearly. The crystallinity of the $CoSb_2$ nanoparticles prepared at $250^{\circ}C$ is amorphous phase without any peaks. $CoSb_2$ structural peaks start to appear at $300^{\circ}C$ and dominant peaks with high crystallinity are synthesized at $320^{\circ}C$. The potential chemical structures of non-hydrated SbOl and their reaction mechanisms by thermolysis are elucidated. The elemental composition and crystallographic structure of $CoSb_2$ nanoparticles suggest a bimodal interaction of the organic shell and the nanoparticle surface, with a chemical absorbed inner layer and physically absorbed outer layer of carboxylic acid.

• 한국자기학회지
• /
• 제18권2호
• /
• pp.63-66
• /
• 2008

초상자성 코발트 페라이트 나노입자를 제조하여 자화 및 자기엔트로피 변화를 조사하였다. 제조된 시료는 전형적인 입방 스피넬 구조를 띠고 있었다. 5K와 300K에서의 최대 자화는 덩어리 상태에서의 최대 자화보다 작은 값을 가졌다. 시료의 초상자성적 거동은 M vs. H/T 곡선의 겹침에 의해 확인되었다. 열역학적 이론을 바탕으로 자기엔트로피의 변화에 대한 온도 의존성을 도출한 결과, 온도가 높을수록 자기엔트로피의 변화는 더 크게 감소하는 것으로 나타났다.

• 한국재료학회지
• /
• 제22권3호
• /
• pp.118-122
• /
• 2012

We synthesized porous $Co_3O_4/RuO_2$ composite using the soft template method. Cetyl trimethyl ammonium bromide (CTAB) was used to make micell as a cation surfactant. The precipitation of cobalt ion and ruthenium ion for making porosity in particles was induced by $OH^-$ ion. The porous $Co_3O_4/RuO_2$ composite was completely synthesiszed after anealing until $250^{\circ}C$ at $3^{\circ}C$/min. From the XRD ananysis, we were able to determine that the porous $Co_3O_4$/RuO2 composite was comprised of nanoparticles with low crystallinity. The shape or structure of the porous $Co_3O_4/RuO_2$ composite was studied by FE-SEM and FE-TEM. The size of the porous $Co_3O_4/RuO_2$ composite was 20~40 nm. From the FE-TEM, we were able to determine that porous cavities were formed in the composite particles. The electrochemical performance of the porous $Co_3O_4/RuO_2$ composite was measured by CV and charge-discharge methods. The specific capacitances, determined through cyclic voltammetry (CV) measurement, were ~51, ~47, ~42, and ~33 F/g at 5, 10, 20, and 50 mV/sec scan rates, respectively. The specific capacitance through charge-discharge measurement was ~63 F/g in the range of 0.0~1.0 V cutoff voltage and 50 mAh/g current density.

• 방사성폐기물학회지
• /
• 제15권1호
• /
• pp.15-26
• /
• 2017

오염수로부터 자성분리가 가능하며, 방사성 세슘을 효율적으로 제거하기 위한 코발트 페로시아나이드(cobalt ferrocyanide, CoFC) 혹은 니켈 페로시아나이드(nickel ferrocyanide, NiFC)가 도입된 자성입자 흡착제를 제조하였다. $Fe_3O_4$ 나노입자는 공침법을 이용해 제조하였고, $Co^{2+}$와 $Ni^{2+}$ 이온을 입자 표면에 도입시키기 위해 금속이온과 금속 배위결합(metalcoordination)을 하는 카르복실기를 포함한 숙신산(succinic acid, SA)을 자성나노입자(magnetic nanoparticles, MNPs) 표면에 코팅하였다. CoFC와 NiFC는 자성나노입자 표면에 도입된 $Co^{2+}$ 혹은 $Ni^{2+}$ 이온이 hexacynoferrate와 결합하여 형성된다. 제조된 CoFC-MNPs 그리고 NiFC-MNPs는 각각 $43.2emu{\cdot}g^{-1}$, $47.7emu{\cdot}g^{-1}$의 우수한 포화자화 값을 보여주었다. X-선 회절분석(XRD), 퓨리에 변환 적외선 분광분석(FT-IR), 나노입자 입도 분석기(DLS), 투과전자현미경(TEM) 등의 분석을 통해 흡착제의 물성을 파악하고, 세슘에 대한 흡착 성능을 알아보았다. 흡착실험을 평가하기 위해 Langmuir/Freundlich 등온흡착식을 이용해 실험 결과 값을 곡선맞춤 하였고, CoFC-MNPs와 NiFC-MNPs의 최대흡착량($q_m$)은 각각 $15.63mg{\cdot}g^{-1}$, $12.11mg{\cdot}g^{-1}$이다. CoFC-MNPs와 NiFC-MNPs는 방사성 세슘에 대해서도 최저 99.09%의 제거율을 가지며, 경쟁이온의 존재에도 방사성 세슘만을 선택적으로 흡착한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.71-71
• /
• 2011

Dye-sensitized solar cells (DSCs) have drawn great academic attention due to their potential as low-cost renewable energy sources. DSCs contain a nanostructured TiO2 photoanode, which is a key-component for high conversion efficiency. Particularly, one-dimensional (1-D) nanostructured photoanodes can enhance the electron transport for the efficient collection to the conducting substrate in competition with the recombination processes. This is because photoelectron colletion is determined by trapping/detrapping events along the site of the electron traps (defects, surface states, grain boundaries, and self-trapping). Therefore, 1-D nanostructured photoanodes are advantageous for the fast electron transport due to their desirable features of greatly reduced intercrystalline contacts with specified directionality. In particular, anodic TiO2 nanotube (NT) electrodes recently have been intensively explored owing to their ideal structure for application in DSCs. Besides the enhanced electron transport properties resulted from the 1-D structure, highly ordered and vertically oriented nanostructure of anodic TiO2 NT can contribute additional merits, such as enhanced electrolyte diffusion, better interfacial contact with viscous electrolytes. First, to confirm the advantages of 1-D nanostructured material for the photoelectron collection, we compared the electron transport and charge recombination characteristics between nanoparticle (NP)- and nanorod (NR)-based photoanodes in DSCs by the stepped light-induced transient measurements of photocurrent and voltage (SLIM-PCV). We confirmed that the electron lifetime of the NR-based photoanode was much longer than that of the NP-based photoanode. In addition, highly ordered and vertically oriented TiO2 NT photoanodes were prepared by electrochemical anodization method. We compared the photovoltaic properties of DSCs utilizing TiO2 NT photoanodes prepared by one-step anodization and two-step anodization. And, to reduce the charge recombination rate, energy barrier layer (ZnO, Al2O3)-coated TiO2 NTs also applied in DSC. Furthermore, we applied the TiO2 NT photoanode in DSCs using a viscous electrolyte, i.e., cobalt bipyridyl redox electrolyte, and confirmed that the pore structure of NT array can enhance the performances of this viscous electrolyte.